Top Straight Adapter Fitting
PT Coupling Progrip PM Internal Expansion System Series 30VPMCS Carbon Steel Hose Fitting Adapter 3 Victaulic Groove
- Adapter for connecting a hose to a Victaulic joint of the same diameter in a straight run.
- Hose barb on one end and Victaulic groove on the other.
- Plated carbon steel for hardness, strength, and a lower melting point than steel.
- Barbed fitting for a tight seal on hoses.
Check StockPOWERTEC 70175 Dust Collection Hose with Fittings Plus Two Reducers , Black
- ...gned to be small and flexible to help provide greater ease in sanding. Please refer to the detailed images to verify that the size and configuration fits your application or expectations. If you need to connect your shop vac or 2-1/2” dust collection system to a 1-1/2” tool port, an additional 1-1/2” screw on adapter, Powertec 70296, is available. Simply remove the 1”ID adapter and replace it with the additional 1-1/2” ID adapter.
- INCLUDES: (ONE) 10ft dust collection hose, (ONE) 1" pliable plastic hose fitting, (ONE) 1-1/2" pliable plastic hose fitting, (ONE) 2-1/4" ABS dust hose adapter, and (ONE) 2-1/2" ABS dust hose adapter.
- APPLICATION: Allows you to extend the reach of your shop vacuum or dust collecting power tools with a long, flexible and premium quality vacuum hose that is free roaming and able to suck up dust, dirt and debris.
- VERSATILE: Offers a dust collection power tool hose with fittings that work with most small vacuums, shop dust collection systems, orbital sanders, joiners, jigs and other power tools. The nominal 2-1/4” adapter should fit most shop vac ports with a nominal ID of 2-1/4”. Shop Vac ports sizes can vary between different manufacturers. Please refer to the actual adapter sizes before ordering, to verify that it....
Check StockEK-Quantum Torque Rotary 90° - Black 90 Degree Fitting
- EK-Quantum Torque (Adapter Fitting) is a revolvable angled (90°) adapter fitting with G1/4" threads..
- In the form of a cylinder, it is very sturdy and there are zero movements in the revolvable joint..
- This Quantum Line adapter is made out of CNC machined brass while the seal is made by quality rubber O-rings. It is an extremely secure and sturdy....
- The adapter allows for connection of fitting with G1/4" threads to extend tubing possibilities in your water cooled system allowing for easier bends....
- The outer diameter measures 23mm while the installed height is 31.5mm..
Check Stock2pcs Compression Tube Fitting Adapter, Stainless Steel Straight Adapter, Double Ferrule Joint Connector, for Connecting Pipes Fittings(Ф6-Ф14)
- 【Reasonable Design】The quick-screw design of the sleeve has good air tightness and is not easy to leaking..
- 【High-quality Materials】The tube fitting adapter is made of 304 stainless steel, which is resistant to rust and corrosion..
- 【Good Fixability】The design of the middle card board of the compression tube fitting adapter can be fixed without shaking..
- 【The Scope of Application】The tube fitting double ferrule joint connector is an adapter used to connect different types of pipes or fittings..
- 【Easy to Install and Disassemble】The stainless steel compression tube fitting adapter can be quickly installed and removed, making it more convenient to use..
Check StockAir Venturi Foster Female to 1/8-Inch BSPP Male Quick-Disconnect Adapter, 5,000 PSI
- QUICK-DISCONNECT ADAPTER: Add this foster female quick-disconnect adapter to your air-hose fittings to give your air guns more pressure and power! This adapter works with a variety of PCP air guns to keep you prepared for your shooting sessions..
- VERSATILE ADAPTER: This air-fitting adapter has a universal-fitting design that lets you connect your air gun to this quick-disconnect piece. It works with a 1/8-inch BSPP male adapter and has a maximum pressure of 5,000 psi..
- COMPACT PCP ADAPTER: Our adapter air fitting is compact enough that it won't get in your way when you need to refill your high-pressure air guns. Take this small adapter anywhere you go, and attach it to a variety of PCP guns whenever you need to!.
- EASY TO USE: To begin using your quick-disconnect adapter, simply hook up your adapter to your PCP guns. It includes an easy-to-install flow restrictor, and it fills your air guns slowly while reducing the heat build-up in the cylinder..
- AIR VENTURI: Since 2010, we've been an innovator in the air gun industry. Our quality equipment lasts you through years of use. Rely on our air rifle and BB gun accessories to give you a safe and fun shooting experience..
Check StockAnderson Metals 57001-0604 Brass Hose Fitting Adapter 3/8 Hose ID x 1/4 NPT Male
- Adapter for connecting a hose to a male threaded connection of a different diameter.
- Hose barb on one end and male NPT threads on the other.
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
- Barbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads.
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check StockDMT DMfit Acetal Fitting Straight Adaptor “Male Connector” Push to connect 1/2 Tube OD 1/2 NPTF Thread AMC 0707 W ANSI/NSF-51 61 Certificate For Reverse Osmosis RO water system Pack of 10
- Beyond water and food use, fittings can be used with air, gases, vacuum, & liquids. And all connections can be assembled & disassembled repeatedly. A broad of sizes covers a broad scope of applications..
- Straight adapter easily push to connects pipes or fittings of different types in a straight line.
- These fitting have been approved by US ANSI/NSF-51, 61.
- Working Pressure: (16 bar, 230 PSI) Temperature: 34F – 68F.
- Working Max Pressure: (10 bar, 150 PSI) Temperature: 150F.
Check StockLegines 1/4 NPT Male to 3/8 Barb Fitting Brass Barbed Adapter Straight Connector 2 pcs
- Barb adapter for connecting a 3/8" hose to a 1/4" npt male threaded connection of a different diameter.
- Hose barb on one end and male NPT threads on the other.
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
- Barbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads.
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check StockAupoko R12 R22 to R134a Adapters, R134A Refrigerant Tank Adapter Kit with Valve Core Remover, 1/4' Male to 1/2' Female, 1/4’’ SAE Female X 1/2’’ Male Refrigerant Tank Adapters
- ★ FITMENT ---- R134A to R12 fitting adapter refrigerant tank, perfect fit for air conditioning refrigerant system..
- ★ PREMIUM QUALITY ---- The R134A brass vacuum pump adapter is made of high quality brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
- ★ EASY INSTALLATION ---- R134A adapter is quick and easy to install, secure fitting, no-leak connection..
- ★ DIMENSION ---- 1/4" Male to 1/2" Female, 1/4’’ SAE Female X 1/2’’ ACME Male R134A adapter fitting with valve core..
- ★ 1 YEAR WARRANTY ---- Order r134a adapter fitting from Aupoko, we can provide 12 months warranty, should be there any question, please feel free to contact us..
Check StockAluminum Cam and Groove Hose Fitting Type DD 2 with Spool Coupler with 1 PCS Camlock Gasket Fitting 2“ DD
- Straight body with two openings for connecting two hoses or pipes with cam and groove fittings.
- Female cam coupler at either end for connecting to male groove adapters.
- Aluminum for resisting corrosion and tarnishing.
- Cam lock levers for locking the fitting's male groove adapter into female cam couplers.
- Nitrile butadiene rubber seal rated for petroleum service, ethanol to E100, and biodiesel to B20.
Check StockRac Performance 16AN Straight Bulkhead Fitting, 16AN Male to Male Straight Bulkhead Fuel Fitting Adapter, With 16AN Bulkhead Nut Aluminum (16AN, Black)
- 16AN Male to Male Straight Bulkhead Flare Union Fitting Adapter With 16AN Bulkhead Nut Aluminum.
- Made of High Performance Lightweight 6061-T6 billet aluminum material.
- Black Anodized Finish for Durability and Strength.
- Designed to ensure the reliability required in a high pressure steering system.
- Perfect to apply in automotive, industrial, boat/marine etc.
Check StockRac Performance 10AN Straight Bulkhead Fitting, 10AN Male to Male Straight Bulkhead Fuel Fitting Adapter, With 10AN Bulkhead Nut Aluminum (10AN, Black)
- 10AN Male to Male Straight Bulkhead Flare Union Fitting Adapter With 10AN Bulkhead Nut Aluminum.
- Made of High Performance Lightweight 6061-T6 billet aluminum material.
- Black Anodized Finish for Durability and Strength.
- Designed to ensure the reliability required in a high pressure steering system.
- Perfect to apply in automotive, industrial, boat/marine etc.
Check Stock