Top Straight Duct

Nashua 357 Premium Grade Duct Tape: 2 in. x 60 yds. (Silver)

  • Please note that Nashua 357 comes to our converter in log roll format (that is why the tape can be offered in non-standard widths) and because of that rolls will more often than not ship on plain white cores..
  • Nashua 357 Premium Grade Duct Tape is the duct tape professional contractors choose when they require a consistent, trouble-free product. It has high tensile strength and is very durable. Its clean release resists delamination and it conforms to a wide variety of surfaces. It also tears straight, resists curling, and has outstanding performance over a wide temperature range..
  • Low VOC Content and can contribute toward satisfying EQ Credit 4.1 (Low Emitting Materials) under LEED. Nashua 357 uses include HVAC (heating, ventilating, air conditioning) and refrigeration applications..
  • Also sealing of seams and joints in metal air handling systems, sand, and media blasting applications, and the manufacture of flexible duct equipped with metal collars..
  • Adhesion: 95 ounces per inch (to stainless steel test panel). Tensile Strength: 50 pounds per inch (longitudinal). Thickness: 13 mils (carrier, adhesive). Elongation: 13%. Service/Operating Temperature: 40F to 200F..
Check Stock

Builder's Best 010155 Venting. Offset Elbow, Dryer, 4-1/2 In, 1 Cubic Centimeters

  • ...t (length) when fully unfolded. The silicone seal in the STV-90 gives you a sealed dryer connection, making your dryer more efficient while consuming less energy and saving on electricity bills. With our newest STV-90 dryer duct connector design, you can install any 4" vent pipe or 4" flexible dryer hose, curved or straight to match..
  • ☑EASY INSTALLATION: Step 1: Tightly combine the drying hose clamp with the Dryer Vent Hoseto prevent the drying hose clamp from falling off the dryer vent hose.Step 2: Combine the protruding part of the dryer vent elbow with what you just finished in step 1, so that they keep a tight connection.Step 3: Insert the sealing ring into the other interface of the dryer exhaust elbow and finally connect it with the dryer vent.You can also find repair videos on YouTube and follow them to install..
  • ☑PLACE OF USE:Aluminum foil duct dryer ventilation hose is mainly used for duct fan systems of various air circulation and ventilation projects, including hydroponic planting rooms and tents, bathrooms and attics, heating and cooling equipment and other equipment. The STV-90 is used for the air duct connector of the dryer. The strong adhesive silicone seals create a good seal between the pipes and fittings, which can prevent th....
Check Stock

Nashua 398-2 Professional Grade Duct Tape, 27 lbs/in Tensile Strength, 60 yards Length x 2\ Width, Silver

  • Please note that Nashua 357 comes to our converter in log roll format (that is why the tape can be offered in non-standard widths) and because of that rolls will more often than not ship on plain white cores..
  • Nashua 357 Premium Grade Duct Tape is the duct tape professional contractors choose when they require a consistent, trouble-free product. It has high tensile strength and is very durable. Its clean release resists delamination and it conforms to a wide variety of surfaces. It also tears straight, resists curling, and has outstanding performance over a wide temperature range..
  • Low VOC Content and can contribute toward satisfying EQ Credit 4.1 (Low Emitting Materials) under LEED. Nashua 357 uses include HVAC (heating, ventilating, air conditioning) and refrigeration applications..
  • Also sealing of seams and joints in metal air handling systems, sand, and media blasting applications, and the manufacture of flexible duct equipped with metal collars..
  • Adhesion: 95 ounces per inch (to stainless steel test panel). Tensile Strength: 50 pounds per inch (longitudinal). Thickness: 13 mils (carrier, adhesive). Elongation: 13%. Service/Operating Temperature: 40F to 200F..
Check Stock

6\ Adjustable Duct Elbow 90 Degree HVAC - 26 Gauge galvanized sheet metal duct connector, for flexible round tube air ventilation & vent pipe ductwork collar piping ducting fitting

  • HVAC adjustable 90-Degree elbows are used to make turns in runs of round pipe and flexible duct from O (straight) to 90 degrees. Our elbow is made of sturdy high-quality galvanized steel construction and are simple to adjust..
Check Stock

Cenipar Dryer Vent Hose-4 inch Ducting Vent Hose(4 inch 10 feet) with 2 Clamps and STV-90 Dryer Duct Connector Dryer Hose Snap fit 4in vent ducting

  • ...t (length) when fully unfolded. The silicone seal in the STV-90 gives you a sealed dryer connection, making your dryer more efficient while consuming less energy and saving on electricity bills. With our newest STV-90 dryer duct connector design, you can install any 4" vent pipe or 4" flexible dryer hose, curved or straight to match..
  • ☑EASY INSTALLATION: Step 1: Tightly combine the drying hose clamp with the Dryer Vent Hoseto prevent the drying hose clamp from falling off the dryer vent hose.Step 2: Combine the protruding part of the dryer vent elbow with what you just finished in step 1, so that they keep a tight connection.Step 3: Insert the sealing ring into the other interface of the dryer exhaust elbow and finally connect it with the dryer vent.You can also find repair videos on YouTube and follow them to install..
  • ☑PLACE OF USE:Aluminum foil duct dryer ventilation hose is mainly used for duct fan systems of various air circulation and ventilation projects, including hydroponic planting rooms and tents, bathrooms and attics, heating and cooling equipment and other equipment. The STV-90 is used for the air duct connector of the dryer. The strong adhesive silicone seals create a good seal between the pipes and fittings, which can prevent th....
Check Stock

Cenipar Dryer Vent Hose-4 inch Ducting Vent Hose(4 inch 8 feet) with 2 Clamps and STV-90 Dryer Duct Connector Dryer Hose Snap Fit 4in Vent Ducting

  • ...t (length) when fully unfolded. The silicone seal in the STV-90 gives you a sealed dryer connection, making your dryer more efficient while consuming less energy and saving on electricity bills. With our newest STV-90 dryer duct connector design, you can install any 4" vent pipe or 4" flexible dryer hose, curved or straight to match..
  • ☑EASY INSTALLATION: Step 1: Tightly combine the drying hose clamp with the Dryer Vent Hoseto prevent the drying hose clamp from falling off the dryer vent hose.Step 2: Combine the protruding part of the dryer vent elbow with what you just finished in step 1, so that they keep a tight connection.Step 3: Insert the sealing ring into the other interface of the dryer exhaust elbow and finally connect it with the dryer vent.You can also find repair videos on YouTube and follow them to install..
  • ☑PLACE OF USE:Aluminum foil duct dryer ventilation hose is mainly used for duct fan systems of various air circulation and ventilation projects, including hydroponic planting rooms and tents, bathrooms and attics, heating and cooling equipment and other equipment. The STV-90 is used for the air duct connector of the dryer. The strong adhesive silicone seals create a good seal between the pipes and fittings, which can prevent th....
Check Stock

Broan HLB9 External In-Line Blower for Broan Range Hoods Ventilation for Kitchen Home and Commercial Areas 800 CFM

  • DURBALE EXTERNAL BLOWER: External in-line blower for Broan range hoods provides high ventilation and durable construction to meet the needs of your....
  • STRONG OPERATION: Performs at 800 CFM and has a 120 voltage rating for an effective production.
  • EASY INSTALLATION: Unit installs remotely in the interior of the home and can use 8-position mounting brackets or be suspended with special suspension....
  • HIGH QUALITY: Specially designed resilient motor mounts and housing isolation mounts prevent vibration noise to ensure quiet operation.
  • CUSTOMIZABLE DUCT: Flexible duct design allows straight-through or right-angle connections with built-in damper and includes 10" round ductwork....
Check Stock

Broan HLB3 External In-Line Blower for Broan Range Hoods, Ventilation for Kitchen, Home, and Commercial Areas, 280 CFM

  • DURBALE EXTERNAL BLOWER: External in-line blower for Broan range hoods provides high ventilation and durable construction to meet the needs of your kitchen.
  • STRONG OPERATION: Performs at 280 CFM and has a 120 voltage rating for an effective production.
  • EASY INSTALLATION: Unit installs remotely in the interior of the home and can use 8-position mounting brackets or be suspended with special suspension chains for a hassle-free setup.
  • HIGH QUALITY: Specially designed resilient motor mounts and housing isolation mounts prevent vibration noise to ensure quiet operation.
  • CUSTOMIZABLE DUCT: Flexible duct design allows straight-through or right-angle connections with built-in damper and includes 10″ round ductwork transition(s).
Check Stock

Portable Spray Humidifying Fan, 470mL Mini Office USB Desk Misting Cooling Fan, Small Humidification Desktop Fan

  • 【Large inclination fan blade and air duct design】 The USB desk fan is equipped with a large inclination angle fan blade, which can condense stronger wind. The unique air duct design keeps the wind in a straight line, blowing out a long air duct, and you can feel cool in the distance..
  • 【120° automatic head swing, 2-speed swing head adjustment, 4-speed air volume adjustment】 Press the switch knob to turn on the automatic head swing function of the desktop fan. Avoiding direct blowing also increases the speed of indoor air circulation. You can also manually adjust the up and down 30° swing head. Rotate the switch knob to adjust the wind speed, a total of 4 gears..
  • 【Portable and Quiet】The compact shape is convenient for you to use outdoors, and can be powered through the USB interface. Thanks to the design of the fan blades, the desktop fan can achieve high air volume and low noise, and can be used in the library..
  • 【USB charging, 4000mAh battery, 4-16 hours running】Using USB power, it can be charged by computer, mobile phone charger, power bank, 4000mAh large capacity battery provides 4-16 hours working time (depending on different speeds)..
  • 【Aromatherapy Fan】This Mini Table Fan is equipped with aromatherapy cotton, you can add your fav....
Check Stock

Techecook STV-90 Dryer Duct Connector fit 4in Vent Ducting - Dryer Snap to Vent 90 Elbow, Indoor Hook-up Dryer Vent Kit

  • ✅【PACKAGE INCLUDES】STV-90 Dryer Vent Connector Kit inclueds 1 x dryer vent elbow, 1 x snap connector, 1 x seal ring. The replacement part is made of silicone and other sturdy materials and well-tested by the manufacturer. You can install any 4" vent pipe or 4" flexible dryer hose, curved or straight to match.
  • ✅【90-DAYS WARRANTY】Risk-free shopping.If the STV-90 Dryer Duct Connector has quality problem or you do not like it, we support return, replacement or refund. We are committed to providing the highest quality products and best prices to create the highest quality life for you. We will try our best to solve the problem. Customer satisfaction is our unremitting pursuit.
  • ✅【COMPATIBLE MODEL】The Dryer Vent 90 Connector 5.5 in. L x 6 in. H x 4.25 in.Fit for most brands.This dryer hose connector is made to be easily cleaned out, and the sturdy construction prevents crushing, ripping or other possible damage to the connector. In the dryer duct Fitting , the silicone sealing strip has strong viscosity, is not easy to fall off, and can form a good seal between the pipe and the joint.
  • ✅【DIY INSTALLATION】The installation needs to use screwdriver. Wear gloves to protect your hands and cut off power and water before you ....
Check Stock

Jonard Tools MDC-14 Micro Duct Tube Cutter

  • MICRODUCT CUTTING: Cuts micro ducts and other types of tubing made from pvc, nylon, polyethylene and other materials quickly and with less effort so cuts are clean and straight.
  • UP TO 14 MM MICRODUCTS: Maximum duct diameter 14 mm (9/16”).
  • STAINLESS STEEL BLADE: Blade is made from heat treated stainless steel for longer life.
  • MAXIMUM COMFORT: Tool is made from polypropylene with tpr (thermoplastic rubber) grips for comfort..
Check Stock

Kitchen Ventilation High

  • DUCT EXPANDER: Designed to fit ventilation fans with a 4" duct connector and 5" round duct systems.
  • EASY CONNECTION: Allows easy connection of a kitchen ventilation fan (with 4" round duct connector) to 5" round ducting.
  • FLAMMABILITY COMPLIANT: Duct expander is UL 94 compliant for flammability to ensure safety.
  • MADE IN USA: This duct expander is made in the USA to ensure highest quality.
  • INVENT FAN: This duct increaser is designed to fit with our InVent fan duct connector assemblies.
Check Stock