Top Straight Shank Collet

3M Mini Mandrel 935, 2-7/8 in x 1/4 in

  • Grips abrasive allowing you to reach tight internal diameters.
  • Versatile mandrel holds a 1inchwide strip of ScotchBrite nonwoven material, cut to the length needed for the application.
  • Shank of the mandrel is secured into the collet assembly or drill chuck of a rotary power tool.
  • Shank fits a 1/4 inch power tool collet or drill chuck.
Check Stock

Hymnorq 1.0 to 10mm Metric Jobber Twist Drill Bits Set of 19pcs Titanium Coated HSS 4241, Straight Shank for General Purpose in Wood Plastic and Soft Metal Sheet

  • 19pcs of Metric Twist Drill Bits - 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm, 6.5mm, 7.0mm, 7.5mm, 8.0mm, 8.5mm, 9.0mm, 9.5mm, 10.0mm. Packed in a plastic bag..
  • HSS 4241 - Made of high speed steel and coated with titanium for rust prevention..
  • Straight Shank and 118° Point Angle - Straight shank for standard drill chucks and collet chuck to hold firmly, assuring accurate centering.
  • Helical flute for swarf to easily get out.
  • standard 118-degree point configuration is ideal for general purpose drilling applications..
  • Usage - Mainly used for drilling wood and plastic, occationally for drilling soft metal like aluminium. Good choice for home DIY, building and engineering use etc..
Check Stock

Fulton 6 inch Long Forstner Bit Extension For Adding Over 5-5/8 inches of Drilling Depth To Your Forstner Bit. For Wood Turners, Furniture, Carpentry and Construction

  • ... forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed a heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet..
  • The forstner bit extension gives you additional 5-5/8 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill..
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers..
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet in....
Check Stock

Fulton 10 inch Long Forstner Bit Extension for Adding Over 8\ of Drilling Depth to Your Forstner Bit Ideal for Wood Turners Furniture Carpentry and Construction (3/8 inch Collet)

  • ...s to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet..
  • The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill..
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers..
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet in....
Check Stock

42950 1/2- inch Router Collet Fit for PORTER CABLE models, Delta, B&D

  • ⭐Features: | For use with 1/2" shank router bits | 1/2" Router collet for use as a replacement or adapter.
  • ⭐Auto-release design prevents "frozen" bits | Accepts 1/2" shank router bits | Auto-release design prevents router bits from sticking in the router.
  • ⭐Designed to minimize bit run-out and enhanced robustness | Helps decrease the amount of lost bits.
  • ⭐Specifications: | Material: Steel | Color: Black | Diameter(in): 0.5" | Outside Diameter(in): 0.5".
  • ⭐Collet Nut size: 1/2" | Length(in): 1.5" | Threads: 20tpi.
Check Stock

3M Cartridge Roll Mandrel - Attaches Abrasive Cartridge Roll to Die Grinder - Power Tool Accessory - 1/8\ x 1\ x 1/4\ - 45119

  • Shank of the mandrel is secured into the collet assembly or drill chuck of a rotary power tool.
  • Mandrel enables access to tight spaces with a cartridge roll.
  • Comes in various pilot diameters and lengths to fit different cartridge rolls.
  • Shank must match the size of the power tool collet or drill chuck.
  • Pilot diameter must match size of cartridge roll.
Check Stock

5pcs 3.9mm HSS Twist Drill, High Speed Steel 6542 Black Oxide Drill Bit with Straight Shank to Cut Through Stainless Steel, General Steel, Cast Iron, Wood, Plastic.

  • High Quality Material Selection, Stable Performance, High-Quality High-Speed Steel Milling And Forming, The Overall Vacuum Heat Treatment, Special Grinding Edge On The Head, Good Positioning, Sharp And Durable Drill Bit..
  • With High Coaxiality And Overall Grinding, The Grinding Drill Bit Is Better Than The Rolling Drill In Both Accuracy And Life, Especially The Toughness Is Increased Several Times, And It Is Not Easy To Break During High Strength Machining..
  • Flutes Form - 2 Flutes Form Helps Clear Chips And Debris Away From The Bit, Decreasing Friction And Heat For A Faster, Cooler Drilling Process, Chatter-Free Design With Staggered Cutting Teeth Ensure The Precise Countersinking And Hole Smooth Clean..
  • Straight Shank And 135° Point Angle - Straight Shank For Standard Drill Chucks And Collet Chuck To Hold Firmly, Assuring Accurate Centering.
  • Helical Flute For Swarf To Easily Get Out.
  • Ideal For General Purpose Drilling Applications..
  • Carburizing And Quenching Process Is Adopted With High Surface Hardness, Strong Fatigue Resistance, Higher Efficiency And Long Service Life.Especially Suitable For Aluminium Alloy, Iron, Plastic, Iron, Wood, 201 Stainless Steel..
Check Stock

Jrealmer 6pcs 1/4 6mm Shank Tungsten Carbide Burr 1/2 12mm Head 5 120mm Long Rotary Burr for Steel Cutting Woodworking Single Groove Set

  • 〖Single Groove〗-single groove tungsten carbide suitable fr processing soft non-ferrous metal,plastic or high tensile steel or hard wood.
  • 〖Length 5"〗-This length of this product let you get to deeper inner holes and places that are difficult to reach.
  • 〖Material〗-YG8 Tungsten Carbide which can get to HRC65-70 and 20Cr material shank.Not easy to deform and high concentricity..
  • 〖Including 6mm Collet〗-Due to our tungsten carbide burr shank is 6mm,we will include 1x6mm electric grinder collet in packing. This collet will make your work easy and it is universal for all electric grinder.
  • 〖Type and Size〗Including C/D/E/F/H/L type and all 1/2"(12mm) tungsten carbide head. This six type is in common use and eough to your work..
Check Stock

MLCS 9464 Router Collet Extension, 1/2-Inch Shank, Accepts 1/2-inch Shank Bits

  • Extend your router bits an additional 2-1/4-inch.
  • Eliminates the dangerous temptation to withdraw the shank from the collet..
  • Use all diameters of 1/2-inch shank bits safely.
Check Stock

GYROS Keyless Mini Adaptor Chuck | ⅛ Inch Straight Shank | With 3 Collets for Precision Drilling | 0” to .098” Capacity for Micro Drill Bits #40-80 | For Dremel, Rotary, and Drilling Tools (45-01803)

  • Accurate & Precise: This Gyros steel micro chuck adapter fits mini drill bits no. 40-80 and has 0” (0 m) - 0.098” (2.5 mm) range, making centering tiny bits and the thinnest wire in a hand, electric drill, or rotary tool simple and uncomplicated..
  • 3 Collets and ⅛” Straight Shank: This small chuck features three collets and a size range of 0” (0mm) to 0.089” (2.5mm), making it suitable for a wide range of tasks. With a popular ⅛ Inch straight shank to employ Flexible shafts, rotating hand tools, hand grinders, and most hand/or motorized equipment and drills..
  • Keyless Design: Our micro chuck adaptors’ keyless design allows you to swap bits and wires fast and effortlessly, streamlining all of your chores. Nickel-plated brass construction reduces friction and allows for better tightening..
  • Professional Use: Craftsmen, model makers, hobbyists, jewelers, and DIY hardware applications all use this type of accessory. This is a must-have item for your toolbox. For the greatest drilling results, pair with the Gyros HSS Wire Gauge Mini Twist Drill Bit Set 45-22010..
  • Manufactured with Quality Control: to ensure The collet cut is centered on this micro adapter chuck it is manufactured with quality control. Ideal for all precision and complicated drill....
Check Stock

5mm Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bit of 2pcs with Straight Shank to Cut Through Hard Metals Such as Stainless Steel and Cast Iron, 5% Cobalt M35 Grade HSS-CO

  • Cobalt Steel – Manufactured From M35 5% Cobalt Steel, With Molybdenum And Cobalt Added To Creates A Hardened Alloy, Measuring Rockwell Hardness Up To 65, For Much Faster Cutting And Extra Longer Life Span, With Up To 10 Times When Compared with an Average HSS Drill Bit..
  • HSS Titanium Coating – Classic HSS Construction With Titanium Coating For Capability And Durability. The Cutting Edge Is Hardened And Honed For Sharpness..
  • Flutes Form – 2 Flutes Form Helps Clear Chips And Debris Away From The Bit, Decreasing Friction And Heat For A Faster, Cooler Drilling Process, Chatter-Free Design With Staggered Cutting Teeth Ensure The Precise Countersinking And Hole Smooth Clean..
  • Straight Shank And 135° Point Angle – Straight Shank For Standard Drill Chucks And Collet Chuck To Hold Firmly, Assuring Accurate Centering.
  • Helical Flute For Swarf To Easily Get Out.
  • Ideal For General Purpose Drilling Applications..
  • For Metalworking – Particularly Successful In Cutting Through Hard Metals(Hardness Less Than Hrc38°) Such As Stainless Steel And Cast Iron, Although They Can Be Used For Softer Materials Like Copper And Aluminium, Too. Not For Hardened Steel And High Carbon Steel..
Check Stock

Thaekuns 42999 1/4-Inch Router Collet Fits for PORTER CABLE models,Delta, B&D

  • ⭐For use with 1/4 inch shank router bits | 1/4 inch router collet.
  • ⭐Material: Steel | Helps decrease the amount of lost bits.
  • ⭐Outside Diameter: 0.25 inch | Collet Nut size: 1/4 inch.
Check Stock