Top Super Flux Waterproof

PSEQT Smoked Len Dually Bed Fender Side Marker LED Lights for F250 F350 F450 F550 (Smoked Lens with 2 Red Lights, and 2 Amber Lights))

  • ✅【Easy to install】Comes with the T10 Plugs, play and plug, no modification needed. Remove old lights and insert the plug directly into the bulb socket. NOTE: If Fender Marking Lights don't fit your stock sockets, please cut off the connector for wiring (Black is Positive, White is Negative)..
  • ✅【High Brightness】Pack of 4 (2Pcs Smoked Amber and 2Pcs Smoked Red ) -Suitable for 1999-2014 Super Duty Trucks Side Marker Fender Marker Dually Bed. Powered by 3 super bright built-in flux LED lights..
  • ✅【Compatibility】Fit for F350 F450 F550 Super Duty Truck 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010. Please reconfirm from the description whether it fit for your cars..
  • ✅【High Quality】The Lens of this fender side marker lights is made of PC material (anti-scratch, IP67 waterproof), no faded with long-time exposure, ensuring long-term use..
  • ✅【Tips of Side Marker Fender Indicator Lights】If they do not light, reverse bulb plug to obtain correct polarity (Just flip plug 180 degrees). The LED plugs into the existing bulb socket instead of the plug in the wiring harness..
Check Stock

3 Pieces No Clean Soldering Flux Pen Rosin Solder Flux Pen for Electronics Tabbing Wiring Solder, Welding Maintenance of PCB Board, No

  • Quantity and size: package contains 3 pieces soldering flux pens, enough quantity for meeting your daily usage and replacement.
  • Each soldering flux pen measures approx. 5.6 inches in length.
  • Safe to use: these flux pens are made of quality material, no leak and safe to use.
  • Low solids content and quality of the activator system results in practically no residue left on the assembly after soldering.
  • No residue will interfere with electrical testing.
  • Useful and practical: no clean soldering flux pen is a novel tool for rework and repair welding.
  • It allows controlled application of flux, thereby removing dirt in the flux bottle.
  • Pen tip of 10 ml with practical designed felt tip.
  • The solid content is low and there is almost no residue.
  • Wide application: rosin solder flux pen is suitable for automotive, computer, work for rework, and through hole solder joints.
  • It is lightweight and would not occupy too much space, suitable pocket size to carry.
  • How to use: before the first time use, you should press the pen tip 1 - 2 times for releasing air, then use no clean solder flux pen to remove the oxidizing wax.
  • After that, you can use the alcohol to clean the pen.
Check Stock

BEEYUIHF Rosin Soldering Paste Flux, Solder Paste Flux, Flux for Soldering, For SMD PCB Soldering & Repair, Electrical Soldering Rosin Flux (1.76oz/50g)

  • BEEYUIHF #7150 Soldering Paste Net weight: (1.76oz/50g) Rosin Solder Paste Flux, made of no acid, Lead-Free, No-Clean, soldering flux paste which is not easy to dump. Rosin Soldering Paste,High Purity,Good helper for repairing and welding..
  • Soldering Flux Paste Feature: No corrosion, high intensity joint, good immersion, good insulation, good soldering properties, smooth welding surface..
  • Flux for soldering application: Maintenance drag soldering, BGA planting tin, maintenance desoldering, electronic components soldering, mobile phone maintenance, mobile phone chip maintenance, LED lighting, home appliance maintenance.Have strong oxide removal effect to gold-copper alloy substrate and wire..
  • #7150 paste flux features: Lead-free, halogen-free, acid-free, no cleaning, less residue, easy to tin, less smoke, help soldering firm, make soldering fluidity better, slightly yellow paste..
  • Solder Flux also a good helper for maintenance enginee. Rosin soldering flux paste metal can packaging, High-quality aluminum box packaging, not easy to break..
Check Stock

Motorcycle Driving Lights 3000LM Super Bright 18SMD Chips Sport Lights Waterproof for Cars ATV Bike Yamaha UTV Truck Boat DC9-85V,Xenon White.(1-Pack).

  • Super Brightness:Composed of two 9-LEDs circular lamp bodies,total of 18 SMD chips,and with a condensing cup/each chip to enhance the condensing property,brightness higher,irradiation distance farther.The longest range of light up to 300 meters.Luminous flux up to 3000 lumens..
  • Waterproof IP68: PVC material body, light weight, built-in waterproof ring, excellent sealing. Place in water for 3 hours immersion test. Suitable for any rainy, snowy or cloudy weather..
  • Flexible Light Angle: Snap bracket is fixed on the metal beam of the front crossbar or round tube of the vehicle. Light body buckle reserves a 10-degree arc slot to adjust the angle of light irradiation. Better choose the installation location..
  • Application:Used for motorcycles, electric bicycles, cars, trucks, boat, ATV,etc.
  • Package & Warranty:Package of 1 bulb,1 switch,1 pair of brackets,screws. Warranty:12months.PLS email us if any question..
Check Stock

SKUNTUGUANG 1 Pair 4.5 Inch Led Fog Light With Angel Eyes Passing Lamps DRL bulb For Motorcycle Fog Lamp Black Fog Light With Angel Eye

  • Light Color:White. Input voltage: DC 10-32 V. Work Temperature:-40~85. Luminous Flux: 1260LM.
  • 6000-6500KCool White LED Output is perfect for lighting up the road. Unique lens design allows the light to focus on the front and sides of your path.
  • Waterproof, dustproof, anti-explosion.It is safe to use on a rainy day.Please feel free to use them.
  • Fit For Electra Glide 1998-2015 Light Color:White. Input voltage: DC 10-32 V. Work Temperature:-40~85. Luminous Flux: 1260LM 6000-6500KCool White LED....
Check Stock

NBPOWER Alarm Lock !Sabvoton Waterproof Controller Programmable, 72v 8000w QS 273 Electric Bike hub Motor Conversion kit with TFT Colorful Display ，Alarm Lock(19inch Rear)

  • We use V3 Curved magnet 8000w motor , has bigger Torque , Higher efficiency , More powerful than V2.
  • The controller is sabvoton sine wave , it can program by the PC ( compatible with Andrord and Iso system ).
  • Function : Cruise Function , E-brakeing Function , Regenerative Brake Function , Voltage.
  • Temperature protection setting for motor & controller.
  • New design TFT Colorful LCD display. with alarm Lock.
  • All parts with fast release waterproof connector ( Controller , display , throttle , Brakes ).
Check Stock

NBPOWER 72v 8000w QS 273 Electric Bike hub Motor Conversion kit with TFT Colorful Display, Sabvoton 72v 150Amp sine Wave Controller,8000W Ebike kit (19inch)

  • sabvoton brand programmable controller ( sine wave design ) , 72v 150A !!!!!!!!.
  • Our controller can program by the PC ( compatible with Andrord and Iso system ) Function : Cruise Function , E-brakeing Function , Regenerative Brake Function , Voltage.
  • Temperature protection setting for motor & controller.
  • Battery capacity , Time , wheel size choose.
  • . All parts with fast release waterproof connector ( Controller , display , throttle , Brakes ).
Check Stock

Solder Flux (56.6 grms)| flux paste | rosin solder | electrical flux paste | solder paste no clean | flux paste for soldering | rosen flux paste | solder flux electrical | flux paste for electronics

  • [Enought Quantity] : This rosin solder flux comes in 1 jar of 56 grams of soldering flux..
  • [Non Corrosive]: This non acid flux is not conductive in dry conditions and has good insulation. Is not corrosive to metal substances such as circuit boards..
  • [Oxidation Resistance] : This solder flux for electronics Anti-oxidation effect on soldering iron head of gold-copper alloy substrate. Solder flux for semi-solid, not easy to dump or waste..
  • [Strong Capability]: This rosin paste flux is suitable for welding instruments, gold, copper, tin, iron and other metals. Ideal for electronic welding, repair and rework..
Check Stock

NBPOWER Alarm Lock !Sabvoton Waterproof Controller with Bluetooth Programmable, 72v 8000w QS 273 Electric Bike hub Motor Conversion kit with TFT Colorful Display + Free Tires(21inch

  • We use V3 Curved magnet 8000w motor , has bigger Torque , Higher efficiency , More powerful than V2.
  • The controller is sabvoton sine wave , it can program by the PC and Bluetooth ( compatible with Andrord and Iso system ).
  • Function : Cruise Function , E-brakeing Function , Regenerative Brake Function , Voltage.
  • Temperature protection setting for motor & controller.
  • New design TFT Colorful LCD display. with alarm Lock.
  • All parts with fast release waterproof connector ( Controller , display , throttle , Brakes ).
Check Stock

J&M Rokker XXR 6.71 Front Speaker kit for 2014 and Newer Harley-Davidson Ultra Classic and Street Glide models - HCRK-6712TW-XXR Red

  • These Rokker 6.71" speakers feature a lightweight, waterproof, one-piece woven fiber driver cone with a super rigid metal basket design..
  • Designed at 2 ohms impedance and an impressive 300 watts maximum input and include custom speaker grills include high output tweeters for crystal....
  • A high density, lite weight, Neodymium magnet structure is specially coated to maintain flux strength integrity even at extreme operating temperatures....
  • Mounting hole pattern and spade electrical connections are exactly the same as the Harley factory design, this is a total plug and play, no....
  • Fits 2014 and Newer Harley-Davidson Ultra Classic, Street Glide and Tri-Glide Trike models..
Check Stock

NBpower Alarm Lock !Sabvoton Waterproof Controller with Bluetooth Programmable, 72v 8000w QS 273 Electric Bike hub Motor Conversion kit with TFT Colorful Display + Free Tires（18inch Rear）

  • We use V3 Curved magnet 8000w motor , has bigger Torque , Higher efficiency , More powerful than V2.
  • The controller is sabvoton sine wave , it can program by the PC and Bluetooth ( compatible with Andrord and Iso system ).
  • Function : Cruise Function , E-brakeing Function , Regenerative Brake Function , Voltage.
  • Temperature protection setting for motor & controller.
  • New design TFT Colorful LCD display. with alarm Lock.
  • All parts with fast release waterproof connector ( Controller , display , throttle , Brakes ).
Check Stock

100PCS-Flux Core Welding Wire for Aluminum,Low Temperature Flux Cored Welding Rod Make Repair Aluminum Radiator,Ideal for Both Beginners And Professionals Alike,752°F(400°C) Melting Point.(13"/1.6mm)

  • Simplified welding process: Flux-cored rods have a low melting point and do not require solder powder, making them easy to use even for beginners..
  • High-quality aluminum brazing: The aluminum brazing rods come with flux already included, ensuring a durable and long-lasting bond..
  • Only for Welding Aluminum - 100Pcs(13"/1.6mm)Flux Core Welding Wire are Suitable for Welding or Surfacing Welding Aluminum, Aluminum Alloy, Aluminum-Magnesium Alloy and Other White Metals,752°F(400°C )Melting Point..
  • Flux Cored Aluminum Welding Rod Make Repair Aluminum Radiator Easily： Flux Core Welding Wire is Commonly Used for Repairing Aluminum Radiators in Automobiles, Motorcycles, Air Conditioners, and Refrigerators, Making it A Versatile Tool to Have In Your Toolbox..
Check Stock