Top Swivel Tip Welding Clamps

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock

The Weekend Brewer Ball Lock Cornelius Corny Keg Gas Line Assembly

  • MUST HAVE for all cornelius keg owners. Allows for CO2 injection of standard ball lock kegs. CM Becker Disconnect ensure a tight seal every time..
  • 5FT OF TUBING allows for your CO2 tank to be placed in a convenient position. Competitor products make you compromise with only 3ft..
  • WORKS WITH ALL STANDARD REGULATORS. Includes swivel nut for mfl regulators. Remove swivel nut for barb regulators..
  • EASY CLEANING by removing the CMB MFL disconnect and running water through the tubing. Most competitor products use barb disconnects with pex clamps which is extremely difficult to clean..
  • Upgrade your current regulator to our ultimate regulator that works with 5 types of CO2 tanks.
  • including paintball, sodastream, CO2 cartridges, and standard welding tanks. Search B071ZNP5BS to learn more..
Check Stock

Amazon Basics Adjustable Metal Face Clamp for Woodworking, Welding, Repairs - 11-Inch

  • Metal face clamp with a 3-inch-wide jaw reach.
  • securely clamps onto a variety of materials up to 2-3/4 inches thick.
  • Thumb screw knobs allow for quickly and easily adjusting the jaw capacity.
  • Swivel pads distribute clamping force evenly and protect surfaces from damage.
  • Ideal for pocket hole joinery, woodworking, welding, and other projects or repairs.
Check Stock

KEILEOHO 6 Pack 11 Inches C Clamp Locking Pliers with Swivel Pads Heavy-Duty Locking Pliers Woodworking Clamps Set Adjustable Nickel Plated C Pliers

  • 6 PCS VALUE PACK - This welding clamp tools set includes 6 heavy-duty C-clamps with sizes of 11 inches, all are made of high-quality nickel-plated alloy steel, which makes them durable and robust, and feature wide opening jaws for greater versatility in clamping a variety of shapes..
  • ADJUSTABLE & SWIVEL PADS - Our adjustable wood working locking pliers provide the versatility of standard locking pliers. Simply turn the screw to adjust the grip, which stays adjusted for repetitive use. Swivel pads hold tapered work, awkward fabricating jobs, and delicate projects without damaging the work surface..
  • PREMIUM MATERIAL - Built with nickel plated alloy steel, these C-clamp locking pliers are designed to be the hardest working tools in your kit. With professional clamping force that won't slip along with forged and hardened alloy steel jaws, our C-clamp welding tools are durable and built to last..
  • TORQUE LOCK DESIGN - Anti-pinch ergonomically designed handles of the C-clamp locking pliers provides comfortable using experience. The contoured handle aids in the torque-lock design, resulting in a secure hold. The hardened wide jaws with better grip force on jobsite material, suitable for wood working, welding and more..
  • WORRY-FREE SHOPPING - Please do not hes....
Check Stock

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

OBPSFY 5 PCS Magnetic Welding Clamps Set,Adjustable V-Pads Fixture Clamp Hand Tools,Magnets On Both Pad Face and Bottom

  • 【Welding Clamp】* Hold tabs,pipe, gussets, plates and odd shaped pieces in position for tack welding.Light duty & tight spot holding! Build, Hold, and Position Steel.Magnetic tack welding Tool，make welding easier..
  • 【Strong Hand Tools】* Adjustable welding magnet, Magnetic welding holder, hold and position round, flat, and square parts in light duty substructure applications! Time saving magnetic tools for welding..
  • 【Material】* The magnetic welding clamps are made of high quality stainless steel, sturdy and durable, can be used for a long time.Magnets on both pad face and the bottom,Can hold the workpiece well for welding work..
  • 【Note】* Avoid Pronlonged exposure to high heat. The Magnets may demagnetize with temp. exceeding 185°F.（Heat Warning）.
  • 【Package】* 5 Pack Magnetic Welding Clamps（2" ，Pull Force 12 lbs.）.
Check Stock

6 PCS C-Clamps 4 Inch Heavy Duty Steel C Clamp - Industrial Strength C Clamp Set for Woodworking Welding Building

  • 【Specification】6-Pack C Clamps, 4-Inch Jaw Opening, Throat Depth: 2 inch, Clamping Force: 1125 lbs..
  • 【Durable Materials】Using solid cast iron, drop forged frame with bright galvanized finish, cast iron frame for strength and durability means long lasting, coated surface preventing rust..
  • 【Easy Adjustments】 The threads resist rust and easy adjustments, smoothly for glides, will offers multiple positions, and without sticking or binding..
  • 【No Damage & Non-Slip】Floating swivel jaw pad, moves freely to adapt to various surfaces, padded clamps that won’t mark surfaces, and prevent the slipping and deviation in the clamping process..
  • 【Application】This heavy-duty c clamp is designed to apply even pressure, secure parts for assembly, fastening, gluing and welding..
Check Stock

Corner Clamps 4Pcs Woodworking 90 Degree Clamps of Cast Metal, Durable Go-tool Right Angle Clamp with Adjustable Jaws Good for DIY Framing, Shelving, Welding, Fish-tanks, Cabinets

  • ...g your busy hands without requiring more aligning and turning..
  • §【Versatility】: The woodworking corner clamps align two pieces of wood, planks, metal, or glass into the clamp at a 90-degree angle. Moreover, the right angle clamps set is suitable for fixing fish-tanks, joining photo frames, installing furniture, welding, and molding, featuring holes in the base that allow them to be mounted to a workbench to add more stability for setup..
  • §【Premium Quality】: The rustproof aluminum-alloy parts of the unit make the angle clamps exceptionally long-lasting and coating on the surface prevents corrosion without worrying subpar paints would rub off on your workpieces. The vise-like design can hold firmly up to 200  pounds of pressure and nylon rounds that keep you from damaging the pieces being joined..
  • §【Accuracy】: The accuracy of the corner clamps allows you to make and reinforce frames with precision featuring maximum clamping range of 3-inch. The swivel jaw can rotate the clamp to adjust work-pieces to different thickness. The reinforced connection and metal diagonal connection part of the angle clamps decrease the excessive pressure which can cause breaking..
  • §【Lightweight】: Weighing in at just over 1.25 pound, corner clamps with lightw....
Check Stock

FOITECHY 4 Pcs Magnetic Welding Clamps,Adjustable V Type Welding Clamps,Adjustable V-Type Fixture,Magnetic V Pads Kit, Magnetic V-sharp Tab Holder Corner for Tack Welding

  • 1.djustable V-Type Fixture Clamp: Magnetic welding clamps provide secure gripping power for rapid,hold and position round, flat, and square parts in light duty substructure applications.
  • 2.4 Pack strong hand magnet(XDV4: 2"),Pull Force 12 lbs. Our V-type magnetic welding clamps are made of high quality stainless steel, sturdy and durable, can be used for a long time.
  • 3.The V-type magnetic welding clamps are suitable for holding tabs, gussets, plates and odd shaped pieces in position for tack welding. They are widely used in doors, tool boxes, windows, wooden boxes, furniture, and other equipment..
  • 4.Heat Warning: Avoid Pronlonged exposure to high heat. Rare-earth Magnets may demagnetize with temp. exceeding 185°F.
Check Stock

Spurtar 6pcs Welding Magnet Welding Magnets and Clamps 75lbsX2+50lbsX2+25lbsX2 Magnetic Welding Holder 3 4 5 Arc Welding Electrode Holders 45 90 135 Degree Mig Welder Welding Accessories and Tools

  • STRONG POWER: 6 pieces different sizes welding magnet supports any ferrous metal object up to 25 lbs, 50 lbs, 75 lbs, satisfying all kinds of needs.
  • SAFE & SECURE: These welding magnets and clamps grip metal and hold it at the angle you need to work safely and efficiently. The welding holders are compact with durable high gloss enamel end plates.
  • THREE ANGLES: Heavy-duty arrow design steel welding magnet square supports material at 45°, 90°, and 135° for easy access. Can be used as double sided holder for welding, assembly and marking work.
  • MULTIPURPOSE: The magnetic welding holder clamps connects parts, freeing up your hands for efficient work and improve work safety, and it can also be used as a floater to separate steel plates.
  • EFFICIENCY: Spurtar Welding Magnet Set Magnetic Tool Holder s ideal welding tools and accessries for being used as holder and positioner in welding, soldering, marking off, pipe installation, making your welding job more efficiently and precisely..
Check Stock

WeldingCity Acetylene Welding Brazing Nozzle 4-W-J (Size 4) with W-J Mixer for Victor J-Series Handles

  • PARAMETERS: 5x5x7mm large triangular welding tip: high temperature resistant 304 stainless steel alloy. Fixed Weld Head: High temperature 316 stainless steel. 5mm standard round mouth..
  • LARGE TRIANGLE WELDING TIP: concave welding tip (the plastic electrode does not move after welding), which is suitable for drawing and fixing before welding..
  • FEATURES: 100% new and high quality, good high temperature resistance, smooth welding surface, non-stick welding rod, no scratches on the welded surface, more beautiful..
  • COMPATIBILITY: Mainly suitable for replacement nozzles for heat guns equipped with diaphragm pumps and vinyl heat guns..
  • APPLICATION: Special welding tip for welding PP, PVC, PE sheets, water tanks, water tanks, plastic pipes, etc..
Check Stock

TRRAPLE Magnetic Welding Clamps, Adjustable V-Type Fixture Clamp, 2/4 Pcs Durable Stainless Steel Tab Holder Corner Butt Welding Panel Clamps Tools

  • HIGH QUALITY WELDING CLAMPS -- Our v-type magnetic welding clamps are made of made of high quality stainless steel, sturdy and durable, can be used for a long time..
  • MAGNETIC HOLDERS -- One rare earth magnets in each pad provide secure gripping power for rapid, and convenient, holding and positioning..
  • EASY TO USE -- Pads pivot to hold onto round, square, or flat metal surfaces, easy to install and apply..
  • PERFECT SPOT WELDING CLAMP -- Hold tabs, gussets, plates and odd shaped pieces in position for tack welding..
  • WIDELY APPLIED -- Widely used on doors, tool boxes, windows, wooden case, furniture and so on..
Check Stock