Top Tank Lorry Flow Meter

SONNLER Argon/CO2 Regulator Flow Meter Compatible With 6.6FT GAS Hose Welding Gas Regulator For CGA-580 Mig Tig Welder Accessories

  • 【Premium Quality Argon Regulator】SONNLER argon flow gauge regulator made of premium durable brass, can withstand harsh environments and has a longer life, won't rust, won't leak, improve your welding skills..
  • 【Wide Application】Ideal for CGA 580 tank fitting, this gas pressure regulator/flowmeter can be used with argon, helium, and CO2 gas tanks (CGA-580 inlet). It's compatible with Miller, Lincoln, Hobart, and most other TIG welders, apply to welding,cutting, chemical, and electronics industries..
  • 【Accurate& easy to read】Adjustable from 0 to 60 cfh (cubic feet per hour), this argon regulator's gas flow is indicated by a ball that moves up and down in the flow tube. The easy-to-read bottle pressure gauge shows how much gas is left in the tank (range 0 to 4000psi). It fits both the female 9/16" x 18 nut or the male 5/8" x 18 fitting.It also comes with a standard 1/4" barbed fitting ..
  • 【Two Connection Ways】You can choose the connection method according to your needs..
  • 【7*24 after-sales service】You'll receive 1 x Argon/CO2 flow meter gas regulator, 1 x 6.6 ft hose, and a 30-day warranty. If there is a problem, please feel free to contact, we have professional engineers to provide support..
Check Stock

CGOLDENWALL Turbine Flow Meter Fuel Meter Digital Flowmeter with FNPT Thread, Flow Meter for Water Diesel Kerosene Gasoline, Flow Rate Range 2.5-26GPM (1 inch Flow Meter)

  • FLOW METER: Before use, please calibrate the flow meter with the liquid to be tested. And the flow rate of the liquid should exceed 2.5 gallons per minute, if the flow rate is too slow, the flow meter cannot measure normally. There is no battery included..
  • MULTI-FUNCTION DISPLAY: High-definition LCD display, can read single cumulative flow, instantaneous flow and total cumulative flow. The clear function can clear the value of cumulative flow, to make sure it is always within the measuring range. If your flow meter cannot work, please contact us in time..
  • HIGH-QUALITY MATERIALS: The aluminum alloy housing is sturdy, durable and corrosion-resistant, which have a long service time. The PCB circuit board make the battery have a long service life, and safe in use. Please NOTE: the LCD display is not water proof.
  • INSTALLATION: The flowmeter can be installed in horizontal and vertical directions, but the flow direction of the liquid needs to be consistent with the direction of the arrow on the flowmeter. There is no direction requirements for the installation of the display screen..
  • MEASURABLE LIQUIDS: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids..
Check Stock

Flame King Tankless Outdoor Portable Propane Gas 10L 2.64GPM Water Heater 68,000 BTU for Hot Water Shower, RV, Camping, Farm, Cabins

  • Fully adjustable control knobs and visual digital meter - Winter/Summer Setting, MIN/MAX Gas Setting, MAX/MIN Water Flow Rate Setting, Digital Water Temperature Meter.
  • Durable steel cased water heater designed to last.
  • On/off water control shower head and 4.5 Feet of Stainless Steel Wrapped Hose to avoid kinks and punctures..
  • Regulator and 4.5 ft. hose included for use with a BBQ propane tank (QCC1 Type-1 Valve.
Check Stock

HighFree Argon Regulator TIG Welder MIG Welding CO2 Flowmeter 10 to 60 CFH - 0 to 4000 psi Pressure Gauge CGA580 Inlet Connection Gas Welder Welding Regulator

  • ▶Flowmeter which is perfect for Mig and Tig Welding. Flow Meters,it fit argon ,co2 and argon/co2 fixed. Inlet connection:CGA580..
  • ▶ Compatiblewith a range of gases, including CO2 as well as argon, and designed to reduce and control pressure levels, this MIG/TIG Welding Argon Regulator really is a must-have for any welder..
  • ▶For convenience, the regulator is equipped with a high pressure weld gauge that allows you to view how much gas is left in the tank, while the ergonomic flow meter can be adjusted for different uses. Applicable for many kinds of gases, such as CO2, argon, etc..
  • ▶ It can screw right into the Argon, Argon/CO2, and Helium Tanks. The Square flow tube reads from 0 - 50 CFH and has large 1 1/2" diameter pressure gauge which reads from 0 - 4000 PSI, so you know how much is left in your tank..
  • ▶ Package include: A Flowmeter with 6.5 foot Hose. Applicable for many kinds of gases, such as CO2, argon, etc..
Check Stock

Argon Regulator Dual Co2 Flowmeter by Manatee for TIG MIG Welder Gas and backpurge 60 SFCH - CGA 580 inlet connection and 5/8 x 18RH outlet fitting - Accurate Gas Metering Delivery System

  • ✔ WHETHER YOU ARE a welding beginner or a seasoned professional, you will surely enjoy using the Argon Regulator Dual Flowmeter! Perfect for hooking....
  • ✔ COMPATIBLE with a range of gases, including CO2 as well as argon, and designed to reduce and control pressure levels, this MIG TIG Welding Argon....
  • ✔ DESIGNED and PERFECT for MIG and TIG Welding Applications. Our Flowmeter is an economic alternative for the demanding customers who wants more....
  • ✔ HAS CGA - 580 Tank fitting so it will screw right into the Argon, Argon/CO2, and Helium Tanks. The Square flow tube reads from 0 - 60 CFH and has....
  • ✔ Welders around the nation agree that the Argon Flow Meter Regulator is key to accurate gas meter readings..
Check Stock

CGOLDENWALL Turbine Flow Meter Digital Fuel Flowmeter with FNPT Inlet/Outlet, 1inch Flow Meter for Water Diesel Kerosene Gasoline, 2.5-26GPM /9-100LPM (1 inch)

  • FLOW METER: the 1 inch flow meter can read instantaneous flow rate, single cumulative flow and total cumulative flows. But it has minimum flow rate requirment, if the flow rate of the tested liquid is lower than 2.5 gal/min, the readings will be inaccurate..
  • TECHNICAL PARAMETERS：① diameter of water inlet: 32mm.
  • ③ the flow speed requirenment for tested liquid: 2.5~26 gal/min.
  • ⑥ max temp of tested liquid: 158°F/70°C.
  • MULTIPLE UNITS: the flow meter provide 4 meauring units for option, which are liter, gallon, pint and quart. The unit defaults to gallons, if the unit is not gallons, please refer to the user manual to change the unit to the needed one..
  • NOT WATER PROOF: the flow meter is not water proof, please keep the display from water during use, to avoid chip damage. We upgraded The flowmeter has been upgraded from never-sleep model to auto-sleep model, which automatically dims the screen when no liquid is flowing through it..
  • WIDE APPLICATION: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids. If there is any problem, please contact us in time..
Check Stock

Bestarc Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Argon Gas Welding AGR-2

  • Argon / CO2 regulator and flow meter, suitable for most argon tanks, argon hose for Miller, Lincoln, Hobart, HTP, and most other welders.
  • The material of body is quality brass. Sturdy and durable.
  • Easy to use, gas regulator can be directly screwed into argon or argon / CO2 tank, ideal choice for MIG TIG welding, chemical and electronics industry.
  • Accurate to read, pressure gauge reads from 0 - 3500 PSI, and the square flow tube reads from 0-25 CFH.
  • We provide high quality products at fair price, one year warranty, professional after-sales service.
Check Stock

500L/H 10W DC 12V CPU CO2 Water Cooler Cooling Pump Tank Heat Exchanger Mute 60 × 160 mm

  • ☞16 DB LOW NOISE—The max noise the water cooling pump tank could generate during work is 16 DB, so quiet and will not bother you.
  • ☞50000 WORKING HOURS—The water cooling pump tank has a working life of 50000 hours, long service time.
  • ☞3 PIN CONNECTOR—3-pin connector could be plugged into various devices, convenient to use. Please do not use voltage higher than dc 12 v.
  • ☞MAX 500 L / H—The max flow rate of the water cooling pump tank is 500 L/H, and max head is 3 meter.
  • ☞3 PIN CONNECTOR—Except the premium product we provide, we also provide considerate after sale service. Please contact us for any problem about our product. It is our pleasure to service you.
Check Stock

VIVOSUN Argon/CO2 Regulator Emitter System with 50 PSI Fixed Max 4000PSI Inlet Pressure Precise Brass Regulator for Gas Control in Hydroponic Grow Tent House Aquarium Welding

  • Durable Material: This regulator’s body is made of high-quality brass, which has high strength, high toughness and corrosion resistance, and strictly tested to ensure long -term use.
  • Precise Control and Measurement: This regulator equipped with a flow meter and pressure gauge.
  • Output flow is indicated by a ball in the flow tube and is adjustable from 10 to 60 SCFH.
  • The pressure gauge ranges from 0 to 4000 PSI and is used to read the amount of gas remaining in the tank.
  • CGA-580 Tank Inlet: The regulator fits standard Argon and CO2 gas tanks with CGA-580 inlet connection, and has a unique filter port design on the CGA-580 mounting port.
  • Two Connection Ways: There are female 5/8" x 18 outlet nut and a standard 1/4" barb adapter, you can choose the connection method of the hose according to your needs.
  • Multiple Applications: Suitable for indoor grow rooms, grow tents, greenhouses and hydroponics to increase CO2 in the growth environment for optimal growth.
  • And ideal for MIG TIG welding, chemical, and electronics industries.
Check Stock

AFW Filters Built Fleck 5600SXT 48,000 Grain Water Softener with Upflow Carbon Filter (8% Resin with Drinking Water RO)

  • ...ystem. Our package also includes an installation manual and technical support. AFW Filters water bottle included with system. Water bottle has sanitizer pack, silicone lubricant, and hardness test strips for the PERFECT install!.
  • WATER SOFTENER – Complete whole house system. Controlled by the Fleck 5600sxt digital meter valve. 48,000 grain high capacity softening system uses 8% resin media. Recommended Service Flow up to 12 GPM (Household sizes of 2-5 people). Fleck valve includes 5 year warranty and tank has 10 year warranty..
  • UPFLOW CARBON FILTRATION – Eco-friendly upflow design provides outstanding filtration without the need to backwash. No backwash means no electricity required, no drain line needed, and no wastewater produced. Provides water filtration and cleaner, safer water. 1.5 cubic ft. High Activity Carbon Media – Carbon media is a media derived from coconut shells that filters water contaminants..
  • REVERSE OSMOSIS SYSTEM – Includes pre-assembled system with filters, complete installation kit with color coded tubing, tank, faucet, and installation/maintenance manual. Everything needed for most installations! Comes with FREE leak detector system. All of our system are assembled with NSF approved pars, filters and media..
Check Stock

Flow Meter,Aluminum Alloy 1/2 inch Digital LCD Display High Accuracy Fuel Diesel Flowmeter Water Flow Rate Sensor,Control and Measure Low Flow for Gasoline,Kerosene,Engine Oil Blue

  • ✔【DIGITAL LCD DISPLAY】The aluminum alloy flow meter has LCD screen display, which can provide clear reading. Meanwhile, the LCD display flow....
  • ✔【READING AND ACCURACY】There aluminum alloy fuel diesel flow meter has intuitive clear reading and high reliability on digital stainless steel....
  • ✔【WIDE COMPATIBILITY】The high accuracy fuel flow meter is suitable for high viscosity liquid media such as diesel, gasoline, kerosene, engine....
  • ✔【RELIABLE QUALITY】The blue LCD display high accuracy aluminum alloy fuel diesel flow meter is 100% brand new and high quality. Meanwhile, it is....
  • ✔【100% WARRANTY】We promises every customer a 100% shopping satisfaction, feel free to reach us if you have any questions about your purchase.We....
Check Stock

MR CARTOOL T110 Automotive EVAP Smoke Machine, 12V Car Fuel System Leak Tester Detector with Built-in Vacuum Pump & Pressure Gauge & Air Flow Meter for All Vehicles

  • ...Air Mode & Smoke Mode】Built-in air pump and smoke generator, so it does not rely on additional air machine, perfect for Mobile Automotive Repair! The smoke can be produced within 10 seconds, dramatically reducing diagnostic time. Smoke output value: 6L/min..
  • 【Flow Meter & Pressure Gauge】Equipped with pressure gauge and adjustable flow meter to help maintenance personnel to observe the current flow volume and pressure for better control the smoke effect. Built-in over-heat protection, if it exceeds working limit (Over 176℉), it will power off automatically..
  • 【Complete Set】Comes with 4.92ft Smoke Hose, EVAP Special Connector, Standard Cone Adapter, Power Cord Clamp, Valve Core Wrench, Airbag Adaptor, Rubber Connector Part, 3.38oz Empty Bottle for test oil(Please notice: Package does not includes the baby oil), Hanging Hook, Various of Soft Rubber and Hard Rubber Hose Plugs..
  • 【Worry-Free After-Sales】MR CARTOOL offers 24-month warranty and 7x24 hours friendly customer service to ensure your shopping experience. No need to pay extra for warranty service, saving you a lot of money! If you have any issues a....
Check Stock