Top Tapped Terminals

Feelers 304 Stainless Steel M8-1.25 Fully All Threaded Rod, Long Threaded Screw, Right Hand Threads, 250mm Length【Pack of 2】

  • Material: Made of 304 stainless steel, ductility at high temperatures, and low magnetic permeability..
  • Package including 2 pcs rod, can be drilled, cut, heated and shaped..
  • Used for assembly fastening, screw into threaded nuts or tapped holes..
  • Different Length of the rod can be widely used in many occasions. Used for assembly fastening, screw into threaded nuts or tapped holes..
Check Stock

ConnectoRF Quick Interchangeable Ratchet Crimping Tool Kit with Plastic Case for Insulated & Non-insulated Wire Terminals Crimper With 5 Die Sets

  • 7pcs heavy duty ergo design interchangeable crimping tool kit for wire terminals, including one frame, 5 die sets for various applications, and one heavy duty plastic case..
  • Easy "push-to-release" tool frame. No extra tools are needed to change dies..
  • Die set#1 (HT-42C) For Non-insulated Terminals or Open Barrel Terminals AWG 20-18/ 16-14/ 12-10.
  • DIN 0.5-1/ 1.5-2.5/ 4-6 mm². Die set#2 (HT-42C3) For D-Sub Terminals AWG 24-30/ 18-22.
  • Die set#3 (HT-42E2) For Pin Terminals Insulated or Non-insulated Ferrules AWG 20/18/16/14/12/10/8/6.
  • DIN 0.5/0.75/1.0/1.5/2.5/4/6/10/16 mm². Die set#4 (HT-42H) For Insulated Terminals AWG 20-18/ 16-14/ 12-10.
  • Die set#5 (HT-42N) For Non-insulated Terminals AWG 18-16/ 14/ 12-10/ 8.
Check Stock

Astro Pneumatic Tool 9477 7-Piece Professional Quick Interchangeable Ratchet Crimping Tool Set

  • C Jaw - Open Barrel Terminals: for AWG 20-18/16-14/12-10 DIN 0.5-1.0/1.5-2.5/4-6mm², D Jaw - Insulated Cord-End Terminals (small AWG.): for AWG 22/20/18/16/14/12 DIN 0.5/0.75/1.0/1.5/2.5/4.0mm².
  • F Jaw - Insulated Cord-End Terminals (Huge AWG.): for AWG 10/8/6 DIN 6/10/16mm², H Jaw - Open Barrel Terminals & D-SUB, V3.5: for AWG 14/22/8 DIN 2.5-0.5/8-10mm².
  • Time saving tools allows faster crimping of terminals and wire. Crimper is easily operated by either left or right hand.
  • Ergonomically designed steel frame handles with contoured rubber grips.
Check Stock

Swpeet 240Pcs Bullet Connectors Kit, 3.9mm Brass Bullet Male & Female Wire Terminals Connector with Insulation Cover for Motorcycle Scooter Car Truck with Insulation Sleeve

  • HIGH QUALITY ---- Terminals made of brass plating tin, high conductivity, anti-oxidation, durable, high-quality plastic protective cover, insulated flame retard. The Insulation sleeve Made of high quality plastic, terminal wiring is completed, the protective cover put on it, the perfect effect of insulation flame retardant, safe and secure. High quality materials to increase your productivity..
  • EASY TO US ---- Only need the wire are connected to the male and female terminals at both ends, and then the male and female terminals docked to complete the wiring easily, the male and female terminals can be disconnected when not needed. Save your work time and increase your productivity, you deserve to have them..
  • WIDE APPLICATIONS ---- We have prepared Molex connector Suitable for many applications, Such as car, motorcycle, truck, marine,quad bike,scooter, boats, electric instruments etc. In these specific applications, the work is very good and the work efficiency is high. Help you solve your actual problems..
  • PRODUCT INFORMATION ---- Male terminals size: 17.3x4mm, female terminals size: 17.6x4.6mm.
  • wiring range: 0.5-1.5mm. Electrical wire connector Color: Silver, Gold.
  • Size: 3.9mm.Come with male bullet terminals & male i....
Check Stock

OTC 4497A Ratcheting Terminal Crimper

  • Heavy-gauge steel crimping tool designed for insulated wire terminal sizes commonly found on cars, trucks, SUVs, Motorcycles, ATVs, and more.
  • Ratcheting action crimps terminals to correct tightness on the wire making crimping fast and easy.
  • Insulated handles with compound mechanical leverage for power.
  • For wire sizes: AWG 22-18 (0.6 mm -1.0 mm) red terminals.
  • AWG 16-14 (1.3 mm - 1.6 mm) blue terminals.
  • AWG 12-10 (2.0 mm -2.6 mm) yellow terminals.
  • High-grade materials ensure quality performance over the lifetime of the tool.
Check Stock

Ampper 24 Pieces Battery Terminal Anti Corrosion Washers, Battery Terminal Post Fiber Washers Protector (12 Red and 12 Black)

  • Compatible: these battery anti corrosion washers are used for 6 - 12 V battery systems, for both top post battery terminals or side post battery terminals and cables..
  • Purpose: used for auto and marine batteries, prevent corrosion around the battery terminals, prolong battery life..
  • Washer size: the inner ring can be dismantled. Outer ring diameter: 45 mm / 1.77 inch.
  • inner ring diameter (before dismantling): 20 mm / 0.79 inch.
  • inner ring diameter (after dismantling) 31 mm / 1.22 inch..
  • Color: Red for positive terminals and black for negative terminals, very easy for distinguish and use..
  • Package: 24 pieces / 12 pairs battery terminal anti corrosion washers: 12 red and 12 black. 100% SATISFACTION: no reason for return or change..
Check Stock

Dia. 4inch 100mm Premium Handwheel with Knob Handle, 3 Spoke Disassemble Hand Wheel Replacement Parts of Industry Machines Mill Drillpress Crank Lathe Table

  • HIGH QUALITY: This product is made of high quality bakelite and is durable.Wear-resistant and not easily deformed.
  • EASY TO INSTALL: This Hand Wheel is bored to the standard shaft diameter for their size, and are also tapped for a Removable Handle..
  • DIMENSIONExternal diameter (Approx.) 200mm / 7.9in.Product dimension: 200*18mm / 7.9*0.7in.
  • STANDARD SIZE: This Hand Wheel is bored to the standard shaft diameter for their size, and are also tapped for a Removable Handle..
  • APPLICATION: Widely used in industrial machine tools, such as milling machine, lathes, grinders etc..
Check Stock

Dokili High Rise Single Plane Intake Manifold for Small Block SBC Vortec 350

  • 【Fitment】Dokili aluminum intake manifold for small block engines using the 1996 and later Vortec (Gen 1+) cylinder heads..
  • 【Features】Dokili intake manifold comes with 360° single plane and high rise designs, providing excellent high RPM power, from 3,000 to 7,500 RPM. It features four corner water ports, a tapped fifth port in the front face, nitrous bosses and dual distributor holddowns..
  • 【Premium Material】Built with natural finish aluminum of superb quality and fit. Permanent mold casting. Angles and straightness comparable to factory manifolds. The port size on this manifold is 2.06" x 1.18". Manifold Height is 6.06"..
  • 【Superior Design】Cast-in bosses on intake runners can be drilled and tapped for use with nitrous. Dual distributor hold-down provisions for extra protection against distributor rotation. Ideal port position allows custom porting for maximum power..
  • 【Package Include】1X SBC Intake manifold. Professional installation in highly recommended..
Check Stock

Mighty Mag Bundle Westhoff 400-1 Base with 45 Pounds Pull and 6 Mounting Locations and Taytools Dial Indicator with 1” Travel

  • Base has a rugged zinc diecast housing which contains a powerful high-quality magnetic assembly with 45 pounds of holding power. It is compact at 4-3/8” x 1” x 1-1/16”..
  • Kit comes with dial indicator with 0.0005" Resolution (half a thousandth), 1.00" total travel with accuracy guaranteed to 0.001" per 1".
  • It contains 6 mounting locations: three with 1/4-20 tapped holes, one 10-32 tapped hole, one 3/8” reamed home and one V-shaped hole to accommodate rods or accessories from 1/8” to 5/16” in diameter..
  • Will accommodate most lathe of machine shop devices and ensure they stay on place for accurate measurements. You will never stop discovering uses and applications for a Mighty Mag..
Check Stock

KSP Rear Lowering Shackle Kit 1 -2 Adjustable Solid Steel Drop kit for Silverado 1500 1999-2019 2WD 4WD 4x4 6-Lug

  • 【Fitment】The adjustable shackle kits will drop 1" to 2" for 1999-2019 Silverado 1500 2WD 4WD (6-Lug only). If you want to buy the shackle for your....
  • 【Solid Quality】Replaceable and greaseable polyurethane bushings for driving performance and longer service life；TIG welding supply better....
  • 【Tapped Zerk Fitting Holes】The holes for zerk fittings are tapped/threaded for more firm and the zerk will not to fall off. Please note that....
  • 【Easy Installation】The install is pretty straight forward and no welding is required. According to different years of Silverdo 1500, lowering kits....
  • 【Sincere Service 】Include 2x Rear Lowering Shackles, 2x grease zerks,Pro Installation Instructions. We offer “30-day refund, 24-month free....
Check Stock

PROCURU 1/2" OD x 24" Long WeatherProof Stainless Steel Gas Flex Connector Kit with SafeGuard Coating for Dryers, Bbq Grills, Water Heaters

  • 1/2" Outer diameter x 24" length (2 ft.) stainless steel gas connector with SafeGuard Coating for anti-corrosion and air-tight protection.
  • (3) Brass fittings included: 1/2" MIP (tapped 3/8" FIP) (2 pcs), and 3/4" MIP (tapped 1/2" FIP) (1 pc).
  • Also included: 4-Mil high-density PTFE sealant tape 1/2" x 520", gas leak detector, installation instructions.
  • Designed for gas dryer, water heater, bbq grills, and other natural and propane gas appliances.
  • 100% leak tested and sealed, CSA certified for indoor and outdoor use for natural, LP, and LP-gas air mixtures.
Check Stock

WINOMO 5 Pairs 4 Gauge Strip Spade Terminal Spade Fork Adapters for Speaker Wire Cable

  • High quality insulated crimp fork terminals connectors, superior electrical contact.
  • 5 pairs of crimp terminals and connectors.
  • 5 red plus 5 black boots of crimpable fork terminals.
  • Premium copper heat tested, gold plated to protect against corrosion.
  • To ensure increased power flow and the highest quality audio without distortion.
  • 4 gauge power/ground wire fork terminals.
Check Stock