Top Tapping Machine Washers

AUTMATCH Pack of 2 D Ring Shackle Isolators Washers Kit 2 Rubber Shackle Isolators and 8 Washers Fits 3/4 Shackle Prevents Rattling Protect Bumper Shackle Cover Black

  • Complete Suite: 2Pcs Red Shackle Isolators & 8 Pcs Thick & Thin Washers Kit Fit For 3/4 Inch D-Ring or Bow Shackle with 7/8 Inch Screw Pin and Protects The Bumper Finishes From Damage.
  • Durable Material: Durable Rubber Material And Which Make The Isolator & Washers Keep Away From Crack, Warp or Corrode, Withstand The Elements of The off-Road Trail or Everyday Driving.
  • Feature: The Isolator Protects the Shackle From Tapping Against A Bumper or Any Other Recovery Point and the Washers Reduce Rattling Noise When The Vehicle Is In Motion.
  • Usage: Snaps Into Place Facilitating Easy Installation or Removal From 3/4 Inch D Ring & Bow Shackles, No Screws or Drilling Are Needed.
  • Guaranteed: All of Our Products Are Backed By Our 100% Satisfaction Guarantee And Please Contact Us For Any Inquiry, We Are Here To Help.
Check Stock

Threading & Tapping attachment-lathe tailstock die holder set Machine Tools MT2

  • Made of High Quality Tool Steel , this is a high quality product for your lathe machine.
  • Used for threading and tapping purpose on the lathe machine.
  • Die Holder Sizes 13/16", 1" & 1-1/2" . Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
  • The Die for threading purpose is hold in the various Die holder sizes. The internal bore threading/ tapping is done by mounting the tap wrench head as....
  • Comes in precisely ground MT2 Shank, , that goes inisde your lathe tailstock & intended job for threading / tapping is hold in rotating chuck..
Check Stock

LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK

  • LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK.
  • Made of High Quality Tool Steel , this is a high quality product for your lathe machine * Used for threading and tapping purpose on the lathe machine.
  • Die Holder Sizes 13/16", 1" & 1-1/2" . * Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
  • Comes in precisely ground MT2 Shank, that goes inside your lathe tailstock & intended job for threading / tapping is hold in rotating chuck. * The Die....
  • The internal bore threading/ tapping is done by mounting the tap wrench head as per tap size between the above advised range is moved toward the....
Check Stock

Smittybilt XRC 4 Steel Fender Flare Kit - 76837

  • Includes both front and rear fenders (4 total).
  • 100% steel construction for extra durability.
  • Black power coated for immediate use and durability or can painted to match your Jeep.
  • Stream line design to help increase suspension articulation while maintaining the street-ability look.
  • Also includes 10 Self-Tapping Screws, 20 10mm Hex Head Bolts, 40 Flat Washers, 20 Lock-Nuts.
Check Stock

LivTee 4 Holes Stainless Steel License Plate Frames 2 PCS Car Licence Plate Covers Automotive Exterior Accessories Slim Design with Bolts Washer Caps for US Vehicles White

  • Product features: Surface painting process, improve texture, simple appearance, fine workmanship, smooth edge polishing without injuring the car and....
  • Stainless steel material: The stainless steel is treated with a 1.2mm thick powder coating to provide long-term protection against corrosion, rust,....
  • Installation: The 4-hole license plate frame is suitable for your car, truck and all types of trailers. Four (4) fasteners are required to secure the....
  • Hardware included: 2 pcs License plate frames, with 12 Screw Caps (plastic), 12 Machine Screws, 12 Washers (plastic), 4 Self-tapping Screws, 1....
  • Purchase with Confidence: Any issues or questions please feel free to contact us, we are always here to satisfy all of you..
Check Stock

Oatey 43793 PVC Saddle Tee Kit 4-Inch x 3-Inch

  • The product is highly durable and easy to use.
  • For tapping into a 3-Inch or 4-Inch Sch. 40 DWV line.
  • Saddle is solvent welded to the existing line and secured with metal V-bolts, washers and nuts provided in the kit.
Check Stock

American Flag License Plate Frame-United States Patriotic Flag Pattern Frames Covers Holders Patriotic Car Decorations(Red Blue)

  • Size: 12.3" x 6.3" ( fits all US standard license plate)..
  • The flag pattern plate frame is made of high-grade aluminum alloy, which is durable and has good resistance to weather and corrosion, could bear high temperature, not easy to deform, keeps in great condition and protect your license plate all the time..
  • The US plate frame holder processed by highest-quality industrial ink spray-painting, with patriotic design and clear American flag pattern, not easy to fade, give you a different visual impact, providing a more fashionable and eye-catching look for your car, looks really attractive!.
  • The patriotic license plate frame is easy to clean and resist rust, and easy to install, no required for special tools and vehicle modifications..
  • Package includes 2 x License Plate Frames.
  • 8 x Screws ( 4 Machine Screws & 4 Self-Tapping Screws).
Check Stock

CoCud Thread Milling Taps 1/4-32 UNEF Thread 2B High Speed Steel Machine 3 Straight Flutes Screw Threading Tool - Applications for Tapping Drilling Machine 1-Piece

  • ... Wide Application --- For threading through holes or shallow blind holes. 3 straight flutes design, rapid downward chip removal. Make new female threads or re-thread damaged female threads in stainless steel, ordinary steel, copper, aluminum, iron, alloy steel, plastic..
  • ★ Machine Taps --- Machine taps are used in tapping machines, vertical drilling and milling machines. M1-M3.5 micro taps process wood and soft metals with lower hardness, mainly used in clocks and watches. Drill holes with a twist drill before tapping..
  • ★ High Speed Steel --- The high speed steel tool has high hardness, high strength, good toughness, wear resistance, and heat resistance. Only the base substrate, without any additional coatings, good for a wide range of applications..
  • ★ Useful Tips --- Control speed based on material hardness. Add appropriate tapping oil for higher quality internal threads and more durable taps. The tapping depth should not exceed 1.5 times the diameter (eg: diameter=6mm (M6), maximum tapping depth=9mm). The tapping angle should be 90 degrees vertical and stable..
Check Stock

CK Formula Black Carbon Fiber Printed Aluminum License Plate Frames, 2 Screw Holes with Install Kit, UV Protection Clear Coat, Weatherproof, 2 Pieces

  • Universal License Plate Fit: Our License plate frames fit perfectly around Standard size American and Canadian license plates. The size of the license plate frame is: 12.2in*6.3in..
  • Rust Proof Carbon Fiber Frame: Glossy finish with UV protection clear coat to protect the frame. Back buckle design, Your car plate is able to slide in and not have to touch the rear of your vehicle..
  • Stable Design: The 4-hole license plate frame is more sturdy, don't worry about falling, let our license plate holder perfectly fit and protect your front and back license plate..
  • Easy to Install: Comes with complete kit, you can install the licenseplate frames conveniently and quickly. No need to purchase additional tools..
  • Package Includes: 2* License Plate Frames, 8* Plastic screw caps, 8* Washers, 4* Stainless Steel Machine screws, 4* Stainless Steel Self-tapping screws, 4* Spacers, 1* Screwdriver.
Check Stock

US STOCK SFX M16R M3-M16 Electric Tapping Machine 1200mm Arm 360° Universal Electric Tapper 0-375RPM/min With 9pcs ANSI Imperial Collets Tap Collets

  • Tapping angle: Universal.Rotation Speed: 0-375r/min(Stepless Speed Regulation) Tapping Capacity Steel: M3-M16 Aluminum: M3-M16 Stainless steel: M3-M16 Working Area Horizontal: 1100mm(43.3inch) Weight: 32KG (70.5lb.)Vertical: 400mm adjustable.
  • Applicable material: alumimum, copper, steel, cast iron, Q235, S136, mold steel, 718H, 40Cr, stainless steel and other metal materials..
  • Standard Accessories Touch Panel Intelligent control system High-Precision Tapping Arm (One Set) 360° Universal Workhead Servo Motor And Reducer ( One Set). Universal Joint(Tapping For a Vertical/Horizontal ) Tap Holder M3-M16 (One Set)9pcs ANSI Collets:1/4", 5/16", 5/32 ",1/16", 3/16 ",7/32 ",3/8", 7/16", 1/2"..
  • Advantages:HD human-machine interface,adjustable speed.Imported servo motor with strong output force.Enhanced reducer with durable gears.Intelligent control system stable and reliable program.Safety torque collet,overload protection device.Deep-hole Tapping Hierarchically.Flexible cutting state,Save Cost..
  • Free Shipping.ETA:7-12 days.No Import Duty.1 year....
Check Stock

CGOLDENWALL Automatic Screw Feeder Machine Tapping Machine Supplier Screwdriver Feeder Microcomputer Control Digital Display Count Applicable Screw Size from M1.0 to M5.0 for Different Types Screws

  • ... screw plate, extracting each screw can save 1.4s with our machine, thus production efficiency can be improved by 4 times..
  • ALMOST SUB FOR YOUR BROAD--With its easy orbital adjustment, the screw machine can handle screws with M1-M5 (< 20 mm) between any specification. Ordinary screw, flat head screws, washers screw, tapping screw and so on, all can be applied to. So it especially suitable for the assembly of electronic processing plants such as toys, communication equipment, electrical appliances, toy auto parts, etc..
  • TWO TYPES OF COUNTING FUNCTION--Cumulative count: when a screw is removed, the machine will automatically count a number.
  • Fixed number counting: users can set the required number of screws. After taking the set number, the machine will beep once and the machine will automatically enter the next cycle of counting. Both method facilitates to count the production capacity and reduce the time for subsequent statistics and settlement..
  • CONVENIENT ADJUSTABLE MACHINE--All-metal supplier silo: sturdy and durable, the height of the brush in it can be adjusted according to the size of the screw.
  • Speed adjustable: Feeding speed can be controlled by adjusting the knob.Seismic distance is small, strong vibration, screw arrived at the front end point, ....
Check Stock

850PCS Screws Assortment kit Drywall Anchors Set Includes 15Sizes Wall Anchors Wood Screws 304 Stainless Steel Machine Screws Washers Nuts Hardware Set

  • MORE SIZES SCREW SET. 850PCS mixed different types of household drywall anchors and screws assortment kit includes: 3 sizes of expanding screw kit, 3 sizes of self tapping screws for metal, 3 sizes of machine screws, 2 sizes of washers, and 1 size of nuts. All screws conform to Phillips crosshead. Metric assorted screws set with case, meet various install needs..
  • TOP-NOTCH DURABLE MATERIAL. Drywall anchor plastic parts made of PE composite material, mechanical screws made of high quality 304 stainless steel material, Phillips flat head wood screws made of mild steel, harder than cheap high carbon steel screws are not easy to break, screws surface galvanized not easy to rust. Washers thickness up to 1.5mm, suitable for any screws in the kit, nut type to fit all sizes of mechanical screws..
  • HOUSEHOLD TYPE. We carefully select these most commonly used categories and sizes according to the daily repair and maintenance needs of the home. Meet your maintenance needs around the furniture house, garage, garden, office and other DIY projects. It is a basic fastener kit that is always available at home..
  • NO-MIX COMPARTMENTS. Thickened storage box and removable nesting dividers. We customized this versatile general screw set with a thickened, sturdy PP plastic box....
Check Stock