Top Tee Connector

Nooelec SAWbird+ NOAA - Premium Saw Filter & Cascaded Ultra-Low Noise LNA Module for NOAA Applications 137MHz Center Frequency

  • SAWbird+ NOAA is a self-contained LNA module designed for capturing beautiful weather images available from NOAA satellites (~137MHz).
  • The module uses 2 ultra-low-noise LNAs and a custom high-performance SAW filter centered at the frequency of interest.
  • SAWbird+ NOAA can be powered in 3 ways: via bias tee, through the on-board microUSB connector, or through DC barrel connector with the included USB to....
  • Though compatible with most SDRs, we recommend use in conjunction with NESDR SMArTee (available on Amazon, product ID B079C4S2BT).
  • Includes free aluminum enclosure, male SMA to male SMA adapter and USB to DC barrel connector adapter. Full 2 year warranty and support direct through....
Check Stock

AC PERFORMANCE Stainless Steel -3 AN 3/8x24 Male Flare Union Splits Tee Block With Lug/Mount Tab/Locator, -3 AN to 2x AN3 Male Flare Coupling Union All Sides Hose Fitting

  • Male -3 AN to 2 x -3AN Flare (JIC -3, 3/8×24 thread) with Tab T Pipe Tee Block Hose Fitting Adapter.
  • Works with -3AN TEFLON PTFE Brake and Clutch Hose / Line, Design For Drift / Hydraulic Hand Brake application.
  • AN Male Flare Tee Tube Fitting with Locating Lug Mount Hole.
  • Male -3AN flare all sides Tee cross 3 ways pipe with lug tab locator SL fitting connector.
Check Stock

MyLifeUNIT 3 Way Duct Connector Duct Splitter for Exhaust Fan Dryer Vent Hose 4 Inch Dia Y Shape

  • The duct connector is a three-hole connector with two branches. With the dryer vent hose it can be connected to exhaust fans, dryer vent covers and....
  • Made of premium ABS plastic, it is a material with high strength, good toughness and easy processing, no heavy metals. It can be used outdoors and....
  • The interior of the duct splitter is smooth, and its reasonable curvature greatly reduces the wind resistance. At the same time, it can discharge air....
  • The dryer duct connector is seamlessly connected to achieve a good leakproof effect. Don't worry about leaking air after installation. It is small in....
  • Measures it has a diameter of 95 mm (3.7 inch) per interface, suitable for hoses of 100 mm (4 Inch). Wipe the tee when using it, then dock it with the....
Check Stock

NCElec 15M Drip Irrigation Kit,Adjustable Misting Cooling System for Automatic Garden Plant Greenhouse

  • 【Packing】1pc * 1/4” PE tubing( 15M ).
  • 1pc * 1/2″& 3/4″ threaded faucet connector.
  • 【Adjustable Drip Irrigation Emitters】Each misting nozzle can be adjusted, allowing to set each plant to receive its customized watering according to its precise needs..
  • 【Easy to Install】Heat the PE hose first (using hairdryer or hot water) and then install the nozzles for easy assemble ,without digging or plumbing skills.
  • 【Complete Drip Irrigation System】This drip irrigation kit contains all the parts to start a system from a faucet or a garden hose and can be expanded to cover up to 20-25 square meters of irrigation area.
  • 【Save Water and Money】The misting system can save up to 70% in water savings. Great for agriculture, lawn, garden, patio, greenhouse, swimming pool misting fog cooling irrigation..
Check Stock

HEMYLU Misting Cooling System, 50FT (15M) Misting Line + 16 Brass Mist Nozzles + Quick Installation Kit Misting System for Outdoor Patio Garden Greenhouse

  • 【Perfect DIY Misting Cooling System】The misting system is dedicated for US outdoor applications, using for patio fan, garden, greenhouse, waterpark, pool, leisure areas. The mist kit includes 50FT (15M) UV-Resistant 1/4'' tubing, 16 sets of Brass Mist Nozzles, 1pc Tube Cutter, 1pc 3/4" Quick Faucet Connector and 1 set quick installation kit. DIY your own misting cooling system simply..
  • 【Outstanding Performance】We adopted exclusive brass misting nozzles with advanced forging effects, which form a softly and fine misting spray better than other type nozzles (better than plastic, metal, stainless steel nozzles). Also, we adopted A-Class Grade misting line, which has an excellent UV-Resistant, longer lifetime, bigger water flow and flexible performances..
  • 【Useful Installation Kit】Ready-to-Use kit design, you don’t require any other accessories and tools to install your patio mister system, 1 x 3/4" Quick Connect Water Tap Connector with Rubber Washer, which is good sealing & no leaking.
  • 1 x Tube Cutter helps you to cut the length of mist line you need quickly and safely.
  • 20pcs Saddle Clamp and 20pcs Cable Tie are used for affixing misting line and nozzles efficiently..
  • 【For Multiple Purposes】A Tee-Joint connector is available to form a cir....
Check Stock

NooElec SAWbird+ GOES - Premium Saw Filter & Cascaded Ultra-Low Noise LNA Module for NOAA GOES/LRIT/HRIT/HRPT Applications 1688MHz Center Frequency

  • SAWbird+ GOES is a self-contained LNA module designed for capturing beautiful weather images available from NOAA GOES satellites.
  • The module uses 2 ultra-low-noise LNAs and a custom high-performance SAW filter centered at the frequency of interest.
  • The amplifier can be powered in 3 ways: via bias tee, through the on-board microUSB connector, or through DC barrel connector with the included USB to....
  • Though compatible with most SDRs, we recommend use in conjunction with NESDR SMArTee XTR v2 (available on Amazon, item ID B06Y1GN5RP).
  • Includes free male SMA to male SMA adapter and USB to DC barrel connector adapter. Full 2 year warranty and support direct through Nooelec!.
Check Stock

Male Branch Tee Push to Connect Air Line Fittings 1/4 Plastic Plug Tube OD x 1/8 NPT Thread Quick Release Connectors 3 Way Union Fitting Pack of 10

  • Male Branch Tee Push to Connect Air Line Fittings 1/4" Tube OD x 1/8" NPT Thread Quick Release Connectors 3 Way Union Fitting.
  • Type: Male Branch Tee 1/4" Tube Od x 1/8" NPT Thread Push to Connect Pneumatic Air Tube Fittings..
  • High Quality Material: The connector made of high quality plastic and stainless steel.
  • corrosion resistance, ductility, hundreds of tests, durable, no air leakage..
  • Push-To-Connect Fittings: Maximum Pressure 0~145Psi.
  • Components: Male branch tee fitting is used to branch line from female thread in both 90°directions. 360°rotation, after installation, the tube direction can be changed easily. Easy to insert or pull the trachea by hand without the aid of a tool..
Check Stock

Feelers 1/2" Garden Soaker Hose 15 Ft with Soaker Hose Fittings, Round Rubber Garden Drip Hose 70% Saving Hose for Garden Beds,Lawn and Plants

  • ...aterial, which optimizes the pressure resistance of the hose and makes it difficult for the hose to burst. Its operating pressures range from 30psi to 60psi, with an inside diameter of 1/2"(12mm) and an outside diameter of 5/8"(16mm). Water can slowly seep out of the hose to provide the plants with proper moisture..
  • Connector: The soaker hose comes with a 3/4" NPT threaded connector. The gasket inside the connector adds many small holes to reduce the water pressure and prevent the connector from leaking water. In addition, the clamp we are equipped with can be used to replace the brass ring and prolong the service life of the hose..
  • Water saving: The hose is arranged along the direction of the plant, and the water slowly exudes from the pipe wall, extending the time that the water stays at the root of the plant. This reduces over irrigation and saves up to 70% of water..
  • Versatile usage: The soaker hose connector can be connected to other hoses, and it can be above ground or buried underground. Suitable for lawn, garden, flower bed and other places, especially for fine irrigation of rows of plants..
  • Package included: 1/2" x 15ft(4.5m) soaker hose, clamps x2, 3/4" male x1, 3/4" female x1,coupling x2, elbow x2, Tee x2, gasket x2, plug x2..
Check Stock

RTL-SDR Blog R820T2 RTL2832U 1PPM TCXO SMA Software Defined Radio (Dongle Only)

  • Includes 1x RTL-SDR Blog brand R820T2 RTL2832U 1PPM TCXO HF Bias Tee SMA Dongle (V3) (Dongle Only).
  • Several improvements over other brands including use of the R820T2 tuner, improved component tolerances, a 1 PPM temperature compensated oscillator (TCXO), SMA F connector, aluminium shielded case with thermal pad for passive cooling, activatable bias tee circuit and a much improved antenna set..
  • Can tune from 500 kHz to 1.7 GHz and has up to 3.2 MHz of instantaneous bandwidth (2.4 MHz stable). (HF reception below 24 MHz in direct sampling mode with reduced performance). Please note RTL-SDR dongles are RX only..
Check Stock

Vent Systems 4 Inch Duct Connector 3 Way Hose Adapter/Splitter for Hose T-Shape Round Pipe Connector- Extractor Fan - Duct Hose Dryer Vent T Connector - 4 Inch 3 Way Fitting

  • The duct connector is a three-hole - 3 way connector with two branches. With the dryer vent hose it can be connected to exhaust fans, dryer vent....
  • Made out of high quallity Metal it is a material with high strength, good toughness..
  • The interior of the duct splitter is smooth, and its reasonable curvature greatly reduces the wind resistance. At the same time, it can discharge air....
  • The dryer duct connector is seamlessly connected to achieve a good leakproof effect. Don't worry about leaking air after installation. It is small in....
  • It is suitable for hoses of 100 mm (4 Inch). Wipe the tee when using it, then dock it with the hose and fix it with aluminum foil tape. Finally,....
Check Stock

Vent Systems 4 Inch Duct Connector 3 Way Hose Adapter/Splitter for Hose T-Shape Round Pipe Connector- Extractor Fan - Duct Hose Dryer Vent T Connector - 4 Inch 3 Way Fitting

  • The duct connector is a three-hole - 3 way connector with two branches. With the dryer vent hose it can be connected to exhaust fans, dryer vent....
  • Made out of high quallity Metal it is a material with high strength, good toughness..
  • The interior of the duct splitter is smooth, and its reasonable curvature greatly reduces the wind resistance. At the same time, it can discharge air....
  • The dryer duct connector is seamlessly connected to achieve a good leakproof effect. Don't worry about leaking air after installation. It is small in....
  • It is suitable for hoses of 100 mm (4 Inch). Wipe the tee when using it, then dock it with the hose and fix it with aluminum foil tape. Finally,....
Check Stock

Vent Systems 4 Inch Duct Connector 3 Way Hose Adapter/Splitter for Hose T-Shape Round Pipe Connector- Extractor Fan - Duct Hose Dryer Vent T Connector - 4 Inch 3 Way Fitting

  • The duct connector is a three-hole - 3 way connector with two branches. With the dryer vent hose it can be connected to exhaust fans, dryer vent....
  • Made of high quality Galvanised steel, it is a material with high strength, good toughness and easy processing..
  • The interior of the duct splitter is smooth, and its reasonable curvature greatly reduces the wind resistance. At the same time, it can discharge air....
  • The dryer duct connector is seamlessly connected to achieve a good leakproof effect. Don't worry about leaking air after installation. It is small in....
  • It is suitable for hoses of 100 mm (4 Inch). Wipe the tee when using it, then dock it with the hose and fix it with aluminum foil tape. Finally,....
Check Stock