Top Textile Machinery Belts

Bettomshin 1Pcs B1816 Needle Roller Bearings 1-1/8\x1-3/8\x1\ Bearing Steel P0 Stamped Outer Ring Needle Bearings Cageless

  • Size: 1-1/8"x1-3/8"x1"(Bore Diameter x Outside Diameter x Thickness).
  • The needle roller bearing has a compact radial structure and a small outer diameter, which is especially suitable for supporting structures with restricted radial installation dimensions.
  • The rollers for heat tolerance and durability under heavy loads.
  • cage guides and evenly spaced rollers for reduced friction, vibration, and noise.
  • Needle roller bearings are widely used in power tools, textile machinery, agricultural machinery, industrial sewing machines, and engineering machinery.
Check Stock

2PC Steel 2 Mould 20T 14mm Hole Dia Bevel Gear for Mechanical Accessory

  • Bevel gears are a must-have accessory in your industrial supplies. Different gears and the number of turns have different load-bearing effects. Please check your needs carefully before purchasing..
  • Widely use in conveying, agricultural equipment, textile machinery, printing machinery, automotive applications, etc..
  • Made of 45# steel with high wear-resistance, strong and durable.this product is tough and wear-resistant for long hours of operation, making it an excellent industrial replacement accessory..
Check Stock

CNBTR 2PCS 45# Steel 2 Modulus 20 Teeth 14mm Hole Dia 90 Degrees Tapered Bevel Gear Wheel

  • Made of high quality 45# steel ,high wear-resistance,longtime use..
  • Lower contact ratio between gears, higher load capacity..
  • It only can fit for 2module gear,20 teeth,90 degrees,Hole Dia 14mm..
  • Suitable for used in agricultural equipment, textile machinery, printing machinery, Mechanical transmission, etc..
  • Note:1 to 1 bevel gear (only 1 to 1 match, can not match with other modules and other number of teeth).
Check Stock

CNBTR Tapered Bevel Pinion Gear 12mm Hole Diameter 45# Steel 1.5 Module 16 Teeth Pack of 2

  • Made of 45# steel with high wear-resistance,strong and durable..
  • Lower contact ratio between gears, higher load capacity..
  • It only can fit for 1.5 module gear,16 teeth,90 degrees,12mm Hole Diameter..
  • Suitable for used in agricultural equipment, textile machinery, printing machinery, Mechanical transmission, etc..
  • Note:1 to 1 bevel gear (only 1 to 1 match, can not match with other modules and other number of teeth).
Check Stock

CNBTR 45# Steel 1.5 Module 12 Teeth 8mm Hole Dia Tapered Bevel Gear Wheel for Mechanical Accessories Pack of 2

  • Tapered Bevel Gear Wheel, 1.5 Modulus, 12 teeth, 8mm hole diameter..
  • Made of 45# steel with high wear-resistance, strong and durable..
  • Widely use in conveying, agricultural equipment, textile machinery, printing machinery, automotive applications, etc..
  • Description: 1:1 bevel gear wheel can only used with 1:1 gear wheel, and can not match the other modulus of teeth..
  • Scope of application: for all kinds of mechanical transmission occasions..
Check Stock

EPLZON A3144 Hall Effect Sensor 3Pins Magnetic Detector for Arduino (Pack of 20 pcs)

  • Output reverse breakdown voltage: Vce 50V..
  • ✅Operating temperature range: -40℃ to 125℃.
  • Storage temperature range: -55～150℃..
  • ✅Good performance: small size, high sensitivity, fast response, good temperature performance, high precision and high reliability..
  • ✅Application areas: Non-contact switch, automatic ignition, brake circuit, position, speed detection and control, safety alarm device, textile control system,Brushless DC motors, encoders, sewing equipment, textile machinery, household appliances,safety alarm devices and other automation control fields..
Check Stock

ASI ASI328002 24Vdc Pluggable SPDT Relay with DIN Rail Mount Screw Clamp Terminal Block Base, 6 amp, 250 VAC Rating, 24 VDC Coil

  • ... spark, no noise, no electromagnetic interference, long service life, no electric shock, strong anti-interference, strong compatibility..
  • A WIDE RANGE OF APPLICATION: Widely used in Industrial automation, electric furnace heating, stage lighting control, photocopiers, medical equipment, petrochemical equipment, food machinery, packaging machinery, textile machinery, CNC machine tools, plastic machinery, fitness equipment, entertainment facilities and other automation control areas.and so on. etc..
Check Stock

Phoenix goods V Belt Adjustable Link V-Belt - 1/2-inches x 5-feet A/4L Type A Link Belt

  • Adjustable v belt 1/2-inches x 5-feet, Adjustable length, Material: Polyester/Polyurethane Composite, The long-lasting upgrade to rubber belts in any power transmission applications..
  • Perfect for lathes, drill press, table saws, bandsaws and other woodworking machinery, Commercial Marine, Bowling Centers, HVAC, Greenhouses, Poultry House Ventilation, Roller Drive Conveyors, Agricultural Equipment, snow blower, Air Handlers, sewing machine.
  • Longer belt life – extremely high strength and low elongation under load results in increased belt longevity and durability.
  • Fast, easy installation – belts are made to the required length by hand and roll on to the drive without dismantling drive system components.
  • Reduce vibration - Smooth running with less vibration than solid belts. Reduce inventory – eliminate the need to purchase and inventory numerous belt lengths.
Check Stock

6 x 48 Inch Aluminum Oxide Sanding Belt, 15PCs Sanding Belt Set, 3 of Each 80/120/150/240/400 Assorted Grit, Abrasive Belts for Belt Sanders

  • PREMIUM GRADE GRAIN & BACKING – Consists of high-quality cloth backing and premium grade aluminum oxide grain, MICHENG sanding belt is built for higher performance and longer service life..
  • 3 PCS EVERY ASSORTED GRIT – The package contains 15 abrasive sanding belts, 3 pcs of each of the 5 assorted grits, which are 80, 120, 150, 240 and 400 grits. All sanding belts are 48 inch in length and 6 inch in width, suitable for most home and industrial belt sanders..
  • REINFORCED JOINT – Our sanding belts for belt sanders are of strongly reinforced joints that are flat and even, allowing high-efficient sanding and polishing while ensuring longer service life at the same time..
  • ELECTROSTATIC SAND PLANTING – MICHENG sanding belts for woodworking are processed with advanced electrostatic sand planting technology, which prolongs the lifespan of the sanding belts by reducing the falling of the grain..
  • 100% SATISFACTION GUARANTEED – Widely used in metallurgy, machinery, light industry, leather, metal, woodwork and various kinds of grinding and polishing. Supports all kinds of grinding belt machines, sanders, polishing machines, etc. If you have any question about the product, please don’t hesitate to turn to us, we are always ready to help you!.
Check Stock

Knife Sharpening Angle Guide fits 1X30 Belt Sander with Assorted 5 Pack of 1X30 Sharpening Sanding Belts

  • Knife Sharpening Angle guide fits most common 1x30 Belt Sanders. Like the Harbor Freight Central Machinery. Along with your Knife Sharpening Jig you....
  • The Knife Sharpening Angle guide fits securely onto the 1" Platen of your belt sander with a Spring Clip. This allows incredibly easy installation and....
  • Knife Angle References are marked from 10 Degrees to 45 Degrees. You can sharpen a wide variety of tools and blades while maintaining an accurate....
  • The design of the Knife sharpening angle guide allows you to change belts on your 1x30 Sander without removing the guide. Allowing you to maintain an....
  • The Assorted starter Pack of 1x30 Sanding Sharpening Belts includes 5 belts in total. Each one is a different grit. Included with the Angle guide is....
Check Stock

Bevel Gear 1.5 Modulu 15/30 Teeth, Tapered Bevel Pinion Gear Hole Diameter 90 Degrees Tapered Bevel Motor Driving Metal Gear

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5-18mm shaft hole, the key specs for this gear- 1:1 ratio, 2 Module, 20 teeth, 12mm shaft hole, M5 fixing hole with 4mm Keyway, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set （2 or more gears) should be replaced together for smoothly drive..
Check Stock

Szliyands 220V 20mA Energy Saving LED Indicator Light Mounting Hole Size 22mm (7/8 Inch) Red Green Yellow 6 Pcs

  • Rated voltage: AC / DC 220V, Model: AD16-22D / S, Indicator color: Red, Yellow, Green..
  • 6Pcs environmental protection lamp: long life and reliable LED indicator, energy saving, low maintenance cost..
  • Easy to install: The screw clamp is easy to connect and has strong electrical conductivity. You only need to drill a 22mm (7/8 inch) hole and then use screws to fix it..
  • Practical and Convenient: These panel-mounted indicators ensure you a visual status indication of any index signal, expected signal, emergency signal, and other index signals..
  • Widely used: It can be used in power equipment, textile machinery, printers, ships and mining machinery..
Check Stock