Top Thread Cutting Screws

Stainless Steel Lath Screws 8 x 1-1/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 1-1/4 1.25 in.

  • ...od. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a truss with an extra flange around the outside of it to increase bearin....
Check Stock

HORUSDY 40-Piece SAE Tap and Die Set, Inch Sizes for Coarse and Fine Threads Tool with Storage Case

  • Industrial grade GCr15 bearing steel construction ensures durability and tool longevity to withstand professional uses. Suitable for cutting steel, copper, aluminum, cast iron and other materials..
  • Suitable for re-threading of fasteners and fastener holes, cutting or updating of internal and external threads. Precision milling of SAE taps and molds are used for cutting raw materials or repairing existing threads, removing screws, etc..
  • All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance..
  • Set includes (20) SAE Fractional taps and dies for coarse thread (UNC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12- 24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
  • (12) SAE Fractional taps and dies for fine thread (UNF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.
  • Heavy-duty plastic suitcase, easy to transport, safe storage, quick to organize, prevent accessories from falling off..
Check Stock

T.K.Excellent Wood Screw Phillips Flat Head Drywall Chipboard Screw Assortment Kit,1600 Pcs

  • Assorted 1150 Piece Yellow Zinc Pozi Countersunk Wood Screws Kit..
  • Chipboard screws which have deep and sharp thread for cutting through wood easily and cleanly. The exceptional reliability and strength of the T.K. Excellent enables the user to rely on one product for a variety of applications..
  • Ｍade of carbon steel, countersunk flat head, yellow zinc passivated for corrosion resistance. 5*80,6*100 are Smooth shank..
  • Designed for composite timbers such as hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power. Full thread be used when fixing metal to wood..
  • The set comes in storage case for easy portability so you'll always have the right screw for the job..
Check Stock

480Pcs M3 M4 Self Tapping Wood Screws Assortment Kit Philips Flat Head Small Wood Screws Fasteners Contain 30Pcs Screws Anchors Use as Cabinet Screws Drywall Screws,ect 8 Sizes Carbon Steel

  • 【HIGH QUALITY MATERIAL】:The self-tapping wood screws made of quality Carbon Steel, resistant to rust,good corrosion resistance in bad environment, which have a sharp point that helps penetrate the material..
  • 【QUALITY & WORKMANSHIP】:Adopting high-precise cutting technology, the screws thread is very precise, clean, sharp, the deep and clear thread can easily penetrate the wood and plastic and ensure a secure hold,is not easy to deform and slid while using..
  • 【WIDE APPLICATION】:Self tapping small wood screws are mainly used in metal, plastic or board articles,such as gypsum boards, wooden board, ceiling, partitions,etc.Widely used in electrical products,communication equipment, ship assembly,machinery, furniture,other maintenance work,DIY arts and craft..
  • 【PACKAGE INCLUDES】:This screws assortment kit including 8 kinds Phillips countersunk flat head self-tapping screws. Contains M3 x 6mm, 8mm, 10mm, 12mm, 16mm, and M4 x 20mm, 25mm, 30mm wood screws and M6 screw anchors, meet all your demands..
  • 【STORAGE BOX】: There are 480Pcs different types of wood screws, and all of screws will be packed in a sturdy assortment case, can be used for a storage box, is organized for you..
Check Stock

M3 Flat Head Wood Screws Assortment Fasteners Kit 420pcs,Phillips Drive Countersunk Head Self-Tapping Screws,304 Stainless Steel,Contains 20pcs M6 Screw Anchors

  • 【HIGH QUALITY MATERIAL】:Made of 304 stainless steel, resistant to rust,good corrosion resistance in bad environment,commonly have a sharp point that helps penetrate the material..
  • 【MATERIAL & WORKMANSHIP】:Adopting high-precise cutting technology, the screw thread is very precise, clean, sharp, the deep and clear thread can easily penetrate the wood and plastic and ensure a secure hold,is not easy to deform and slid while using..
  • 【PACKAGE INCLUDES】:8 Kinds Phillips Flat Head Self-Tapping Screws. Contains M3 x 6mm/8mm/10mm/12mm/16mm/20mm/25mm/30mm flat head screws and M6 screw anchors, meet all your demands..
  • 【STORAGE BOX】: There are 420 pcs different types of screws. All of screws will be packed in a sturdy convenient case, can be used for a storage box, is organized to you..
  • 【WIDE APPLICATION】:Self tapping screws are mainly used in metal, wood, or plastic.Widely used in professionals, amateurs, home and office appliances, workplace fasteners,electrical products,communication equipment, ship assembly,machinery, furniture,other maintenance work,DIY arts and craft..
Check Stock

ORGRIMMAR Wood Screw Phillips Flat Head Yellow Zinc Plated Chipboard Screw Wood Interior Construction Metal Screw Assortment Kit,230Pcs

  • Chipboard screws which have deep and sharp thread for cutting through wood easily and cleanly. The exceptional reliability and strength of the T.K. Excellent enables the user to rely on one product for a variety of applications..
  • Ｍade of carbon steel, countersunk flat head, yellow zinc passivated for corrosion resistance..
  • Designed for composite timbers such as hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power. Full thread be used when fixing metal to wood..
  • As the name suggests, these screws can be used when doing general DIY work with chipboard and other softer types of woods.Require pilot holes in hard wood, drilled 2mm smaller than the size of screw used..
  • The set comes in storage case for easy portability so you'll always have the right screw for the job.Assorted 230 Piece Yellow Zinc Pozi Countersunk Wood Screws.
Check Stock

Center Gage Thread Gauge Whitworth 55 & 60 Degree Inch Metric Screw Thread Pitch Gauge 3pcs

  • 【Material】The screw gauge tool set is made of stainless steel and processed with chrome finish, it combines high strength with good resilience and elegant appearance.
  • It won't get rusted easily and owns long-lasting durability.
  • 【Package content】The screw gauge tool set contains 3 x screw pitch gauge and 3 x center gauge.
  • 【Thread pitch gauge function】Can be applied to measure the pitch of the thread.
  • 【Center gauge function】Apply to grind and position thread cutting tool on a lathe.
  • 【Advantage】Accurately measures internal and external screw threads with thread blades of varied size, they worked well to measure both screws and figure out what type of replacements.
Check Stock

M3 Flat Head Wood Screws Assortment Fasteners Kit 420pcs,Phillips Drive Countersunk Head Self-Tapping Screws,Yellow Zinc Plated Finish,Contains 20pcs M6 Screw Anchors

  • 【HIGH QUALITY MATERIAL】:Made of Carbon Steel,resistant to rust,good corrosion resistance in bad environment,commonly have a sharp point that helps penetrate the material..
  • 【MATERIAL & WORKMANSHIP】:Adopting high-precise cutting technology, the screw thread is very precise, clean, sharp, the deep and clear thread can easily penetrate the wood and plastic and ensure a secure hold,is not easy to deform and slid while using..
  • 【PACKAGE INCLUDES】:8 Kinds Phillips Flat Head Self-Tapping Screws. Contains M3 x 6mm/8mm/10mm/12mm/16mm/20mm/25mm/30mm wood screws and M6 screw anchors, meet all your demands..
  • 【STORAGE BOX】: There are 420 pcs different types of screws. All of screws will be packed in a sturdy convenient case, can be used for a storage box, is organized to you..
  • 【WIDE APPLICATION】:Self tapping wood screws are mainly used in metal, plastic or board articles,such as gypsum boards, wooden board, ceiling, partitions,etc.Widely used in electrical products,communication equipment, ship assembly,machinery, furniture,other maintenance work,DIY arts and craft..
Check Stock

HORUSDY 60-Piece Master Tap and Die Set | SAE Inch and Metric Sizes | for Coarse and Fine Threads Tools

  • Made of high-quality hardened alloy steel, durable and superior strength. Suitable for cutting steel, copper, aluminum, cast iron and other materials..
  • Suitable for re-threading of fasteners and fastener holes, cutting or updating of internal and external threads. Precision milling of SAE and metric taps and molds are used for cutting raw materials or repairing existing threads, removing screws, etc..
  • All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance..
  • Set includes (20) Metric taps and dies: M3x0.5, M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.25, M9x1.25, M10x1.0, M10x1.5, M12x1.75.
  • (20) SAE Fractional taps and dies for coarse thread (UNC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12- 24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
  • (12) SAE Fractional taps and dies for fine thread (UNF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.
  • Heavy-duty plastic suitcase, easy to transport, safe storage, quick to organize, prevent accessories from falling off..
Check Stock

Spax M Countersunk Head with Milling Ribs, Partially Threaded T-Star Plus with Cut Point, 4 x 40 MM, Galvanised, 200 Stück

  • Use: For screwing MDF materials and other thin-walled panels made of wood-based materials indoors. Spax-exclusive Wirox surface.
  • Countersunk head with milling ribs pulls particularly easily into the material and can be recessed flush Optimum power transmission and clean fit with Spax bit T-Star plus T20 with guide pins.
  • and longer battery life: no pre-drilling (depending on the wood). Precise positioning and reduction of the splicing effect thanks to the drilling function of the CUT tip. Easier cutting of the wood fibre thanks to Spax-typical wave profile.
  • Made in Germany: TUV certified. Certified for use in the technical approval for screws as a wood connecting medium in carrying wood constructions (ETA-12/0114).
  • Box contents: 1 Spax-M box, 200 pieces MDF screws, T-Star plus countersunk head, 75° milling head, partial thread, CUT tip, Wirox surface, thread diameter (Ød1) = 4 mm x total length (Ls) = 40 mm, partial thread length (LgT) = 28 mm, head diameter (Ødk): 7 mm, bit not included.
Check Stock

Milwaukee 48-22-4106 6 in 1 Diagonal Pliers, 6-Inch

  • It also has easy to read wire gauge marking on both sides of the tool for stripping in either directions.
  • The handle is color coded, red meaning stranded wire.
  • Reaming Head Design-Smooth Edges of Metal Pipe From 1/2-Inch to 1-Inch (Patent Pending).
  • Bolt Cutter-Thread and cut #6 and #8 bolts to preferred length (Patent Pending).
  • High Leverage Design - For cutting power and performance.
  • Laser Hardened Cutting Edges - Cuts wire.
  • Offset Head Design - 15 Degree offset head for easier and quicker prying and pulling (Patent Pending).
Check Stock

6 Pieces Stainless Steel Screw Thread Pitch Cutting Gauge Tool Set, 3 Pieces Center Gage, 1 America Type, 1 Metric America Type, 1 Metric Imperial US for Industrial Measurement

  • Material: the screw gauge tool set is made of stainless steel and processed with chrome finish, it combines high strength with good resilience and elegant appearance.
  • It won't get rusted easily and owns long lasting durability.
  • Package content: the screw gauge tool set contains 3 x screw pitch gauge and 3 x center gauge.
  • Thread pitch gauge function: can be applied to measure the pitch of the thread.
  • Center gauge function: apply to grind and position thread cutting tool on a lathe.
  • Advantage: accurately measures internal and external screw threads with thread blades of varied size, they worked well to measure both screws and figure out what type of replacements.
Check Stock