Top Thread Spindle

MTD 712-0417A Hex Flange Nut 5/8-18- 3 Pack

  • Known as Hex Flange Nuts, Flange Lock Nuts, Spindle Nuts, Blade Lock Nuts, this nuts are used to secure a blade to the spindle.
  • Work with MTD, Craftsman, Troy Bilt lawn mowers & tractors. Had been tested and confirmed to work with LT1040 LT1042 LT1046 LTX1040 mower deck spindles.
  • Replace the part# 712-0417, 712-0417A, 912-0417, 912-0417A, 753-05549, 112-0330.
Check Stock

Fowler 52-253-004-1, Premium Outside Inch Micrometer With 3-4\ Measuring Range

  • Micrometer Screw Gauge: With flat anvil/spindle pair for general purpose measuring.
  • microfine graduations and carbide-tipped measuring faces.
  • 0.001" graduation and ± 0.001" accuracy for precise readings.
  • Accurate Measurements: Anvil and spindle hardened and precision-ground with microlap finish on tips.
  • 0.256" diameter of measuring faces, 0.00003" flatness, and 0.00008" parallelism on 3-4" micrometers for accurate measurements.
  • Easy to Use: Quick, easy zero adjustment on the sleeve and positive lever locking clamp.
  • friction thimble with ratchet stop applies constant force for repeatability between users.
  • Satin Chrome Finish: Vernier scale with hammertone blue baked-enamel frame with heat-insulated frames.
  • the finishing on the thimble and sleeve helps reduce rust and glare, while the lapped spindle thread provides smooth movement, extending product life.
  • Set Includes: An outside micrometer with a vernier scale of 0.001.
Check Stock

Axle Spindle Rethreading Tool Set Repair/Cleaning Threading Tools High-Strength Tools Set Easy To Store Thread Restorer Use With 1-1/4\ Socket Mechanic Tool Set For M20,22,24 13/16 3/4 x 20 UNEF 8pc

  • 【Used For Axle Threads Repair/Cleaning/Rethreading Tool Set】Axle spindle rethreading tool set can be used to repair/clean the axle threads on the spindle, effectively clean the rust and dirt on the thread, repair the worn thread,and recover the clear thread line. It is the best tool for cleaning axle threads..
  • 【Suitable For a Variety Of Thread Specifications & Wide Range Of Applications】Threading tools are suitable for a variety of thread specifications, including axle threads on the spindles of eight common mold sizes:M24 x 1.50, M24 x 2.00, M22 x 1.00, M22 x 1.5, M20 x 1.25, M20 x 1.50, 13/16" x 20UNEF, 3/4" x 20UNEF, and widely applicable, suitable for most vehicles..
  • 【Can Be Used With 1-1/4" Socket Or Wrench & High-Strength/Durable High-Quality Steel Material】Thread restorer mechanic tool sets can be used with 1-1/4" socket or wrench to help better repair/clean shaft threads ,save time and energy. Made of high-quality steel, with high strength and durability, it can provide long-term service and reduce the cost of frequent tool replacement.(package does not contain 1-1/4" socket or wrench. ).
  • 【Easy To Carry/Store】Thread restorer kit is packed in a high-quality plastic box, you can easily take it anywhere, and it is easy to store....
Check Stock

Fowler 52-229-214-0 Economy Outside Micrometer Set with 0–4 Range (Set of 4)

  • Micrometer Set: With flat anvil/spindle for general purpose measuring.
  • microfine graduations and carbide-tipped measuring faces.
  • High Accuracy Micrometer Set: Anvils and spindles are hardened and precision ground with microlap finish on tips.
  • 0.256" diameter, 0.00003" flatness, and 0.00005" parallelism on 0 to 1" micrometer for accurate measurements.
  • Easy to Use: Quick, easy zero adjustment on the sleeve and positive locking nut on spindle.
  • Ratchet stop thimble applies constant measuring force for repeatability between users.
  • Satin Chrome Finish: On the thimble and sleeve to help reduce rust and glare, lapped spindle thread that provides smooth movement and extends product life.
  • Set Includes: Outside micrometers of 0 to 1 inch, 1 to 2 inches, 2 to 3 inches and 3 to 4 inches.
  • 1 inch, 2 inches, and 3 inches standard, a wrench, and a fitted case.
Check Stock

New Lathe ER32 Woodworking Dowel Collet Chuck System 1/4 3/8 1/2 5/8 3/4 USA

  • For 3/4″ x 16 Spindle Adapter & 5pcs ER32 collet.
  • 5 Collets: 1/4-Inch, 3/8-Inch, 1/2-Inch, 5/8-Inch and 3/4-Inch.
  • Excellent gripping for small diameter dowels and tenons.
  • Perfectly designed to hold a pen mandrel, and other small wood projects where a tenon is used.
  • 1-Inch by 8TPI thread with 3/4-Inch by 16TPI spindle adapter, with collet closing head.
Check Stock

INTBUYING Inch and Metric Metal Lathe Benchtop Lathe Machine 8"X32" High Precision Mini Table Lathe 1100W Variable Speed 2500rpm MT5 Spindle Taper 110V

  • ...ining accuracy and efficiency greatly..
  • ⚙【Great Performance】RC-210E Mini Lathe is mainly used for processing the end face of various rotary surfaces and rotating bodies by Brushless Power 900W/110V,The length of center is 31.50"(800mm),Swing Over Bed is 8.27"(210mm),Rotary diameter of tool rest is 5.51"(140mm),Spindle bore is 1.50"(38mm),Diameter of chuck is 4.92"(125mm),Width of lathe bed is 3.94"(100mm),Thread standard:Metric/imperial/customized.❥This lathe is capable of adjusting set screws for accurate operation..
  • ⚙【High Precision Operation】High Precision three-jaw chucks with 125mm clamping diameter are used to clamp square and round materials firmly, we also offer optional four-jaw chucks.In the X axis direction can be automatic feed,Automatic feed speed can be adjusted,Automatic feed range reached 0.01mm-0.4mm.❥The tailstock is movable and fixed with a maximum center distance of 31.5 inch at the far right.With the MT2 taper in tailstock spindle..
  • ⚙【Variable Speed】The spindle rotation speed is divided into two adjustable gears, respectively 50-1250rpm and 1250 -2500rpm.The panel can observe the rotation speed in real time, which is flexible and convenient..
  • ⚙【Easy to operate】The Mini Lathe can switch between metric and i....
Check Stock

PSI Woodworking KWL-1018VS Turncrafter Commander 10" Variable Speed Midi Lathe

  • KWL-1018VS replaces TCLC10VS. ETL Listed and certified by Intertek.
  • Powered by 3/4 hp Variable Speed high performance motor(110V) & an SBC microprocessor. Two belt positions: 500-2000 RPM & 1500-3600 RPM.
  • Headstock Thread 1" x 8tpi. Headstock/Tailstock Taper #2MT. Distance between Centers 18". Swing over Bed 10". Cast iron base.
  • Tailstock & Spindle Bore 3/8". Quill Travel 1-5/8". (24) indexing positions with spindle locking. Convenient built-in handles.
  • See Description below for all of the included parts.
Check Stock

PSI Woodworking KWL-1218VS Turn Crafter Commander 12\ Variable Speed Midi Lathe

  • KWL-1218VS replaces TCLC12VS. ETL Listed and certified by Intertek..
  • Powered by 1hp Variable Speed high performance induction motor(120V-60HZ) & an SBC microprocessor. Two belt positions: 500-1800 RPM & 1950-3800 RPM..
  • Headstock Thread 1" x 8tpi. Headstock/Tailstock Taper #2MT. Distance between Centers 18". Swing over Bed 12". Cast iron base..
  • Tailstock & Spindle Bore 3/8". Quill Travel 1-5/8". (24) indexing positions with spindle locking. Convenient built-in handles..
  • See Description below for all of the included parts..
Check Stock

Bessey HS-6 6-Inch Wood Handscrew Clamp

  • Adjustable jaws for a strong grip or delicate for those small projects.
  • Oiled wooden jaws won't damage or slip on your work piece.
  • Feature a large diameter spindles for added strength and durability. Spindles and swivel nuts are made from Cold Drawn, carbon steel..
  • Acme thread for Rapid operation and years of hard use..
  • Hardwood handles are over-sized for comfort, Extra torque and reinforced with steel ferrules. The spiral pin used to secure the handles to the spindle is easy to remove for repair or replacement..
  • The jaws, made from quality hard Maple for a lifetime of use, are oiled to resist glue..
  • Feature a large diameter spindles for added strength and durability. Spindles and swivel nuts are made from cold drawn, carbon steel..
  • Acme thread for rapid operation and years of hard use..
  • Hardwood handles are over-sized for comfort, extra torque and reinforced with steel ferrules. The spiral pin used to secure the handles to the spindle is easy to remove for repair or replacement..
  • The jaws, made from quality hard maple for a lifetime of use, are oiled to resist glue..
Check Stock

Singer All Purpose Sewing Machine Oil 3.38-Fluid Ounce

  • Cordless, handheld portable mending machine Single thread feed for quick repairs or temporary basting.
  • Includes threads, bobbins, needles and thread spindle.
  • Note : There is a scannable QR Code on the package that can be scanned to view more information and how-to instructions..
Check Stock

NEWSTY Bike Pedals with Clips and Straps for Outdoor Cycling and Indoor Stationary Bike 9/16-Inch Spindle Resin/Alloy Bicycle Pedals Black

  • High Quality Material - resin and alloy Construction: For bike pedals with clips and straps, we use durable engineering resin and alloy which are considered for safe prblems..
  • Excellent Control on Pedaling: Good metal grips on the bottom and nylon type straps on the top will keep your feet positioned just right on the pedals. With Newsty bike pedals, you can have an excellent control while pedaling your bike..
  • Compatible for most bikes with 9/16” Spindle: The bike pedals with clips and straps are not only perfect for outdoor cycling, but also for indoor stationary bikes which can give you confidence to be aggressive while not worrying about losing your feet on pedals..
  • Pre-installed Toe Clips and Straps & Attention Please: The whole installation will just cost you 1 minute for all the clips and straps are pre-installed. Pay attention please, our pedals are 9/16 Chromalloy spindle. Besides, the right pedals are right-hand thread and left pedals,left-hand thread..
Check Stock

TUAIC Spindle Blade Nut for Cub Cadet Zero Turn Mower RZT 50 - RZT 54 - RZT42

  • 3 Pack- Aftermarket Spindle Blade Jackshaft Nuts..
  • Compatible with Cub Cadet, MTD, White, Toro / Wheelhorse or Troy Bilt Garden Tractors..
  • Model Numbers- Cub Cadet Zero-Turn Models: RZT50, RZT54, & RZT42 MTD: Riders, 600 & 800 Series, & Many Others Troy Bilt: R809K, RZT42, RZT50, T609, T809H, U609H, V809H, X609G, Y609H, Y809P, Z809H, Z809K..
  • Dimensions: - Can be used on Blade or Pulley Side. - Flanged Blade Spindle Nut - 5/8" Thread..
  • Interchangeable with: 712-0417A, 712-0417, 7120417, 912-0417A, 9120417..
Check Stock