Top Thread Turning

52Pcs Stainless Steel Thread Measuring Gage, Precise Screw Thread Measuring Gage Pitch Measuring Tool 60 Degree (Metric& Imperial)

  • [Adjusted Freely]: Thread measuring gage is using rotary switch, which can be freely adjusted. Mini size and compact, the pitch measuring gage won't occupy too much space, carry it around easily with the convenience.
  • [Magnetic Head]: The thread plug gage, through quenching processing, strong hardness, head with a magnetic. Narrow-leaved designed to measure the external and internal threads - even in small holes.
  • [Precise Measurement]: Thread measuring gage comes with precise measurements and simple design, which can be widely used and durable. Measuring range: 0.25 - 6.00mm/0.0098" - 0.23".
  • [Best Checking Angle Tool]: Stainless steel thread measuring gage is useful for checking tool angle while cutting threads in metal turning lathes. Applied to measure thread and external thread tooth pitch, a great measuring tool for your working.
  • [Premium Stainless Steel Material]: Made of premium stainless steel material, this measuring gage is sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
Check Stock

Houseuse 4\ Diameter Round Iron Hand Wheel Handwheel for Milling Machine Lathe

  • Modern-design Hand Wheel, polished rim. Widely used in industrial machine tools, such as milling machine, lathes, grinders etc..
  • Design with revolving handle, hand wheel has threaded hole for easy handle assembly..
  • These Hand Wheels are bored to the shaft diameter for their size, and are also tapped for a Removable Handle..
  • Handwheel is good for any application where general or precise adjustments need to be made a turning mechanism..
  • Handle Size: 62 x 22 / 2.44" x 0.87"(L*Max.D ).
  • Fixing Thread Hole Size: M6 ( Fixing screws are not included here.).
Check Stock

Tecmolog 3-way Tee Connector Stainless Steel T Adapter G 1/2 T Valve Diverter for Bathroom Shower Arm, Bathtub Faucet, SBA020A

  • 3 way G1/2 tee fitting. Size of G1/2 female thread, G1/2 male thread and G1/2″ male thread. Please check the size before purchasing!!.
  • Solidly constructed of stainless steel with nickel finish for long term durability, resisting daily rust and tarnishing.
  • Rubber gaskets included for a better tight seal, fits well with your fixtures without leaking if install properly.
  • Screwing on the movable female thread nut without turning the entire valve around when outlet is close to a wall.
  • Used for adding 2 outlets on a 1/2 angle valve, shower arm or bathtub faucet to connect shower hose, water line and bath sprayer hose.
Check Stock

24 Pack Ceiling Hooks for Hanging Plants 2.9 Inch Plant Hooks Heavy Duty Vinyl Coated Screw in Hooks Kitchen Hooks Cup Hooks for Hanging Plants Lights Cups Mugs Pots Hat Clothes

  • Product Size: This ceiling hook total length is 2.9 inches long with 0.18-inch screw diameter, 2 inches hook length for hook goods and 0.9 inch screw length for firm on the ceiling, wall, tress and other wood material surface. Drilling a smaller hole is recommended before turning thread.
  • Anti-rust Durable: Our cup hooks surface are made of plastic Vinyl coated. The standard thread is electroplated, rust resistant durable..
  • No Bents & Dispositioning: The screw end design makes it very easy to install, sharp eye point bites into wood easily and quickly, you can easily screw the metal cup hook into wood, wall, ceiling..
  • Utility Hooks: Hooks can holds up around 50 pounds weight, it is made of durable steel, And it's coated with vinyl which is soft and smooth, protecting your hands and the item you hanging. The diameter of screw is 0.18 inch, drilling a smaller hole is recommended before turning thread..
  • Make Your Home More Tidy: Perfect for indoor and outsider use. The steel cup hook help to create extra room for home, school, office. This vinyl cup hook set can be use for hanging clothes, hat, mug, towel, plant, pot, light,lantern,lamp, curtain, wind chimes, festival decoration, etc..
Check Stock

Tecmolog 3-way 3/8" and 1/2" 3 Way Adapter Tee Connector Stainless Steel 3/8" Water Line T Fitting Brushed Nickel, SBA020B

  • US 3/8" female thread connects to the angle stop valve, US 3/8" male thread connects to the water supply line and G 1/2" male thread connects to the G1/2" flexible hose.
  • Solidly constructed of stainless steel with nickel finish for long term durability, resisting daily rust and tarnishing.
  • Rubber gaskets included for a better tight seal, fits well with your fixtures without leaking if install properly.
  • Screwing on the movable female thread nut without turning the entire valve around when outlet is close to a wall.
  • Used for adding an outlet on a water shut off valve for a laundry washer, toilet bidet, faucet and many more.
Check Stock

Tecmolog Brass Faucet Diverter Valve with Aerator and M22 to M24 Male Threaded Adapter, Black Faucet Splitter 3 Way Sink Diverter for Faucet, SBA021CB

  • Removable M22 x M24 Male Adapter: This M22 faucet splitter with a M22 to M24 male adapter, if your faucet spout is M24 female thread, you can add it to match the faucet spout.
  • Faucet Splitter Size: Top connector attaches to the faucet nozzle is female 55/64″ (0.86″ or 22mm), side outlet fits standard hand held shower hose that has 1/2-inch pipe thread.
  • Brass Faucet Diverter with Aerator: Brass body with hard brass handle and removable aerator, bright and premium black finish, withstands daily rust, corrosion and tarnish, hard to be blocked up.
  • Convenient Swiveling Nut: The nut end turns separately allowing you to tighten it without turning the entire valve which makes it an easy attachment to your sink.
  • Smoothly Lever Handle: Diverting the water from the sink’s faucet to the attached hose that fits standard 1/2″ inch threads by turning the diverter valve up or down.
Check Stock

KPCB Tech Mini Sewing Machine for Beginners with 42 PCS Sewing Kit, fabrics and Finger Guard

  • ...ut for strong stitching, this electric sewing machine also supports batteries powered with 4 AA batteries..
  • 【Double thread】Designed with double-thread as full size sewing machine, it is able to sew at most 5-layer fabrics without manual knot ending. Please turn the hand wheel to manual catch bottom thread before turning on the power as MANUAL indicated..
  • 【Mini Size】Measured in 8.6*6.9*3.5 inches, this handy mini size is convenient to storage. And it is also an ideal size for kids or beginners to learn sewing..
  • 【Built-in function】It comes with a rewinding pole to refill the bobbins from large spools and a built-in light to enhance the light source when sewing. It is also designed with a thread cutter to help cut thread whenever necessary..
  • 【Accessories】It comes with 42PCS sewing machine kit including bobbins, scissor, measuring tape, thimble, needle threader and needles. We also provide an extension table, foot controller and two pieces of fabric for convenient sewing. Please contact our customer service team if you need any assistance. Welcome to contact us to get different language of manual including Germen/French/Italian/Spanish/English/Japanese..
Check Stock

1 TU58 Thread Measuring Gauge, Vertical Bolt and Nut Gauge / Thread Checker (Inch & Metric)

  • 【Durable Quality】-- Made of quality stainless steel, it combines high strength, good resilience, elegant appearance. Not easy to rust and long lasting durability.
  • 【Wide application】-- Accurately measures internal and external screw threads with thread blades of varied size.
  • Use to provide the correct size drill bit, or to size fastener to determine what bit should to use. Used for checking tool angle while cutting threads in metal turning lathes, accurately measures internal and external screw threads with thread blades of varied size.
  • 【Easy To Use】-- Designed with a hole on each end, from where you press the tooth gauge, you can easily rotate the thread blades.The toothed edges are sharply defined and the numbers are stamped and easy to read.
  • 【Size】-- 51 Pcs America SAE Type Measuring range: 4-84.
  • 58 Pcs Metric & America SAE Type & British Whitworth Metric:0.25-6.0 Imperial:4G-62G US: 8, 10, 11, 14, 19, 28.
  • 【Package Include】-- 2 In 1 set Screw Thread Pitch Gauge Tool, Pitch Cutting Gauge Caliper Gages Measuring Tool.
  • 51Pcs Blade America SAE Type and 58Pcs Blade Metric & America SAE Type & British Whitworth.
Check Stock

Double Bearing Live Revolving Centers For Lathe Machine- Engineering Tools (2MT- M12 X 1)

  • Quality Precision Double Bearing Live Revolving Centers-Made from Quality Tools Steel.
  • Comes in 2MT with M12 x 1 mounting threads to mount the chuck or drill chuck for long work piece support while turning on the lathe.
  • Chose as per your Lathe machine tailstock 's taper . Perfect for both Wood turning & metal working.
  • Shanks are hardened & precisely ground . The mounting thread spigot has been machined to hold through a spanner to hold it from revolving and tightening the chuck on it..
  • Concentric run out within 10 microns. Recommended for Conventional Lathe Machines Only.
Check Stock

MARRTEUM 1/2 Inch Tall Lamp Finial Tapped 1/4-27 Knob Lamp Accessories for Lamp Shade Holder Harp Tops, Black, 2PCS

  • The Finial is designed as a traditional knob, and looks classical,simple and modern..
  • Easy Installation: Just remove the old finial by turning anticlockwisely, then positioning the new lamp finial over the threaded stud and fasten it by turning clockwisely..
  • The Finial is the perfect accessory for Lamp Shade Holder Harp Tops, which is compatible with most different lamps, such as wall lamps, floor lamps,table lamps, pendant lamps and so on..
Check Stock

Glarks 5Pcs Stainless Steel Screw Thread Pitch Cutting Gauge Tool Set, 51Pcs America SAE Type + 52Pcs Metric & America SAE Type & British Whitworth + 3Pcs Center Gage, Packed in Plastic Box

  • Made of quality stainless steel and processed with chrome finish, it combines high strength, good resilience, elegant appearance. Not easy to rust and long lasting durability.
  • The America SAE type thread pitch gauge has 51 pieces tablets.The metric and Inch and SAE type thread pitch gauge has 58 pieces tablets, 24 tablets of which are metric, 28 tablets are Inch and 6 tablets are America SAE.
  • Well Made: The toothed edges are sharply defined and the numbers are stamped and easy to read.
  • Easy to Use: Designed with a hole on each end, from where you press the tooth gauge, you can easily rotate the thread blades.
  • Used for checking tool angle while cutting threads in metal turning lathes, accurately measures internal and external screw threads with thread blades of varied size.
Check Stock

2' Inch Low Profile Trundle Cabinet Casters Wheels with Furniture Screws - Set of 4

  • 1-1/2 inch wide x 7/8 inch diameter hard white PP low profile twin wheels thread directly into heavy appliances for easy mobility (4 Pack).
  • Threaded stem includes mating jam nuts for easy alingment and height adjustment to replace factory wheels or legs on efrigerators, freezers, and other heavy appliances and are not recommended for laundry equipment or on cushioned vinyl floors.
  • Hard twin wheels are separated for easy turning and thread into appliances after removing feet or leveling legs.
  • A great choice when heavy appliances need to be mobile for cleaning or installation and not recommended for laundry equipment or on cushioned vinyl floors.
Check Stock