Top Threaded Anchor Adhesive

DRICORE PRO Concrete Repair Structural Epoxy Injection Resin Kit (30') | Best All in One Set with Injectable Filler for Repairing Cracked Foundations, Walls, Basements, Cement Structures

  • Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry.
  • High-tack paste resists moisture for application in damp environments and can be used in vertical applications.
  • Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F.
  • Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F).
Check Stock

Qty 25 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolts, Wall Anchor Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

CONFAST 5/8\ Lag Shield Anchor Long (25 per Box)

  • READILY ACCEPTS MACHINE BOLTS-Any coarse threaded bolt can be used.
  • INTERNAL THREADS-Bolt can be removed easily.
  • BOLT EXPANDS ANCHOR-No need for setting tools.
  • CAN BE INSTALLED IN CONCRETE, BRICK OR BLOCK-Versatile anchor for most masonry applications.
Check Stock

1SHOT Steel Stud Anchor 250 Pack

  • Thread Dia.: M12, Pitch:1.75mm, Total Length: 250mm / 9.84"..
  • Material: 304 Stainless steel, anti-rust, anti-corrosion, durable to use..
  • Advantage: Designed for assembly fastening, screw into threaded nuts or tapped holes..
  • Application: Suitable for anchor bolts, clamps, hangers and U-bolts and many more projects..
  • Package: Includes 2 pack M12 x 250mm Fully Threaded Rod. Any questions feel free to contact us..
Check Stock

Murtenze 2Pcs M5 x 250mm Fully Threaded Rod, 304 Stainless Steel Long Threaded Screw Right Hand Threads (Silver)

  • Package & Size - You will get 2 pcs 5mm x 250mm threaded rods worth of.
  • Total length: 251 mm/9.84 inches. Fully threaded rods and studs can be drilled, cut, heated and formed.
  • Durable Material - These m5 threaded rods are made of 304 stainless steel, with excellent corrosion resistance and rust resistance, and long service life.
  • How to Use - Our stainless steel threaded rods can be used for assembly and fastening, screwed into nuts or threaded holes, and cut to the length you want.
  • Widely Application - These threaded rods and studs m5 are suitable for various applications, such as anchor bolts, fixtures, hangers, U-bolts, welding protrusions, and even model building, etc..
  • Satisfied Service - 100% Satisfaction If there is any quality problem with our product, we will reply within 24 hours. And you can return the product and get a refund within 30 days from receiving. You have no risk of trying, please order with confidence and no hesitate..
Check Stock

Sleeve Anchor 3/8-Inch by 1-7/8-Inch - Hex Head Sleeve Anchors Concrete Bolts Concrete Sleeve Anchors 100

  • CONCRETE BOLTS SLEEVE ANCHORS Sleeve type anchors feature a split expansion sleeve over a threaded stud bolt body and integral expander, nut and washer.
  • HEAVY DUTY SLEEVE ANCHORS made of plated Carbon Steel.
  • CONCRETE SLEEVE ANCHORS Anchors should be installed with carbide tipped hammer drill bits or any other concrete drilling type bits.
  • CONCRETE SLEEVE ANCHOR Perfect for mounting to concrete or block.
  • SIZE: The diameter of the anchor is 3/8". The length of the anchor is 1-7/8".
Check Stock

Sleeve Anchor 5/16-Inch by 2-1/2-Inch - Hex Head Sleeve Anchors Concrete Bolts Concrete Sleeve Anchors 100

  • CONCRETE BOLTS SLEEVE ANCHORS Sleeve type anchors feature a split expansion sleeve over a threaded stud bolt body and integral expander, nut and washer.
  • HEAVY DUTY SLEEVE ANCHORS made of plated Carbon Steel.
  • CONCRETE SLEEVE ANCHORS Anchors should be installed with carbide tipped hammer drill bits or any other concrete drilling type bits.
  • CONCRETE SLEEVE ANCHOR Perfect for mounting to concrete or block.
  • SIZE: The diameter of the anchor is 5/16". The length of the anchor is 2-1/2".
Check Stock

The RidgePro Roof Anchor, Roofing Tool, Roof Hook for First Man Up (FMU) Last Man Down (LMD) The Ridge Pro Newer Version (No Pole)

  • This is the Newer Version that uses the non-threaded Sherlock RO57 Pole (Not Included) found at most paint and box stores. Remove the threaded tip on the pole, slide on to the RidgePro and insert the included locking pin. Also sold on Amazon, search for RidgePro Roof Anchor Pole.
  • Use as a temporary or permanent fixed-point Roof Anchor, First Man Up (FMU) Safety Device.
  • High-Grade, Light Weight Aluminum Construction with built-in stainless-steel shackle harness and rope receiver.
  • Features Adjustable Pitch-Selection Grid & Incremental Range, Adjusting from 6/12 - 12/12 Roof Pitches.
  • Delivered Securely With Adult Signature Required Upon Delivery.
Check Stock

DRICORE PRO Concrete Repair High Strength Anchoring Epoxy Paste (6 Pack) | Fast Curing, Extra Strength - for Repairing Cracks and Signs of Cracking in Foundations, Walls, Basements, Pools, Cement

  • Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry.
  • High-tack paste resists moisture for application in damp environments and can be used in vertical applications.
  • Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F.
  • Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F).
Check Stock

PC Products 72561 PC-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and Crack Repair, 8.6 oz Cartridge, Gray (Fоur Расk, Gray)

  • Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry.
  • High-tack paste resists moisture for application in damp environments and can be used in vertical applications.
  • Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F.
  • Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F).
Check Stock

Forbidden Body Jewelry 14g Surgical Steel 5mm Synthetic Stone Dermal Top Amethyst Single

  • Our Synthetic Stone dermal jewelry is made with authentic looking faux "gemstones" set in 316L Surgical Steel.
  • These dermal tops are designed to fit a 14 gauge internally threaded anchor.
  • they will also fit with any of Forbidden Body Jewelry's anchors. Choose....
  • Measurements: 14 gauge threaded bar, 5mm top diameter.
Check Stock

10Pcs M8 x 250mm 304 Stainless Steel Fully Threaded Rods, Threaded Rods Bar Studs, Right Hand Thread Long Threaded Screw, M8-1.25 Thread Pitch, Fits for Anchor Bolts, Hangers, U-Bolts (5/16\ x 10\)

  • 【Quality Material】These m8 threaded rod made of 304 stainless steel, which provides excellent corrosion resistance and anti-rust ability for long service life.
  • 【Package Content】You will get valued 10 pack of 8mm x 250mm threaded rods.
  • The fully threaded rods & studs can be drilled, cut, heated and shaped.
  • 【All Threaded Rods】Our stainless steel thread rod can be used for assembly fastening, screw into threaded nuts or tapped holes, cut to your desired length.
  • 【Wide Application】These 5/16 x 10 inches threaded rods are suitable for a wide variety of applications, such as anchor bolt, clamps, hangers, U-bolts, weld projections, even model building and more projects.
Check Stock