Top Threaded Cap Nut

DROP-IN DRAIN Installation Kit for Freestanding Bathtub - with White PVC Pipe and brass pipes

  • DROP-IN DRAIN Installation Kit for Freestanding Bathtub with White PVC Pipe..
  • Quick, easy and clean installation. No access panel required. Needed for all freestanding bathtub installation. The removable / reusable cap allows....
  • Drain kit allows for installation as close to the wall as possible. Plate can be uninstalled if adjustments are needed..
  • cUPC certified. Fits with 1-1/2" male, 1-1/2" female or 1-1/2" threaded bathtub drains..
  • KIT INCLUDES: Drop-In Drain Plate and Lubricant, 1-1/2" Male & Female Adapters, Nut & Gasket, Brass Tailpiece, Threaded Brass Tailpiece, and White PVC....
Check Stock

Slide-Co 163590 By-Pass Wardrobe Track Kit, 60 inch Opening, Diameter-Adjusting Rollers, Steel, 7/8 inch Plastic Wheels

  • Used by Benchmark bi-fold doors and a variety of other bi-fold door manufacturers.
  • Threaded with hex nut and washer for installation.
Check Stock

MroMax M6 Binding Screws M6 x 45mm Stainless Steel Binding Screws and Rivet Socket Cap Connecting for Binding Baby Bed Furniture DIY Leather Scrapbook and Photo Albums 5Pcs

  • 【Dimension】Screw Thread Specification: M6 x 45mm.
  • 【Good Quality】-Made of quality stainless steel material,sturdy and anti-rust, easy to bind, install and remove, can use repeatedly, good tightness..
  • 【Easy to Use】Easily applied with standard screwdriver. Threaded post lets you open and re-attach piece where needed..
  • 【Instructions】Make a hole larger than 0.5mm than the diameter of the nut rod, put screws and nuts on both sides of the locked object, and select the appropriate tool to lock it..
  • 【Wide Application】Especially suit for leather handicrafts decoration, bookbinding, document, book, album, DIY crafts, etc..
Check Stock

MroMax M6 Binding Screws M6 x 50mm Carbon Steel Binding Screws and Rivet Socket Cap Connecting for Binding Baby Bed Furniture DIY Leather Scrapbook and Photo Albums 10Pcs

  • 【Dimension】Screw Thread Specification: M6 x 50mm.
  • 【Good Quality】Made of quality carbon steel material,spraying treatment,sturdy and anti-rust, easy to bind, install and remove, can use repeatedly, good tightness..
  • 【Easy to Use】Easily applied with standard screwdriver. Threaded post lets you open and re-attach piece where needed..
  • 【Instructions】Make a hole larger than 0.5mm than the diameter of the nut rod, put screws and nuts on both sides of the locked object, and select the appropriate tool to lock it..
  • 【Wide Application】Especially suit for leather handicrafts decoration, bookbinding, document, book, album, DIY crafts, etc..
Check Stock

MroMax M6 Binding Screws M6 x 45mm Zinc Plated Carbon Steel Binding Screws and Rivet Socket Cap Connecting for Binding Baby Bed Furniture DIY Leather Scrapbook and Photo Albums 10Pcs

  • 【Dimension】Screw Thread Specification: M6 x 45mm.
  • 【Good Quality】-Made of quality carbon steel material, zinc plated surface, sturdy and anti-rust, easy to bind, install and remove, can use repeatedly, good tightness..
  • 【Easy to Use】Easily applied with standard screwdriver. Threaded post lets you open and re-attach piece where needed..
  • 【Instructions】Make a hole larger than 0.5mm than the diameter of the nut rod, put screws and nuts on both sides of the locked object, and select the appropriate tool to lock it..
  • 【Wide Application】Especially suit for leather handicrafts decoration, bookbinding, document, book, album, DIY crafts, etc..
Check Stock

MroMax M6 Binding Screws M6 x 20mm Zinc Plated Carbon Steel Binding Screws and Rivet Socket Cap Connecting for Binding Baby Bed Furniture DIY Leather Scrapbook and Photo Albums 10Pcs

  • 【Dimension】Screw Thread Specification: M6 x 20mm.
  • 【Good Quality】-Made of quality carbon steel material, zinc plated surface, sturdy and anti-rust, easy to bind, install and remove, can use repeatedly, good tightness..
  • 【Easy to Use】Easily applied with standard screwdriver. Threaded post lets you open and re-attach piece where needed..
  • 【Instructions】Make a hole larger than 0.5mm than the diameter of the nut rod, put screws and nuts on both sides of the locked object, and select the appropriate tool to lock it..
  • 【Wide Application】Especially suit for leather handicrafts decoration, bookbinding, document, book, album, DIY crafts, etc..
Check Stock

6 Pieces 8/32 Inch M4 12 Inch Threaded Rod with Hex Nuts Set Includes 6 Pcs M4 x 300 mm 304 Stainless Steel Fully Threads Studs Rods and 6 Pcs Thread Hex Nuts for Beaded Garden Stake Rods

  • What You Will Get: the package comes with 6 pieces of 8/32 inch M4 12 inch threaded rods and 6 pieces of M4 hex nuts, 12 pieces or 6 set in total, nice combinations for you to make 6 pieces of fairy garden stakes, as well as other DIY crafts.
  • Detailed Size: threaded studs: thread diameter is M4, and measures approx. 300 mm/ 12 inch in fully length.
  • Hex nut: the coarse thread diameter is M4, pitch: 0.7 mm/ 0.03 inches, flat across width: 7 mm/ 0.28 inch and about 2.8 mm/ 0.11 inch high.
  • Threaded Rods Studs: the threaded steel rod is made of quality 304 stainless steel material, sturdy, and resistant to rust or corrosion, with strong construction, hard to deform or break, which can be applied for a long time, and ideal accessories for assembly fastening, just screw into the threaded nut or threaded hole.
  • Hex Nut: the hex nut can be screwed to this threaded rod well, not easy to slip off, besides, it is also an ideal accessory for fasteners, it is also essential in daily life, just need to screw it to the thread metal rods, bolts and other tools of the same size are fine.
Check Stock

Kitchen Sink Hole Cover, 2\ Faucet Hole Cover Sink Basin Stopper Cover Stainless Steel Blanking Plug for Sink Faucet Hole Leakage Prevention, Matte Black

  • Perfectly Clogging: Kitchen sink hole cover diameter 2" fits most any hole on your sink, perfectly covers unsightly holes in your sink, and also replaces rusty and leaky sink hole covers. Keep the kitchen clean and tidy to prevent water leaks..
  • Durable Material: Faucet hole cover is made of zinc alloy, and the threaded cap nut and backing plate are made of stainless steel. Durable, not easy to corrode, can be used for a long time. Equipped with a rubber gasket for a more secure seal..
  • Easy to Install: Put the sink hole cover over the faucet hole, then tighten the wing nut under the sink. The 2" long threaded shank makes it easy to screw into place. Easy installation without tools and without calling a plumber. The washer holds it securely, no need to worry about it coming loose..
  • Beautify Kitchen: The matte black finish perfectly matches your black faucet sink. Smooth surfaces and stylish finishes make your kitchen more beautiful and tidy..
  • 100% Guarantee: All Ancable products come with our 100% No Questions Asked Guarantee. We care about only putting out high-quality products that satisfy your needs. If you have any questions, please contact us..
Check Stock

TPOHH #6-32 Stainless Steel 18-8 (A2) Serrated Flange Hex Lock Nuts, 24 PCS, DIN6923-6-32

  • Flange operates like a washer to distribute load.
  • Screws onto a bolt, cap screw or threaded rod of the same thread size.
Check Stock

Heavy Duty Nut Cracker Nutcracker Pecan Cracker Walnut Cracker Nut Sheller Nut Pliers Opener Tools Wood Base & Handle

  • Heavy Duty Nut Cracker Nutcracker Pecan Cracker Walnut Cracker Nut Sheller Nut Pliers Opener Tools Wood Base & Handle.
  • 100% Brand new and high quality Nut Cracker,all steel machined construction with attractive wooden base and handle grip..
  • Save money by buying bulk nuts and shelling them yourself,prepares nut meats as you need them.Speed up what formerly was a slow,tiresom chore..
  • Unique design cracks soft shell nuts faster,better and easier.Crack pecans,English walnuts,almonds,filberts and Brazil nuts..
  • Material:Wood,steel Nut Cracker,Size:Approx.21cm*6cm*7cm(L*W*T),Instructions:screw handle tight into threaded lever arm,adjust threaded cone for....
Check Stock

EVIL ENERGY AN6 Flare Cap Tube Fitting Hex Head Port Fitting Adapter 2PCS Aluminum

  • 6AN Flare Cap Tube fitting maximum pressure of the fitting is 4000psi (275bar) and the working temperature range is -65º F to 252º F, manufactured....
  • AN flare caps will block off fuel hose line prevent dirt and debris from entering the external threaded hose fittings and adapters..
  • Female pipe plug nut fitting universal application for Diesel, E85, Water,Air Line. The surface is black anodized for great appearance and....
  • Accessories can be used either temporarily or permanently. Cap block off nuts are 100% reusable..
  • EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a product and service..
Check Stock

AOWISH Stainless Steel Chain Links (2-Pack) SS Quick Link 1/2''(12mm) Diameter, Heavy Duty Trailer Safety Chain Hook Carabiner Clip - 2,500 LBS W.L.L (Silver/M12)

  • ✔ [THREADED LATCH] - This safety chain hook is equipped with a threaded end and hex nut to provide enhanced security when connecting your safety chains to your trailer hitch..
  • ✔ [RELIABLE STRENGTH] - With high-strength steel construction, this threaded hook is rated for 2,500 lbs working load limit..
  • ✔ [READY TO TOW] - Threaded trailer safety chain hooks are easy to install. Simply unthread the hex nut and link the hook onto the trailer hitch loop before towing. Then, tighten the nut using a wrench..
  • ✔ [WIDE RANGE OF USES] - Safety chain hooks are great for a wide variety of uses, beyond towing. This 1/2-inch diameter snap hook can be used to attach cargo straps or ropes or as a hand winch attachment hook for a quick connection..
  • ✔ [CORROSION-RESISTANT] - The whole body of AOWISH threaded carabineer safety chain hook is made of stainless steel to achieve long-term safety and reliability in harsh environments. It resists rain, dirt, snow, mud and other corrosive elements..
Check Stock