Top Threaded Wing Nut

Kitchen Sink Hole Cover, 2\ Faucet Hole Cover Sink Basin Stopper Cover Stainless Steel Blanking Plug for Sink Faucet Hole Leakage Prevention, Matte Black

  • Perfectly Clogging: Kitchen sink hole cover diameter 2" fits most any hole on your sink, perfectly covers unsightly holes in your sink, and also replaces rusty and leaky sink hole covers. Keep the kitchen clean and tidy to prevent water leaks..
  • Durable Material: Faucet hole cover is made of zinc alloy, and the threaded cap nut and backing plate are made of stainless steel. Durable, not easy to corrode, can be used for a long time. Equipped with a rubber gasket for a more secure seal..
  • Easy to Install: Put the sink hole cover over the faucet hole, then tighten the wing nut under the sink. The 2" long threaded shank makes it easy to screw into place. Easy installation without tools and without calling a plumber. The washer holds it securely, no need to worry about it coming loose..
  • Beautify Kitchen: The matte black finish perfectly matches your black faucet sink. Smooth surfaces and stylish finishes make your kitchen more beautiful and tidy..
  • 100% Guarantee: All Ancable products come with our 100% No Questions Asked Guarantee. We care about only putting out high-quality products that satisfy your needs. If you have any questions, please contact us..
Check Stock

ASLEEP AT THE WHEEL / Red Wing / 45rpm FJO! record

  • The quick hub wing nut is made of plastic material, durable and high quality.
  • The quick wing nut helps speed up the balancing process with its quick release threads.
  • This tool allows the wing nut to slide in and out of position when the release lever is pressed, which is very convenient to use.
  • There are four dimensions of wheel balancer quick release hub wing nuts for your selection.
  • It fits well with ranger, launch wheel balancers and more.
Check Stock

PAGOW Power Wing Nut Driver Set Wing Nut Drill Bit Socket Wrench Tool Set 1/4 Hex Shank for Panel Nuts Screws Eye C Hook Bolt Q-Hanger

  • SAVES YOUR TIME: Wingnut driver designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurricane....
  • Quickly to tighten, just simply turn the wing nut with a power drill. Your impact driver or drill you drive just about any wing nuts bolt or C head....
  • Just pop it into a power screwdriver and get the wing nut / shutters installed without concern about spraining your thumbs by using other hardware....
  • This Steel wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about 6.55cm(2.6....
  • This little wing nut driver is made from CR-V steel, highly strong and sturdy.
Check Stock

PAGOW 2pcs Power Wing Nut Driver Set Wing Nut Drill Bit Socket Wrench Tool Set 1/4 Hex Shank for Panel Nuts Screws Eye C Hook Bolt Q-Hanger

  • This wingnut driver designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurricane shutters/panels or doing....
  • Quickly to tighten, just simply turn the wing nut with a power drill. Your impact driver or drill you drive just about any wing nuts bolt or C head....
  • Just pop it into a power screwdriver and get the wing nut / shutters installed without concern about spraining your thumbs by using other hardware....
  • This Steel wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about 6.55cm(2.6....
  • This little wing nut driver is made from CR-V steel, highly strong and sturdy.
Check Stock

Gibraltar 9710-TP Straight Cymbal Stand

  • Designed to solve two basic problems we hear about all the time: stands are too heavy And mounting cymbals with wing nuts takes time and is frustrating.
  • Gibraltar turning Point cymbal tripod base is made from chrome plated l-stock aluminum in a sleek arrow design.
  • Gives the stability of double bracing but the weight of single braced stand.
  • Gibraltar patented Swing nut Auto cymbal tilter. Just press down on the spring loaded tilter turn the swing nut, mount the cymbal and felt and that's it, no wing to lose and you saves you time.
  • Re-designed "super-lock" Hinged height adjustment with no metal to metal contact and wing adjust memory lock.
Check Stock

5/8 -11 Grade 2 Malleable Iron Zinc Plated Wing Nuts 5 pk.

  • Price For: Each Basic Material: Malleable Iron System of Measurement: Inch Material Grade: Grade 2 Fastener Thread Type: UNC Nut Style: Wing Nut Fastener Thread Direction: Right Hand Item: Wing Nut Wing Span: 4.50" Height: 1-7/8" Fastener Finish: Zinc Plated Dia./Thread Size: 5/8"-11 Country of Origin (subject to change): Multiple.
Check Stock

Zen Water - Water Filter System, Portable Water Purification System, 4-Gallon Countertop Dispenser

  • Transform tap water into clean, healthy, alkaline mineral water. o-rings and the wing nut are attached to the stem of the ceramic filter.
  • 5 Functions Combined in 1 System: Filter, Purify, Mineralize, Alkalize and Magnetize.
  • Mountain-spring fresh taste by the bottle or cup. Our advanced system's enlightened approach combines activated charcoal (carbon) with far-infrared ceramic, silica sand, and mineral-imbuing stone cartridges.
  • Ceramic filter will last 1,000 gallons or 1 year.
  • 5-Stage mineral filter will last 500 gallons or 6 months.
  • The ceramic O ring is attached to the stem of the ceramic filter. The Magnetic nut is attached to the stem of the Magnetic Tap/Spout. Simply turn the ceramic filter upside down,the o-rings and the wing nut are attached to the stem to prevent the wing nut from scratching/damaging the surface of the ceramic.
  • The Countertop system comes complete with: Micro-Ceramic Filter, 5-Stage Mineral Cartridge Filter, Maifan Mineral Stones and Magnetized Spigot. The System can be used with or without the base. Not recommended for use with microbiologically unsafe water. o-rings and wing nut are attached onto the stem of the ceramic filter..
Check Stock

LONKER (2pc) Power Wing Nut Driver Set,Slot Wing nuts Drill Bit Socket Wrenches Tools Set,1/4\ Hex Shank Drills Bits for Panel Nuts screws eye C hook bolt (2-pcs)

  • This wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about 6.55cm(2.6 inch).
  • the outer diameter of the socket is about 17.8mm(0.7 inch).
  • and the slots on the drill bit tool is 4mm(1.55 inch) wide..
  • 2pcs in a package - This drills nut driver bit designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurri shutters/panels or doing other projects, and saves lots of your time and get your job done more faster..
  • Just pop it into a power screwdriver and get the wing nut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers..
  • quickly to tighten simply turn the wing nut by power drill. your Impact Driver or Drill you drive just about any wing nuts bolt or C head Eye hook screw up to 5x faster than you can by hand.
  • Hurricane Wing Nuts Driver Set A must have tools for hurricane/Snowstorm protection for windows doors hardware.
Check Stock

HighWind Solutions 1/4-20 Wide Washered Wing Nut for Hurricane Panels/Shutters by Mountwell Hardware (25 Pieces)

  • ✔ QUALITY: Premium quality zinc die cast construction that will not rust or corrode..
  • ✔ PURPOSE: Great for use with hurricane panels that utilize the “F” track design and with anchored bolts..
  • ✔ SPECS: Washer Diameter: ⅞” | Threaded Length ¼”.
  • ✔ INSTALLATION: The long wings provide for easy installation by hand and for a snug fit with the wing nut driver (available for purchase).
  • ✔ GUARANTEE: At Mountwell Hardware we take pride in our product quality and craftsmanship and this is backed by our 100% money back guarantee..
Check Stock

WREOW Wing Nut Driver Set 1/4\ Hex Shank Slot Wingnut Drill Bit Socket Wrenches Tools Set for Panel Nuts,Screws Eye C Hook Bolt and Q-Hanger (3 PACK)

  • This compact wing nut driver is made from CR-V steel, highly strong and sturdy..
  • These wing nut driver sets are designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurricane shutters/panels or doing other projects, and saves lots of your time and get your job done more faster..
  • Just pop it into a power screwdriver and get the wingnut / shutters installed without concerning about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers..
  • Quickly to tighten and simply turn the wing nut by power drill. Works on any wing nuts bolt or C head Eye hook screw up to 5x faster than you can by hand..
  • The total length of the tool is about 6.55cm(2.6 inch).
  • the outer diameter of the socket is about 17.8mm(0.7 inch).
  • and the slot cutout is 4mm(0.157 inch) wide..
Check Stock

12-18 inch Adjustable Paint Roller Frame with 12" Painter's Choice Roller Cover,Large Paint Roller for Ceiling Wall Painting

  • 12 - 18 inch Adjustable Screw-fit Paint Roller Frame set, includes 1 x FREE 12" Paint Roller Sleeves..
  • Extra strength steel wing nut design, Use on large areas such as driveways, concrete, decks, walkways, blacktop.
  • The adjustable paint roller frame features a heavy-duty threaded comfort grip, Screw-fitting attaches to all our screw-fit extension poles.
  • Fits paint rollers from 12 inches up to 18 inches.
  • Heavy-duty plastic contoured grip for comfort,Compatible with screw-on extension poles.
Check Stock

PANOVO (2pc) Power Wing Nut Driver Set,Slot Wing nuts Drill Bit Socket Wrenches Tools Set,1/4\ Hex Shank Drills Bits for Panel Nuts screws eye hook bolt

  • 2pcs in a package - This drills nut driver bit designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing shutters/panels or doing other projects, and saves lots of your time and get your job done more faster..
  • quickly to tighten simply turn the wing nut by power drill. your Impact Driver or Drill you drive just about any wing nuts bolt or head Eye hook screw up to 5x faster than you can by hand..
  • Just pop it into a power screwdriver and get the wingnut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers..
  • This wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about 6.55cm(2.6 inch).
  • the outer diameter of the socket is about 17.8mm(0.7 inch).
  • and the slots on the drill bit tool is 4mm(1.55 inch) wide..
  • Wing Nuts Driver Set A must have tools for Snowstorm protection for windows doors hardware.
Check Stock