Top Wing Nut Clamps

LONKER (2pc) Power Wing Nut Driver Set,Slot Wing nuts Drill Bit Socket Wrenches Tools Set,1/4\ Hex Shank Drills Bits for Panel Nuts screws eye C hook bolt (2-pcs)

  • This wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about 6.55cm(2.6 inch).
  • the outer diameter of the socket is about 17.8mm(0.7 inch).
  • and the slots on the drill bit tool is 4mm(1.55 inch) wide..
  • 2pcs in a package - This drills nut driver bit designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurri shutters/panels or doing other projects, and saves lots of your time and get your job done more faster..
  • Just pop it into a power screwdriver and get the wing nut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers..
  • quickly to tighten simply turn the wing nut by power drill. your Impact Driver or Drill you drive just about any wing nuts bolt or C head Eye hook screw up to 5x faster than you can by hand.
  • Hurricane Wing Nuts Driver Set A must have tools for hurricane/Snowstorm protection for windows doors hardware.
Check Stock

STEELSOFT Extra Thick (6-ply) Flexible Dryer Vent Duct Hose 4 inch 8 Feet Heavy Duty, 4'' Aluminum Foil Ducting Pipe Tube Dryer Hose Vent Kit with 4 Metal Hose Clamps

  • ...er is slightly larger than 4'' to fit most US standard dryer vent hose connector. Both inner plastic reinforced ends are great for quick installation. The flexible dryer vent hose maintains 4in diameter inside, whether compressed or stretched. Stretch it to 8 ft long or compress a little for 5 feet short..
  • More Hose Clamps: Our dryer vent hose kit is with 4 piece hose clamps. 2 wing nut hose clamps are perfect to dryer vent hose for tight space quick connect or disconnect, as you do not need a tool. For some dryer models, the key type maybe not available so you can use other 2 pcs 5/16" Hex dryer hose clamps optional..
  • Multi-Purpose: STEELSOFT 4 inch flexible duct is very handy for many HVAC applications, such as clothes dryer vent pipe, bathroom exhaust fan, grow tent vent and portable ac unit. It is a durable and heavy duty 4 inch flex duct hose for less replacement!.
Check Stock

STEELSOFT Extra Thick (6-ply) 4 inch Flexible Dryer Vent Hose Tubing 25 Feet Extra Long Heavy Duty, 4'' Aluminum Foil Flex Duct Hose Air ducting Pipe for Exhaust Fan Grow Tent with 4 Clamps

  • ... vent hose maintains 4in diameter inside, whether compressed or stretched. You can stretch it to extra long 25 ft or cut the dryer vent pipe into suitable length by a utility knife and wire cutter. Our 25 feet model is without plastic inner reinforce ends like 8 feet, but it is still very easy to install..
  • More Hose Clamps: Our dryer vent kit is with 4 piece hose clamps. 2 wing nut hose clamps are perfect to dryer vent hose for tight space quick connect or disconnect, as you do not need a tool to tighten. For some dryer models, the key type maybe not available so you can use other 2 screw clamps optional. For grow tent ducting, you will need to cut several air duct so 4 clamps for securing are perfect!.
  • Multi-Purpose: STEELSOFT 4 inch foil flex duct is very handy for many HVAC applications, such as dryer vent pipe ducting, bathroom exhaust fan, grow tent ventilation and portable air conditioning unit 4 inch air duct vent hose. It is a much more durable and heavy duty 4 inch aluminum ducting rigid for less replacement..
Check Stock

VCT 24 pc Butt Welding Clamps Weld Sheet Metal Auto Car Door Skin Panel Fender New

  • Suitable for metal straight panel or curved panel complex industry. These small fixtures hold panels of any shape anywhere-edge-to-edge, and are fully fixed before butt welding, leaving only a small gap that allows the weld to fully penetrate. Once the two parts are tack welded together, the wing nut is loosened, and the elbow lever is removed and the clamp is removed from work before final welding..
  • To align and clamp sheet metal panels for precise spot welding,butt welding,edge-to-edge welding and tacking in place.
  • For precise spot welding, positioning, butt welding and edge-to-edge welding, fully align and clamp the metal plates..
Check Stock

WREOW Wing Nut Driver Set 1/4\ Hex Shank Slot Wingnut Drill Bit Socket Wrenches Tools Set for Panel Nuts,Screws Eye C Hook Bolt and Q-Hanger (3 PACK)

  • This compact wing nut driver is made from CR-V steel, highly strong and sturdy..
  • These wing nut driver sets are designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurricane shutters/panels or doing other projects, and saves lots of your time and get your job done more faster..
  • Just pop it into a power screwdriver and get the wingnut / shutters installed without concerning about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers..
  • Quickly to tighten and simply turn the wing nut by power drill. Works on any wing nuts bolt or C head Eye hook screw up to 5x faster than you can by hand..
  • The total length of the tool is about 6.55cm(2.6 inch).
  • the outer diameter of the socket is about 17.8mm(0.7 inch).
  • and the slot cutout is 4mm(0.157 inch) wide..
Check Stock

GOVALVE Sanitary Stainless Steel Tri-Clamp - Heavy Duty Sanitary Clamp with Wing Nut for Ferrule TC (50.5mm) with Silicone Gaskets Pack of 2

  • Flange Size: 50.5MM. Fits to 1.5 inch sanitary tri-clamp tube..
  • Easy Tighten Thumb Screw: Single pin heavy duty clamp with cross hole wing nut. Easy to use and quick to assemble..
  • Corrosion Resistance: 304 stainless steel has strong oxidation resistance and does not corrode. Preventing rust processes for the whole body..
  • Heavy Duty Single Tri Clamp: Fits for all other home brew stuff sanitary fittings sanitary hose connections..
  • Package include: 2 pcs Clamps and 2 pcs silicone gaskets..
Check Stock

PANOVO (2pc) Power Wing Nut Driver Set,Slot Wing nuts Drill Bit Socket Wrenches Tools Set,1/4\ Hex Shank Drills Bits for Panel Nuts screws eye hook bolt

  • 2pcs in a package - This drills nut driver bit designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing shutters/panels or doing other projects, and saves lots of your time and get your job done more faster..
  • quickly to tighten simply turn the wing nut by power drill. your Impact Driver or Drill you drive just about any wing nuts bolt or head Eye hook screw up to 5x faster than you can by hand..
  • Just pop it into a power screwdriver and get the wingnut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers..
  • This wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about 6.55cm(2.6 inch).
  • the outer diameter of the socket is about 17.8mm(0.7 inch).
  • and the slots on the drill bit tool is 4mm(1.55 inch) wide..
  • Wing Nuts Driver Set A must have tools for Snowstorm protection for windows doors hardware.
Check Stock

Goldblatt Drywall Sanding Block Hand Sander with Handle Sandpaper Holder Tool for Wood Drywall Metal Auto Body Polishing

  • PLATE SIZE & MATERIAL - Measures 9.5-inch x 3.1-inch. Made of hard aluminum, features with heavy duty foam for sanding cushion. Reinforced tempered....
  • COMFORTABLE HANDLE - PP+TPR, cushioned rubber soft grip reduces fatigue and provides no-slip grip, easy for one-handed operation.
  • WING NUT DESIGN - Screw clamp design holds abrasive sheets firmly. Fits half sheet of standard sandpaper or use with die-cut.
  • HOW TO CHANGE THE SANDPAPER - Step 1: Unscrew the wing nut, open the clip. Step 2: Insert sanding sheet under clip and screw the wing nut. Step 3:....
  • WIDE APPLICATION - For use with die-cut or a half sheet of standard sandpaper. Great for drywall sanding, flat surface of wood, metal, automotive,....
Check Stock

FLKQC Butt Clamps 16 pcs Butt Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding Butt Clamp

  • Butt Clamps Specification:Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • How To Use Butt Welding Clamps : Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Great Quality Butt Welding Clamps: Panel welding clamps are constructed of galvanized steel material to ensure maximum durability and strength while resisting rust.
  • Butt Clamps Wide Application: Use the Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Butt Clamps Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Pagow Deep Power Wing Nut Driver Set- Slot Wing Nuts Drill Bit Socket Wrenches Tools Set Hex Grooved Socket for Panel Nuts Screws Eye C Hook Bolt Q Hanger 1/4 Hex Shank 2

  • Size: this steel wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about....
  • This drills nut driver bit designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurri shutters/panels or....
  • Just pop it into a power screwdriver and get the wingnut / shutters installed without concern about spraining your thumbs by using other hardware....
  • Quickly to tighten simply turn the wing nut by power drill. your Impact Driver or Drill you drive just about any wing nuts bolt or C head Eye hook....
  • This nuts tools A must have for hurricane Snowstorm prone areas.
Check Stock

2 pcs Power Wing Nut Driver,Wing Nut Drill Bit Socket Wrenches Tool 1/4 Inch Hex Shank for Panel Nuts Screws Eye C Hook Bolt 1PCS

  • This steel wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank).
  • The total length of the tool is 6.55cm(2.6 inch).
  • the outer diameter of the socket is 17.8mm(0.7 inch).
  • and the slot cutout is 4mm(0.157 inch) wide.
  • Designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurricane shutters/panels or doing other projects, and....
  • Just pop it into a power screw driver and get the wings nut / shutters installed without concern about spraining your thumbs by using other hardware....
Check Stock

Quickie 24-Ounce Heavy-Duty Wet Mop

  • 56-inch commercial grade hardwood handle.
  • 56-Inch commerical grade hardwood handle.
Check Stock