Top Torque Cam For M107

Jet Tools CS-315, 315mm 1-Phase Ferrous Manual Cold Saw (414229), Standard

  • DURABILITY: Blade drive reduction gearbox operates in an oil bath..
  • FLOOD COOLANT SYSTEM: 1-1/3 gallon coolant reservoir and pump with flow control system extends blade life..
  • REPEAT CUTS: Fully-adjustable material depth stop for sawing repeatability and increased production..
  • MAXIMUM TORQUE: Hardened and ground direct-drive worm shaft, and bronze worm wheel, transmits maximum torque to the saw blade..
  • BURR-FREE CUTTING: Quick-clamping cam-action vise with adjustable gib and material support bar..
Check Stock

Universal Cam Pulley Holder Tool & Crankshaft Damper Pulley Holding Holder Harmonic Tool for Lexus & Toyota

  • ...V6, 4.0 V8, 4.3 V8, 4.7 V8. Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ..
  • Harmonic Damper Pulley Holder – Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on many Toyota & Lexus engines..
  • Cam Pulley Holder – Great holding tool for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc. Designed with grooved pins to hold camshaft sprockets stationary to remove the bolts, which will work well to hold the pulley to stop it from spinning while tightening/loosening the bolt..
  • SUPERIOR QUALITY – Made of high quality steel with black finish for durability and perfect match, resisting rust and corrosion, ensures a long term service..
  • 100% SATISFACTION GUARANTEE: If you're not 100% satisfied with our tools, simply return it for a full refund in 30 days. Premium Support & 12 Months’ Warranty..
Check Stock

PRO BIKE TOOL 17 in 1 Bike Multitool & Adjustable Torque Wrench Set - 4, 5, 6 NM

  • ...Built to Last multi tool – the Seventeen tool uses precision CNC machined steel tool bits and a lightweight aluminum body to achieve a functional, durable and portable multi-function tool. The perfect multifunctional pocket companion for the open road or trail..
  • Accurate Torque Measurement to 4, 5, 6 Nm.
  • three torque levels to cover most recommended manufacturer tightness settings in one tool. Includes four interchangeable tool bits: 3, 4, 5mm hex / allen and T25 to cover most bike needs - including adjusting stem clamps, seatposts, headsets, handlebars and lever clamps. Please Note: Includes 6mm Allen key to turn dial..
  • A Pocket Workshop - includes tools: Allen / Hex key (mm): 2 | 2.5 | 3 | 4 | 5 | 6 | 8, Star Shaped/Hex Tool (Torx) T25 and Phillips Head 2 (PH2) cross drive, Spoke gauge: 13 | 14 | 15 | 16 | Mavic Spline, Chain Tool 8 to 12 Speed (Splitter) and Bottle Opener! 360 degree tool bit movement. Also includes slim, stylish and discreet bag to safely protect the bike tool..
  • Peace Of Mind - Have you ever worried about over-tightening a bolt and damaging your bike? Remove guesswork and risk with our torque wrench, ....
Check Stock

Brian Tooley Racing BTR Truck Stage 3 Includes Cam, Beehive Springs, Pushrods, Michigan Motorsports Seals Fits Silverado Sierra Vortec 4.8 5.3 6.0 6.2

  • Brian Tooley Racing BTR Stage 3 Truck Cam, Beehive Springs, Michigan Motorsports Seals, 7.400" Chromoly Pushrods 4.8 5.3 6.0.
  • The Brian Tooley Vortec Racing Truck Cam Kit includes: Stage 3 Truck Cam, Beehive Springs, Set of VS LS Hat Seals, 7.400 Chromoly Pushrods.
  • Stage III Camshaft Specs Specs: 218/224 .553/.553 110+0 Requires a 3 bolt timing gear..
  • STAGE 3 SPECIFICS: The Stage 3 V2 camshaft is an amazing all around grind for the truck enthusiast. You sacrifice some low end torque in the pursuit of more power higher in the RPM range, but gain an idle note that is distinctly BTR! Stage 3 grind, it is still a tow-friendly camshaft, just not ideal for the everyday hauler. An aftermarket converter is highly recommended with this grind.Excellent for 4.8 5.3 6.0 6.2 Silverado, Sierra, Yukon, Tahoe, Suburban, Escalade.
  • Will work with stock converter in some trucks, but recommended to install a 2800-3000 converter for best overall performance..
Check Stock

Hi-Spec 44 Piece 1/4” Hex Shank Impact Driver Screw Bit Set S2 Steel Screwdriving for Drill Drivers

  • RAPID DIY: Drive into hard surfaces and turn tight nuts with the Hi-Spec Impact Driver Screw Bit Set.
  • HIGH TORQUE: Outperforms standard Cr-V bits when maximum torque is delivered in hard-stop fastening.
  • SET FOR LIFE: Get essential bits including Torx, Pozidriv, Hex Allen with HVAC nut drivers and more.
  • FOR IMPACT: Machined tips reduce stripping and cam-out. A torsion zone distributes excessive stress.
  • TEMPERED: S2 shock-resistant steel and protective phosphate coatings improve ductility and hardness.
Check Stock

PRO BIKE TOOL 20 in 1 Bike Multitool & Adjustable Torque Wrench Set - 4, 5, 6 NM

  • Built to Last multi tool – the Twenty tool uses precision CNC machined steel tool bits and a lightweight aluminum body to achieve a functional, durable and portable multi-function tool. The perfect multifunctional pocket companion for the open road or trail..
  • Accurate Torque Measurement to 4, 5, 6 Nm.
  • three torque levels to cover most recommended manufacturer tightness settings in one tool. Includes four interchangeable tool bits: 3, 4, 5mm hex / allen and T25 to cover most bike needs - including adjusting stem clamps, seatposts, headsets, handlebars and lever clamps. Please Note: Includes 6mm Allen key to turn dial..
  • A Pocket Workshop - includes tools: Allen / Hex key (mm): 2 | 2.5 | 3 | 4 | 5 | 6 | 8, Torx T25 and T30, Phillips Head 2 (PH2), Flat Head 5, Spoke Wrench: 3.2mm | 3.5mm | Mavic M7 and M9, Wrench (mm): 8 | 9 | 10, Chain Tool 8 to 12 Speed (Splitter) and Valve Core Tool! 360 degree tool bit movement. Also includes slim, stylish and discreet bag to safely protect the bike tool..
  • Peace Of Mind - Have you ever worried about over-tightening a bolt and damaging your bike? Remove guesswork and risk with our torqu....
Check Stock

Brian Tooley Racing BTR Truck Norris Camshaft Install Kit for Chevrolet GM Gen III/IV LS 4.8 5.3 6.0 Vortec Trucks (4.8L / 5.3L Engines)

  • BTR GEN III & IV LS Truck Norris Cam Install Kit for 1999-2013 4.8 5.3 6.0 6.2 Engines.
  • The Truck Norris will deliver a roundhouse kick in the pants to your 1999-2013 Silverado or Sierra. Developed from hundreds of hours of in house cam lobe design and dyno testing, this camshaft has more power and torque everywhere in the curve compared to our legendary V2 truck cams..
  • VVT engines will require a VVT delete kit. If installing in an engine originally equipped with a 1-bolt camshaft, a 3 bolt conversion kit will be required..
  • Our kit takes the guesswork out and includes the following: Truck Norris Camshaft, Beehive Springs with Valve Stem Seals, Delphi Lifters with Guides, MLS head gaskets, Front Cover Gasket with Front Seal and water pump gaskets, and GM crank bolt.
Check Stock

Makita XDT16Z 18V LXT Lithium-Ion Brushless Cordless Quick-Shift Mode 4-Speed Impact Driver Tool Only Renewed

  • Quick shift mode uses the Brushless motor’s electronic controls to find the best balance of speed and torque for each application for more efficient....
  • Bl Brushless motor delivers 3, 600 max RPM and 1, 600 inches pounds of max torque.
  • 4 Speed power selection (0 1, 100/ 0 2, 100/ 0 3, 200/ 0 3, 600 RPM & 0 1, 100/ 0 2, 600/ 0 3, 600/ 0 3, 800 IPM) provides precise fastening control....
  • Additional one touch 4 speed power selector button under the chuck for added convenience.
  • Assist mode (a mode) feature helps eliminate "screw cam out" And "cross threading" By driving at low speed until tightening begins.
Check Stock

PRO BIKE TOOL Adjustable Torque Wrench Set - 4, 5, 6 NM - Shop Quality Bicycle Multitool Suitable for Home Use - Includes 3, 4, 5mm Allen, T25 Tool Bits - Maintenance Kit for Road and Mountain Bikes

  • Accurate Torque Measurement to 4, 5, 6 Nm.
  • three torque levels to cover most recommended manufacturer tightness settings in one tool. Includes four interchangeable tool bits: 3, 4, 5mm hex / allen and T25 to cover most bike needs - including adjusting stem clamps, seatposts, headsets, handlebars and lever clamps. Please Note: Includes 6mm Allen key to turn dial..
  • Peace Of Mind - Have you ever worried about over-tightening a bolt and damaging your bike? Remove guesswork and risk with our torque wrench, which prevents over-tightening bolts and damaging your carbon fiber or lightweight components. Includes ‘cam-over’ feature, ensuring the torque wrench will continue to ‘click-out’ once torque is reached. It ensures a bolt cannot accidently be over torqued. Each tool is fully tested..
  • Built To Last & Comfortable To Use - Internal construction made from carbon steel. Ergonomic composite mold handle for comfortable use and to help apply the correct force..
  • Lightweight And Portable - Small and lightweight, making it a perfect tool for your bike box so that you can rebuild your bike on vacation or a weekend away with no....
Check Stock

Axe Crossbows AX405 - Shoot Through Riser, Integrally Mounted 3 Arrow Quiver, Multi Range Illuminated Reticle Scope, (3) Micro Diameter Bolts with 100 Grain Practice Tips Included, Model AX40001

  • COMPACT & MANEUVERABLE: At 27.75-inches long and 10-inches axle-to-axle (cocked), the weight of the AX405 crossbow is centered over the shooter’s hand by way of a balanced shoot-through stock and riser design and reverse limb system..
  • POWERFUL BOLT SPEED: This configuration empowers the most efficient part of the AX405 210-pound split limbs to deliver bolt speeds in excess of 400 feet-per-second, from just 13-inches of power stroke..
  • PROPRIETARY CAM SYSTEM: Links by cables that run parallel to each other eliminate cam-lean, limb torque and is further enhanced by an exclusive cable brace that engages the riser to aid in the limitation of flex away from the center of the crossbow..
  • UNMATCHED EFFICIENCY: Unlike the one-piece aluminum rail concepts of conventional crossbow designs that rob speed, efficiency and bolt life, the stock of the AX405 eliminates the rail and utilizes dual carbon guide rods along the length of the stock..
  • ENHANCED SPEED & ACCURACY: When combined with the shoot through riser and a roller rest on the bow’s front end, the features create a free-floating arrow system that mitigates contact, friction and torque along the arrow’s entire path..
Check Stock

Makita XDT19Z 18V LXT® Lithium-Ion Brushless Cordless Quick-Shift Mode™ 4-Speed Impact Driver, Tool Only

  • Quick-Shift Mode uses the brushless motor’s electronic controls to find the best balance of speed and torque for each application for more efficient fastening.
  • Makita-built brushless motor delivers 3,600 Max RPM and 1,590 in.lbs. of Max Torque.
  • 4-speed power selection (0-1,100/ 0-2,100/ 0-3,200/ 0-3,600 RPM & 0-1,100/ 0-2,600/ 0-3,600/ 0-3,800 IPM) provides precise fastening control for a wide range of applications.
  • Additional one-touch 4-speed power selector button under the chuck for added convenience.
  • Assist Mode (A-mode) feature helps eliminate "screw cam-out" and "cross threading" by driving at low speed until tightening begins.
Check Stock

BOSCH ITPH21B Impact Tough 1 In. Phillips #2 Insert Bits

  • Xtended torsion zone helps to absorb high-torque of new impact drivers.
  • Precision-engineered tips for a tighter fit and less CAM out.
  • Heat-treated manufacturing for stronger bit.
  • High-visibility sleeve with laser-etched markings for user convenience.
Check Stock