Top Trailer Brake Wire

WOFTD 4-Way Trailer Wiring Harness with 5 ft Wires 4-Pin Trailer Wiring Jacketed Cable 4 Flat Trailer Wire Extension Connector - 5 ft

  • WOFTD 4-Way Trailer Wiring Harness with 5 ft Wires 4-Pin Trailer Wiring Jacketed Cable 4 flat trailer wire Extension Connector - 5 ft.
  • The WOFTD 4-way trailer Wiring Harness, the wire is made of 18AWG brass material, The safe temperature is below 105 degrees Celsius and the safe voltage is below 300V. It is wrapped with insulating rubber that will never rust or corrode..
  • This 4-pin trailer wiring plug comes ready to splice into your existing trailer wiring It can be used to connect the taillights, brake lights and turn signals. 4 Way Flat Trailer Wire Harness Connector Socket for Trailer Truck Hitch Wiring..
  • The 5-ft wire lead provides plenty of extra length for a flexible installation.(The Trailer Wiring Harness perfect adapt WOFTD Trailer Plug Adapter).
  • Please feel free to contact us at first if there is any problem when you receive or use our products. We are always here to support you..
Check Stock

LINKITOM Trailer Lights Welded Mount Steel Boxes Kit w/6 inch LED Oval Tail Lights & 2 inch LED Red Round Side Lights w/ Grommet wire connectors 2 Pack

  • Trailer Light Kit: includes 2 X Welded Mount Heavy Duty Steel Boxes, 2 X 6" Oval Red LED Trailer Lights w/ Rubber Grommets and wire connector.
  • 2 X 2" Round Red LED lights w/ Rubber Grommets.
  • Steel Trailer Light Boxes: Made by 14 gauge heavy duty steel, protect the LED tailer light effectively. The steel box housing is design of excellent moisture-proof sealed and IP 67 waterproof makes it be definitely waterproof..
  • Super Bright: Led Trailer Lights has bright LED diodes with super high visibility, light up the rear or side of your vehicle or trailer in daylight, midnight, raining or fog days. Improve the drive security and avoid accidents..
  • Brake& Turn Taillight: Function as tail lights, turn/brake lights and side marker light. Fit for heavy truck, trailer, boat, bus, lorry, van, caravan, snowmobile, etc.,.
  • Simple Installation: Led trailer lights with black rubber grommet are mounted on the box. wiring them for installation to the corresponding wire on trailer. And then weld on the light box to the trailer frame..
Check Stock

Genuine Honda 2019-2020 Pilot Trailer Hitch Wiring Harness

  • 4 Pole Flat Trailer Plug Connect 6/12/24V with 32" Color-coded Lead Wire, Safely Extend Towing Lights without Consequently Having a Dimmer Light.
  • Used for All Types of Vehicles Like Trailer, Truck, Motorcycle Trailer, ATV Trailer.
  • 4 pins flat plug adapter is designed to supply power for tail lights, turn signals and brake lights and other signal lights as well as a ground connection..
  • Heavy-duty 18-gauge wires for strength and longevity.
  • Made from durable rubber-molded and color-coded bonded loop wire to easily connect with your vehicle's wiring system..
  • 4-way standard flat light connector with trailer ends.
  • For all types of trailers including marine boat trailer, horse trailer, motorcycle trailer, ATV trailer, and other cargo utility trailer hitches (tow/haul vehicle must have 4-way plug).
Check Stock

Nilight Magnetic LED Trailer Towing Light Kit 24ft Cable with 7 Pin Plug Tail Stop Amber Turn Signal License Plate Light on 12V RV Pickup Trucks Marine Boats Trailers, 2 Year Warranty (5 Wire System)

  • ... systems only (with turn signals and brake light separated). It will not work for pickup SUVs with 4 wire tail light system such as 2005 Nissan Frontier 4x4 nismo, 2001 Ford F550. If using them for 4-wire vehicles, the brake light will light up in the wrong amber color instead of red color. Please double-check your trailer wiring plug connector before installation..
  • Multi-functions: 24ft cable to light with a Standard 7 Pin Plug, fit for 5-7 wire flat Pin Adapter, combined full functions of stop/brake light, tail light, rear Position, direction indicator, reflector, and license plate light(Right light no license plate light), but not has the back up lights.
  • Fit most USA 5 wire systems standard 12V trailer, RVs, campers, trucks, UTEs, UTVs, construction vehicles, loaders, boats, flatbeds, caravans, etc..
  • Excellent Brightness: Left lamp has 16 diodes including 6 diodes for license plate light. Right lamp has 10 diodes including 5 Diodes for right turn signal, 5 diodes for tail light. Quality LEDs draw less amperage but outputs optimal brightness, improving great visibility and extend longer lifetime than the incandescent lamp. DOT Compliance to ensure your 100% safety....
Check Stock

CARROFIX Multi-Tow 4-Way to 7-Way RV Blade and 4-Way Flat Female Trailer Wiring Adapter Connector Kit

  • ▶ Multi-Function Design - This dual-output vehicle end trailer wiring adapter converts any 4-way flat, vehicle-end plug to a combination 7-way outlet and 4-pole flat outlet, making it easy to tow different trailers with your vehicle.
  • ▶ Weather Resistant - This trailer wire connector comes with protective cover for 4 pin and 7 pin socket to keep the terminals clean when not in use. The wiring harness is also well-protected with the included split loom.
  • ▶ Prewired for Easier Installation - The Trailer wiring harness plugs into existing 4-way flat connector and hardwires to existing wiring to get additional functions needed for 7-way (some splicing required).
  • ▶ Standard Connection - This trailer wiring adapter's 4 Way flat output connects tail lights, brake lights, and turn signals, 7-Way connects tail, brake, reverse, turn signals, and auxiliary power.
  • ▶ Easy and Cost Effective - Provide all the needed electrical and mounting hardware connector kit to provide BOTH the 4 and 7 wire plug in for your trailer.
Check Stock

WildAuto 10Pcs 3 Prong Pigtail Wire Plug, Right Angle 3-Wire Trailer Light Plug, 3-Wire Pigtail for Truck Trailer Side Marker Clearance Lights, for Trailers Trucks Tail Lights

  • 【Package included】10Pcs Right Angle 3-Wire Trailer Light Plug.
  • 【Easy to install】White Wire: Ground (Negative). Red Wire + White Wire: High Brightness, worked as Stop/Turn/Brake Light. Black Wire + White Wire: Low Brightness, worked as Tail/Running Light. (White wire: ground)..
  • 【Universal plug】3 Prong Pigtail Wire Plug is suitable for Trailers Trucks Tail/Turn/Stop/Brake/Reverse/Parking Lights..
  • 【Applications Widely】3 Prong Pigtail Wire Plug is suitable for 12V vehicles, For use on Semi Trucks & Trailers, ATVs, UTVs, Campers, Tractors, Service Trucks, Buses, Service Vans, Utility Trucks, Parade Floats, Horse Trailers, Utility Trailers, Pick Up Trucks, and ect..
  • 【Note】The 3-wires may not follow the "universal" trailer light plug wiring diagram, please just switch the red and white wire for a try..
Check Stock

Partsam 2Pcs LED Truck Trailer Tail Lights Bar Kit 40 LED Waterproof Tail Turn Signal Brake Light Running Reverse Light with Iron Net Protection 5 Wires 10V-30V for Truck Boat Trailer UTV RV Camper

  • Package includes 2pcs 40 LED Trailer Tail Light Bar. It is ideal for most towing vehicles equipped with 10V to 30V DC power supply, such as RV, campers, trailers, trucks, UTEs, UTVs, engineering vehicles, loader, boats, flatbed, vans, caravans, Excavator,Reaping machine and so on,can improve safety give your car a new look.
  • Trailer tail light bar adopts 40 pcs advanced LED with high brightness, long lasting, bright LED technology. Over 100% brighter than Stock units. Life span of over 50,000 hours. Our replacement trailer tail lights may very well outlast your truck! We do build a 2" X 4" reflector into the red portion of the lens, which will make them legal to use.
  • There is Iron bracket on the backseat and the iron net in front of the lampshade, which is stronger than others such as just pure plastic and protect the whole LED light bar effectively and prolong its service life.
  • 5-WIRE connection system for Negative, Turn Signal, Brake Light, Running Light and Reverse Light: Black Wire - Negative.
  • There are two mounting studs on the back with nuts to lock them in place. just cut your current tail lights wire harness one by one and matc....
Check Stock

Tonsya 3-in-1 Smoked Lens Universal LED Hauling 2' Receiver Compatible with Truck SUV RV Trailer Rear Bumper Driving lamp Brake Tail Reverse Tow Hitch Cover Light

  • FITMENT: Compatible with Truck SUV Trailer RV..
  • function : Comes with four way connector that provides running light, brake light and reverse light functions.Universal fit all pickup, trucks, SUV, Jeep with Class III 2" x 2" hitch receiver..
  • Installation: Plug-and-play wire harness that requires a standard 4 Way Flat Plug for brake lights only. To use the reverse LED light function you need to splice the white wire into your car's reverse light bulb's positive wire. (Use Notes: The trailer hitch mounted LED tail brake light will not blink while your turn signals are exclusively in use. However, it will blink if both your brake lights and your turn signal lights are active)..
  • Sealed and Waterproof: ABS plastic housing processed with ultrasonic treatment,anti-scratch, no faded with long-time exposure and can adapt to all kind of extreme weather,no moisture inside after a heavy rain or car wash..
  • Package Include: 1 x brake light..If you have any questions about our products, please feel free to contact us by email.Waterproof IP65, shockproof, dustproof, 50000+ hours life-span, 90 DAY WARRANTY..
Check Stock

Oyviny Universal Diode Wiring Kit with 4 Diodes for Dinghy Towing, Towed-Vehicle RV Wiring Harness

  • Trailer Diode Wiring Kit. This universal tow car wiring kit use a diodes system to wire the towed vehicle's brake lights, running lights and turn signal lights to your RV electrical system. Diodes protect both vehicle's electrical system from electrical feedback.
  • Towed-vehicle wiring harness kit is ideal solution to connecting your vehicle's electrical system to your RV while dinghy towing, allows your car using the existing light system, you don’t need to carry a set of spare magnetic tow lights any more!.
  • Widely Used. Dinghy trailer wiring harness can be wired to most vehicle, universal kit works with 2-wire(combined system) and 3-wire(separated system) lighting systems. For applications that have separate lighting, this kit will cause your brake lights to function as both brake and turn lights. A converter(RM-732) is required if you want to separate it.
  • Easy to Install. RV dinghy towing wiring comes with step-by-step installation instructions to help easy installation, simply wire the towed vehicle and attached the diodes, wire the motorhome and connect the power cord to the motorhome and towed vehicle.
Check Stock

Kuryakyn 2595 Motorcycle Accessory: Plug & Play Trailer Wiring with Relay Harness for 2014-19 Harley-Davidson FLH/FLT Motorcycles with 5-Wire Trailer , Black

  • Allows you to safely and effectively apply the load from your trailer lighting the the battery.
  • Eliminates overloading stock lighting or accessory circuits.
  • Relay harness utilized inputs from the motorcycle to direct power from the battery to the appropriate trailer lighting circuit.
  • Kit provides standard 5-wire output (run, brake, left turn, right turn, ground).
  • Does not include receptable kit due to varies style required by trailer manufacturer.
  • Includes (1) relay module 5 wire, (1) 5 pin trailer plug harness, (1) inline blade style fuse holder, and (1) hardware kit.
  • Suggested for installation (not included): wire stripper/cutter, wire crimpers, #2 phillips screwdriver, socket and ratchet set, in-lbs (Nm) torque wrench.
  • Compatible with 5-wire trailers on Harley-Davidson models: '14-'19 Electra Glides, Road Glides, Street Glides (excludes '14-'15 FLHTKSE, '15 FLTRUSE), and Road King Special.
Check Stock

Partsam Waterproof 17" Inch High Power 40 LED Red Utility Trailer Truck RV Stop Tail Turn 3rd Brake Marker Identification Light Bar w/Chrome Bezel DOT Compliant (Pack of 2)

  • Package includes 2 Pieces 17 Inch Thin LED Trailer tail Light Bar with Chrome Plastic Bezels, Red Lens. Nuts and bolts included for complete mounting and chrome covers dress it up very nice.
  • Each red led light bar has 2 rows of leds and is powered by 40 high power Super FLUX LED totally for a bright performance. Dimensions: 17.12"(L)*1.58"(W)*0.83"(H), hole to hole distance: 16" approx..
  • This led brake light strip has 3 wires coming out of the back that will connect to your existing trailer wiring: white wire is the ground, black wire is the tail light and red wire is the brake light/break light. Usually the turn signal light is the same as the brake light. It really depends on the application you are using it for.
  • This red light bar is universal for Semi Trucks, Trailers, motorhomes, Buses, Vans, Utility Trucks, Horse Trailers, Utility Trailers, Pick Up Trucks etc..
  • Installation is easy: drill a hole for the wiring to pass through, then added a thick circle of silicone caulking around the hole, again drill mounting holes and using the supplied bolts and nuts, just bolt them down. As the red led strip....
Check Stock

MECMO Multi-Tow 4-Way Flat to 7-Way RV Blade and 4-Way Flat Female Trailer Wiring Adapter Connector Kit Adapt 4-Way Flat Vehicle-Side Socket to Multiple Trailer Plugs with Mounting Bracket

  • 【Multi-Plug】This dual-output 4 Pin and 7 Pin trailer wiring adapter makes it easy to tow different trailers with your vehicle, for used to convert any 4-wire flat vehicle-end plug to a combination 7-way blade RV outlet and 4-way flat outlet. Provides multiple towing options from one vehicle-end connector for towing any heavy / light duty trailers. This special dual-output electrical adapter allows a connection to be made between a mismatched trailer plug and vehicle socket..
  • 【Universal Trailer Adapter】MECMO Multi-Tow 4&7 trailer connector adapter provides two standard trailer connections, a 7-pin RV blade and a 4-way flat socket, adapting for versatile towing options. Additional leads for brake, reverse and power function allowing you to transfer your 4-pin factory connector to a standard 7-way..
  • 【4 Flat & 7 Way Blade Output】 Dual 4 way and 7 way trailer hitch wiring adapter allows you to connect 4 poles or 7 poles trailer to your factory 4 pin socket to power taillights, brake lights, turn signals, reverse lights, electric trailer brakes and auxiliary power (12V+ wire)..
  • 【Heavy Duty】 Both 7-way RV output socket and 4-way flat equip with a tight-fitting dust cover and a spring loaded cover to keep terminals clean when not in use.....
Check Stock