Top Trailer Jack Caster Wheels

NBJINGYI 6 Trailer Swirl Jack Caster Wheel Replacement 1200lbs Capacity with Bolt and net

  • 6" 2000lbs Replacement trailer jack wheel.
  • Replacement caster wheel with bolt and net.
  • NBJINGYI specializes in the production of trailer accessories. It has a group of professional and advanced production equipment and technical....
Check Stock

Swivel Trailer Jack 2000lbs Capacity, 10.5" Lift, Dual 8" Wheel, Heavy Duty Boat Trailer Jack for Tongue Swing-Back Boat, RV Utility

  • LOAD CAPACITY 2000lbs:A-Frame Trailer jack has swivel plate double reinforcement. Gets rid of the hassle of hitching, making it easy to lift, level and adjust..
  • SWIVEL TRAILER JACK SIZE:Travel lift: 10.5" and Height range: 25"-35.4"..
  • LABOR-SAVING HANDLE:Boat trailer jack with handle bolt-on installation. 1/2" swivel pull pin. Tongue jack quality and sturdy can be used for 10-year. Don't worry about rustinghigh..
  • WIDE APPLICATION:All kinds of boat trailer, Swing-Back Boat, RV. Mounted on 3" x 5" trailer frame, 2" tongue trailer..
  • DUAL WHEELS: 360° swirl, diameter: 8", providing greater stability and mobility. Trailer jack fits any sand better soft ground roll, no sinking..
Check Stock

TYT 2000lbs Boat Trailer Jack, Heavy Duty Swivel Trailer Jack with 6 Inch Dual Wheels, 12 inches Lift, Zinc-Plated Finish for Boat, RV, Trailer, Camper

  • 【Efficient and Durable Trailer Jack】: Featuring dual sturdy 6-inch poly wheels and a heavy-duty steel construction, this trailer jack can lift up to 2000 lbs with ease. The outer tube has a diameter of 2.5 inches and can provide a maximum lifting height of 12 inches, making it a perfect fit for most trailer tongues. The package size is 65cm*17cm*17cm, with a weight of only 8.35 kg..
  • 【Bolt-On Mounting Hardware】: This trailer jack comes with bolt-on mounting hardware, making it easy to attach to the trailer tongue. The jack capacity is 2000 lbs, ensuring that it can handle most trailer lifting needs..
  • 【Easy to Operate】: This trailer jack features a side-wind handle that allows for smooth and easy operation. The jack can be adjusted to fit specific operation requirements, with a retracted height of 26 inches and an extended height of 38 inches..
  • 【Heavy Duty Material】: Made from heavy-duty steel, this boat trailer jack provides an excellent mounting facility. It is protected with a durable zinc-plated finish, ensuring long-lasting corrosion resistance against water, dirt, road salt, and more..
Check Stock

Boat Trailer Jack,Heavy Duty Trailer Jack with 6 Inch Dual Wheels,1500 lbs Swivel Trailer Tongue Jack,Bolt-on Trailer Jacks,10\ Vertical Travel, Black

  • 【Corrosion Resistant Finish&Bearing Capacity】Boat Trailer Jack body is made of high quality black powder-coat corrosion-resistant steel,Zinc finish on the rest.Overall heavy-duty steel structure, reliable strength, long-lasting corrosion resistance.Features 1500 pound bearing capacity..
  • 【Adjustable Height&Easy to Operate】 This trailer tongue jack allows 10 inches of vertical movement (12.6 inches retracted height, 22.6inches extended height).The ergonomic hand crank handle is easy to grasp and comfortable to hold,which allows you to easily swing jack in place,The height of the whole dual wheel jack will can be stretchable from 24.8inch to 34.8inch..
  • 【Double Wheel Design】 For easier coupling and positioning of your boat trailer,each boat trailer jack is equipped with 6inch diameter double wheel at the base, can rotate 360 degrees,giving your trailer enhanced maneuverability without requiring you to fully lift up the trailer tongue.Compared with most wheels on the market, dual wheel trailer jack wheel replacement is stronger and more stable..
  • 【Swivel Plate & Pull Pin Design】 For increased safety while towing and ease of use, this trailer jack stand is equipped with a swivel bracket,can 360° swivel.the jack swings up and out of the way for....
Check Stock

GBL - 6'' Metal Casters Wheels with 2 Breaks + Screws - up to 2820Lbs - Set of 4 Heavy Duty Steel Castor Wheels - Industrial Dolly Wheels for Tool Box, Workbench & Garage

  • ...hat wouldn't allow it to get stuck by hair, crumbs and grit. The pack comes with 2 swivel casters with brakes & 2 swivel castor wheels without brakes..
  • MULTIPLE USE: These Caster Wheels are ideal for a huge variety of uses DIY to industrial applications workbench, trailer, workshop, shop cabinet, toolbox, scaffold, desk, Shelves, Pallet rack, Portable flatbed, manufacturing stand, rolling box storage, heavy machine shop utility tools..
Check Stock

BISupply Tandem Wheel Ramp – 5.5in Tire Lift Trailer Wheel Jack RV Flat Tire Ramp, Concave Portable Ramp, 1 Pack

  • TRAILER TIRE CHANGING RAMPS: Use the BISupply Tandem Tire Changing Ramp to lift your vehicle so you can easily change a tire on a tandem axle vehicle by yourself without having to empty your trailer.
  • These lightweight, high-traction trailer axle jack ramps evenly distribute vehicle weight to protect the integrity of your tires and are ideal for heavy loads.
  • Can be used on double-axle car, truck, van, or trailer wheels or can be used for storing standard single axle vehicles.
  • PERFECT SIZE FOR YOUR NEEDS: These utility trailer jack tire ramps are designed to lift tandem axle vehicles with ease and security.
  • 7 inch (17.8 cm) tall van ramp provides a 5.5 inch (14 cm) concaved lift and has a total length of 24 inches (61 cm).
  • With an 8-inch (20.3 cm) width base and a 10 ton (20,000 lb.) lifting capacity per drive on jack ramp, you will be ready for anything.
  • Each package includes (1) trailer tire change ramp.
  • EASILY CHANGE YOUR VEHICLE TIRES: Place the quick jack trailer lift jack ramps on a flat surface in front or behind the good wheel.
  • Slowly drive the good wheel onto the trailer tire ramp then replace the flat tire.
  • Drive trailer off of the RV tire changing ramp and tighten lug nuts.
  • CONCAVE RAMPS PROTECT YOUR TIRES: Whether you are storing you....
Check Stock

SUNEX 66037 3.5T FLOOR JACK STEEL RAPID RISE

  • Rapid Rise Technology with dual pump pistons raises the saddle to maximum height in only six pump strokes..
  • Overload and bypass safety valves prevent the jack from being used beyond its rated capacity and over extension of the ram..
  • Strong chassis with upper and lower frame flanges to withstand twisting..
  • Wide front wheels and ball bearing mounted rear caster wheels for stability and easy maneuverability..
  • Angular positioned pump pistons provide maximum effective pump stroke when jack is completely under a vehicle..
Check Stock

Bolt- On Swivel Tongue Jack 6' Iron Core Wheel, Trailer Jockey Wheel 1200lb,10' Lift for Boat Rv Travel and Camper, Casters Can Locked (Size : 6in wheel/1200lb)

  • LIFTING ABILITY:Bolt- On Swivel Tongue Jack, 1200 lbs. capacity, with an additional 10" of travel and 10' lifting. Durable 6in removable cast iron wheels。.
  • HEAVY DUTY SWIVEL MECHANISM: heavy duty trailer jack pull pin activates the swivel mechanism, allowing you to swing the jack up and out of the way when not in use. Makes It Easy to Lift, Level, and Adjust..
  • BOLT- ON INSTALLATION: Equipped with mounting bolts, to mount up to a 3" x 5" Trailer Tongue Jack frame.
  • HIGH- QUALITY MATERIAL: trailer jack, the main body steel galvanized surface rust- proof design, After 72 hours of salt spray test,Corrosion- resistant zinc finish prevents rust even in the harshest environment..
  • WIDE RANGE OF USE: Telescopic Jockey Wheel lifts and lowers your boat or recreational trailer, The foldable design is convenient for driving and parking, and it is widely used for supporting various boat trailers, yacht trailers, RV campers..
Check Stock

WEIZE Trailer Jack Heavy Duty Swivel Boat Trailer Jack with Dual Wheels 10 Lift 1500 lbs

  • Weize trailer jack supports, lifts and lowers your boat or recreational trailer, lift capacity: 1500 lbs, 25-1/2" to 35-1/2".
  • Bolt-on installation - Fit for Mounting Plate width 4" to 5"(no more than the length of the bolt size M10*110MM) and vertically 4" height(3 holes for you to adjust, it is 2inch, 2 - 3inch, 3 - 4inch)..
  • Corrosion-resistant zinc finish prevents rust even in the harshest environment..
  • 6” diameter x 2" wide dual wheels provide support, stability and simple maneuverability..
  • The marine jack has a convenient handle which allows you to easily swing jack in place, pivot up to stow parallel to trailer tongue for travel, move back into upright position for use..
Check Stock

Rophor Trailer Jack Block New Version RV Camper Blocks for Travel Trailer 5th Wheels and More Up to 15,000 lbs Use for Any Tongue Jack Post Foot 5th Hydraulic Jack or Scissor Stabilizer

  • 【All-in-One Function】: Supports nearly any tongue jack foot, wheel jacks, 9” round 5th wheels hydraulic jack foot or Scissor Stabilizer and more! ELIMINATES NEARLY ALL MOVEMENT AND SWAY in parked RV's and Trailers (Less Stress on Your Trailer)..
  • 【Measurement】: About 6.3" tall, L:11.2", W:8.9" at base, L:9.8", W:7.5" at top (12" tall when double-stacked), recessed post-hole is 2-1/2" diameter. Top accommodates 9” round 5th wheels jack foot..
  • 【New Upgraded】: Compared with others All-in-one Trailer Jack Block, we have upgraded the internal structure and the load-bearing capacity has been increased by 50%, extremely strong and durable. This is a very important security guarantee!.
  • 【Heavy Duty Construction】: Rophor RV trailer jack blocks are built with a high-performance polymer for years of rugged use. Resists dirt, grime and oil. Rated at 15,000 lbs per block..
  • 【Why Choose Us】: Rophor specializes in the production of various RV accessories. 100% of the products have been rigorously tested to ensure that each product received by our user can work perfectly. Won’t sacrifice the quality for the price, we provide 5 years of worry-free maintenance, and look forward to your letter..
Check Stock

CURT 28912 6-Inch Replacement Boat Trailer Jack Wheel, BLACK PLASTIC

  • Replacement caster wheel with bolt and bushing.
Check Stock

Kohree Electric Trailer Jack 3700lbs, Heavy Duty RV Electric Power Tongue Jack Max 4000lbs for Travel Trailer A-Frame Camper, with Drop Leg & Weatherproof Jack Cover, 22" Lift, 12V DC Black

  • 【MAX. CAPACITY 4000LBS TESTED】Built in 12V DC electric gear motor of a low maintenance, Kohree power tongue jack helps you lift trailer stably UP TO 4000LBS..
  • 【SAVING ENERGY & 50% TIME】Just push the button of the rv electric jack to raise or lower any A-frame trailer automatically more quickly. It takes 47s to lift 8 inches, compared to 84s for other products. Without harsh sound & easier than hand cranking. No longer annoyed by sore arms and shoulders..
  • 【ADJUSTABLE HEIGHT】Adjustable 5 gear drop leg make 12V trailer jack increase 8" height to meet the different lifting needs. Max extended height is 22” lift, fully retracted in 9"..
  • 【SAFE OPERATION】With 2 LED lights for convenient and safe night time hookup, the camper jack also has a built-in circuit breaker. If in accident, it will disconnect automatically & reconnect about 2 mins later..
  • 【WIDE APPLICATION】The electric tongue jack is made of heavy-duty steel with anti-rust coating on the outside, and equipped with a hand crank & Weatherproof Jack Cover, great for rv, 5th wheels, any ....
Check Stock