Top Triple Feed Patch Antenna

OxGord Outdoor Water Resistant Cover for Scooters

Solar-Tech Reflective - Breathable Polyester Material Allowing Moisture Trapped within to Escape.
Reinforced Seams - Breathability - Front and Rear Elastic Hems Draw Strings - To Ensure a Snug Semi Glove Fit.
Includes Tie down grommets for added security against high winds - storage pouch and antenna patch included.

Breathable Polyester Material Allowing Moisture Trapped within to Escape.
Reinforced Seams - Breathability - Front and Rear Elastic Hems Draw Strings - To Ensure a Snug Semi Glove Fit.
Includes Tie down grommets for added security against high winds - storage pouch and antenna patch included.

72-channel M8 engine GPS L1C/A, SBAS L1C/A, QZSS L1C/A, QZSS L1 SAIF, GLONASS L1OF, Galileo E1B/C.
On-board Ultra low noise 3.3V voltage regulator and RF filter for noise blocking.
Features an additional front-end LNA for optimized performance and a front-end SAW filter for increased jamming immunity.
Build-in embedded GNSS patch antenna, low power consumption.
The 15×15 mm patch antenna provides the best compromise between the performance of a Right Hand Circular Polarized (RHCP) antenna and a small size to be integrated in any design..

Superior performance aluminum die cast grid UV stable light Gray powder coat finish All weather operation easy to assemble.
Frequency range: 24002483MHz gain: 23. 50. 5dBi VSWR: 30 max Input power: 200W.
Rf connector: n-type Female survival Wind speed: 148mile/hrs temperature: -40c+80c humidity: 100%at25c.
Antenna weight grid antenna: 3. 5lbs antenna+feed antenna: 4. 1lbs Package weight net 5. 2lbs. Gross: 6. 2lbs antenna dimensions: 60cm x 106 cm (hxw).

72-channel M8 engine GPS L1C/A, SBAS L1C/A, QZSS L1C/A, QZSS L1 SAIF, GLONASS L1OF, Galileo E1B/C.
On-board Ultra low noise 3.3V voltage regulator and RF filter for noise blocking.
Features an additional front-end LNA for optimized performance and a front-end SAW filter for increased jamming immunity.
Build-in embedded GNSS patch antenna, low power consumption.
The 15 x 15 mm patch antenna provides the best compromise between the performance of a Right Hand Circular Polarized (RHCP) antenna and a small size to be integrated in any design..

High Transmission Efficiency: The center frequency of the antenna is 5.8GHz, the signal transmission is better, and the radiation efficiency is....
PCB Double Panel: The antenna is made of PCB, 1.6mm thick double panel, and the whole process is sprayed with tin to ensure good passing performance....
Good Axial Ratio: The antenna has a good axial ratio, not only directly perpendicular to the patch, but also off-center..
Easy to Use: The antenna is easy to manufacture and has high precision, even for amateurs..
Professional Application: This is a pagoda antenna suitable for drones and goggles..

HIGH QUALITY-- This Antenna Analyzer adopts black case would protect the antenna analyzer from external damage, durable in use..
CONVENIENT OPERATION-- 5 operation buttons are easy and convenient to operate. You can selects operation mode, band and extended functions..
FEATURE-- The antenna tester is Powered by DC 12 to 14V 500mA external power with 2.1mm power jack(center pin positive), just connect the power and....
WIDE MEASUREMENT RANGE-- SWR usable measurement range of this analyzer is 1.0 to 9.99. step size: user configurable increments of 100Hz, 1KHz, 10KHz,....
APPLICATION-- Measure antenna electrical parameters: SWR, impedance (resistance + reactance), capacitance, inductance. It can measure feed-point....

This 5.8GHz Left Hand Circularly Polarized patch antenna was custom-designed, with no expense spared, for the FPV market. Light enough to be mounted directly onto an LCD headset, or directly onto the front of one of our Uno, or Duo receivers..
This antenna will breathe new life into the CE-Legal 25mW systems, allowing multi-km range with ease. For 600mW systems, its time to start worrying about the range of the control link, since with a combination of this antenna, and a spiroNET omni, the video range can greatly exceed the control range of most 2.4GHz radios..
Precision manufactured with very tight tolerances and 100% tested on a professional antenna tester (Rhode & Schwartz) to ensure maximum range and performance..
F/B ratio is 26dB, VSWR is < 1.5:1 (5740 - 5860MHz). Impedence is 50 ohms..
SMA connector compatible with all FatShark/ImmersionRC 5.8GHz products.

This is a hidden built-in mini car radio patch antenna, compatible with vehicle truck SUV marine boat audio radio stereo receiver player amplifier.
The AM FM radio antenna is designed for improving signal strength, reducing noise, getting more stable and clearer reception information. Small and sleek, easy to assemble.
The replacement radio antenna commonly be used for car stereo receiver media head units such as Alpine, JVC, Jensen, Kenwood, Pyle, Pioneer, Sony and so on.
Material of Antenna: non-toxic ABS Plastic.
Feature: Car Windshield Window Glass Adhesive Mounting.
Working frequency: FM 80MHz-108MHz, AM 520KHz-1710KHz.
Antenna Connector type: Motorola DIN plug connector. Cable length: about 10 feet / 3 meter.
Each Package include: 1x car radio antenna.