Top Tungsten Carbide Saw Tips

Overpeak 10-Inch Table Saw Blade ATB Ultra Fine Finishing 90 Teeth Wood Cutting Circular Saw Blades

  • ▲Material – OVERPEAK saw blades made of tougher tungsten carbide for up to 5x longer cutting life than other saw blades.
  • ▲Low Noise & Cutting Stable – 6 Laser cut expansion slots and 4 Laser-cut stabilizer vents trap noise and vibration, keeping it cool and reducing blade warp.
  • ▲Alternate-Top Bevel Teeth – The 10 inch saw blade with unique tooth design provides straight cuts and cutting smoother.
  • ▲Machine Use – Framing saw blade is great for circular saw, table saw, miter saw. RPM up to 6000.
  • ▲General Usage – The Overpeak 10 inch carbide blade is 90 tooth and suitable for ripping wood, crosscuts wood, plywood, and laminate.
Check Stock

Tenryu 10In X 50T Atbr Table Saw Blade

  • ATAF (Alternate Top Alternate Face) Extra sharp cutting tips reduce load on saw. Face beveling diverts cutting load left and right, instead of straight on. Creates a better shearing action - especially in cross-grains, natural wood..
  • Fully hardened, expertly tensioned tool steel bodies absorb impact, remain flat and true, and resist excess heat build-up..
  • High-grade, C-3, fine-grain tungsten carbide tips resist erosion for extended blade life..
  • Aggressive rake angles for maximum cutting speed and efficiency..
  • Each tip is precision honed on all four exposed surfaces. This minimizes micro-chipping along the sharp edge of the blade and results in a sharper, longer-lasting edge..
Check Stock

Chainsaw Sharpening Jig Chain Saw Sharpener Tool with 5 Pcs Tungsten Carbide Chainsaw Sharpener Bits Hand-Cranked Chainsaw Chain Sharpening Jig Kit for 4 -22 Chain Saws Keep Chain Saw Sharp

  • ...chain. It enables the chainsaw sharpener bit to be positioned accurately and horizontally on the chainsaw teeth, ensuring that each tooth can be sharpened evenly. It is a portable manual chainsaw sharpener, easy to sharpen chain saw.
  • Wear-resistant Chainsaw Sharpener Bit: The chainsaw sharpening jig kit include 5Pcs tungsten carbide chainsaw sharpener bits. This chain saw sharpening bits can be used not only with the hand crank, but also with the electric drill, and its wear-resistant is good. The "tungsten carbide coating" of chainsaw sharpener bit is hardly fall off after repeated use, and it still maintains the original diameter. So,no need to replace the chainsaw sharpening bits frequently..
  • Perfect Chainsaw Sharpening Jig Kit: The chain saw sharpener kit including 1* stainless steel alloy chain saw sharpening jig + 5* tungsten carbide chainsaw sharpener bit + 1* instructions + 1* clean brush (extend the life of the chain) ​+ 1* gloves (protect hands) + 1* tool bag (easy to store and carry). This chainsaw sharpener jig suitable for all kinds of chain saws, 2 * ∅3mm chainsaw sharpener bits suitable for 4"-6" chain saws, 3 * ∅5mm chainsaw sharpener bits suitable for 8"-22" chain saws.
  • Portable Chainsaw Chain Sharpening Jig: This manual chainsaw ....
Check Stock

3Pack 4-1/2-Inch 40T TCT Circular Saw Blade with 7/8-Inch Arbor, Carbide Tipped Teeth General Purpose Hard & Soft Wood Cutting Saw Blade for Angle Grinder

  • DURABLE: OA-BRES circular saw blades are made of durable premium alloy steel material, with hardened and sharper construction-grade tungsten carbide teeth for effective woodworking. Fully Polished and Chrome Plated Surface provides a long-lasting usage life..
  • EFFECTIVE: Sharp saw blade cutters with thin kerf ensure smooth, fast and accurate cutting with impressive results..
  • Arbor size:7/8inch(22.23mm) with reduce ring 5/8inch(16mm).
  • Carbide Teeth: 40. Perfect choice for a circular saw, miter saw, table saw when needed for ripping and crosscutting. MAX RPM up to 13,500..
  • APPLICATING: General purpose Hard & Soft wood cutting saw blade. for long-lasting cuts in wood, plastic, and composite materials..
  • WHAT YOU GET: 3 Pack 4-1/2-Inch 40T TCT Carbide-Tipped Circular Saw Blade. The saw blades can be used with Angle Grinder, Circular Saw, Miter Saw, Table Saw, Radial Arm Saw, and more..
Check Stock

Chain Saw Sharpening Jig, Chain Saw Sharpener Tool with 5Pcs Tungsten Carbide Chainsaw Sharpener Bits, Portable Manual Chainsaw Chain Sharpening Jig Kit for 4"-22" Chain Saws, Keep Chain Saw Sharp

  • ...chain. It enables the chainsaw sharpener bit to be positioned accurately and horizontally on the chainsaw teeth, ensuring that each tooth can be sharpened evenly. It is a portable manual chainsaw sharpener, easy to sharpen chain saw.
  • Wear-resistant Chainsaw Sharpener Bit: The chainsaw sharpening jig kit include 5Pcs tungsten carbide chainsaw sharpener bits. This chain saw sharpening bits can be used not only with the hand crank, but also with the electric drill, and its wear-resistant is good. The "tungsten carbide coating" of chainsaw sharpener bit is hardly fall off after repeated use, and it still maintains the original diameter. So, there is no need to replace the chainsaw sharpening bits frequently, Save Money..
  • Perfect Chainsaw Sharpening Jig Kit: The chain saw sharpener kit including 1* stainless steel alloy chain saw sharpening jig + 5* tungsten carbide chainsaw sharpener bit + 1* instructions + 1* clean brush (extend the life of the chain) ​+ 1* gloves (protect hands) + 1* tool bag (easy to store and carry). This chainsaw sharpener jig suitable for all kinds of chain saws, 2 * ∅3mm chainsaw sharpener bits suitable for 4"-6" chain saws, 3 * ∅5mm chainsaw sharpener bits suitable for 8"-22" chain saws.
  • Portable Chainsaw Chain Sharpening Jig:....
Check Stock

Mollom Heavy Duty Carbide Hole Saw, Hole Cutter cuts Stainless Steel, mild Steel, Iron, Copper, Brass, Plastic ( 3'' 76mm )

  • ✔️┋【More Teeth】Includes 15 teeth for faster cutting and more teeth than other brands..
  • ✔️┋【Dimension】Cutting Dia: 3'' | 76mm.
  • ✔️┋【Extremely Long Life】Carbide hole saw last 10X Long Life over standard bi-metal hole saw, and even can bore up to 0.1 inch thick stainless steel..
  • ✔️┋【High Quality Material】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable..
  • ✔️┋【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
  • ✔️️┋【Perfect Cutting】The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..
Check Stock

10pcs SDS Plus Concrete Hole Saw Kit Extension Shank Mansonry Cement Wall Drill Bit TCT Core Drill Set Tungsten Hole Cutter for Drilling Brick Concrete Cement Stone

  • [What You Will Get]: 35mm, 40mm, 50mm, 65mm, 82mm and 110mm core drill bits, SDS+ arbors, pilot drills and a 300mm SDS+ extension shank.
  • [Tungsten Carbide Tip Drill]: This top-of-the-line TCT (tungsten carbide tip) core set offers faster cutting speeds and longer service life, making....
  • [Technical Application]: 35mm-45mm hole saw extension concrete cement wall drill bit for drilling water pipe and heating pipe, 55mm-80mm drill for air....
  • [Durable Material]: This sds plus extension shank hole saw drill bits for concrete cement is very solid, using high-quality alloy welding, for the....
  • [Widely Used]: This masonry hole saw kit easily drills holes on common wall materials, such as brick, adobe, concrete, cement, and stone, widely used....
Check Stock

Mollom Heavy Duty Carbide Hole Saw, Hole Cutter cuts Stainless Steel, mild Steel, Iron, Copper, Brass, Plastic ( 1-3/4'' 45mm )

  • ✔️┋【More Teeth】Includes 10 teeth for faster cutting and more teeth than other brands..
  • ✔️┋【Dimension】Cutting Dia: 1-3/4'' | 45mm.
  • ✔️┋【Extremely Long Life】Carbide hole saw last 10X Long Life over standard bi-metal hole saw, and even can bore up to 0.1 inch thick stainless steel..
  • ✔️┋【High Quality Material】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable；.
  • ✔️┋【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
  • ✔️️┋【Perfect Cutting】The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..
Check Stock

Gunpla 4-1/2-inch 40 Tooth Alloy Steel TCT General Purpose Hard & Soft Wood Cutting Saw Blade with 7/8-inch Arbor(Reduce Ring 5/8 inch)

  • DURABLE MATERIAL: Gunpla circular saw blades are made of durable premium alloy steel material, with hardened and sharper tungsten carbide teeth for effective woodworking..
  • HIGH SPEED CUTTING SAW: Experience great cutting performance with this wood cutter. The saw blades ensure fast and accurate cutting with impressive results..
  • SMOOTH CUTTING: Sharp saw blade cutters, with thin kerf to provide smooth cuts. The saw blades can be used with Circular Saw, Miter Saw, Table Saw, Radial Arm Saw, and more..
  • APPLICATION: Perfect choice for a circular saw, miter saw, table saw when one is needed for ripping and crosscutting. MAX RPM up to 13,200..
  • Arbor size:7/8inch(22.23mm) with reduce ring 5/8inch(16mm).
  • Carbide Teeth: 40. Computer-balanced plate reduces vibration for improved accuracy and better finish..
Check Stock

Gunpla 3 Pieces 4-1/2-inch 40 Tooth Alloy Steel TCT General Purpose Hard & Soft Wood Cutting Saw Blade with 7/8-inch Arbor(Reduce Ring 5/8 inch)

  • DURABLE MATERIAL: Gunpla circular saw blades are made of durable premium alloy steel material, with hardened and sharper tungsten carbide teeth for effective woodworking..
  • HIGH SPEED CUTTING SAW: Experience great cutting performance with this wood cutter. The saw blades ensure fast and accurate cutting with impressive results..
  • SMOOTH CUTTING: Sharp saw blade cutters, with thin kerf to provide smooth cuts. The saw blades can be used with Circular Saw, Miter Saw, Table Saw, Radial Arm Saw, and more..
  • APPLICATION: Perfect choice for a circular saw, miter saw, table saw when one is needed for ripping and crosscutting. MAX RPM up to 13,200..
  • Arbor size:7/8inch(22.23mm) with reduce ring 5/8inch(16mm).
  • Carbide Teeth: 40. Computer-balanced plate reduces vibration for improved accuracy and better finish..
Check Stock

LENOX Tools Hole Saw, Carbide, 4-1/8-Inch (2996666CG)

  • Features a hard tungsten carbide grit cutting edge.
  • It will cut tough abrasive materials such as fiberglass, ceramic tile, laminates.
  • Carbide grit edge will not snag or chip when cutting thin materials.
Check Stock

Rocaris 13Pcs 16mm-53mm Stainless Steel Carbide Tip Metal Drill Bit Hole Saw Set

  • 【Innovative three-blade design】Designed as Three-blade for layered cutting, the Hole Saw Kit for Metal can make the cutting resistance smaller and....
  • 【Top Quality】Made of YG8 tungsten carbide steel, the Titanium-plated cemented carbide Tooth are sharp, anti-rust and durable.Ideal for hand held....
  • 【Fast Cutting】The teeth of metal hole saw kit are designed as front and rear low top tooth profile and Three-blade, which make it more efficient....
  • 【Multipurpose Tools】The carbide hole saw set are widely used in stainless steel plate, hard metal, iron, mild steel, alloy steel, aluminum, FRP,....
  • 【13 Different Size】Outside diameter Size: 16mm, 18mm, 20mm, 22mm, 25mm,26mm,28mm, 30mm, 35mm, 40mm,45mm, 50mm, 53mm.Wood can be drilled about 20mm....
Check Stock