Top Twist lock Fittings

GODESON Air Chuck Locking Air Chuck use for Tire Inflator Nozzles Pack of Clip-on and Twist-on Chucks Pack of 2pcs

  • 1. HEAVY DUTY BRASS CONSTRUCTION of tire chucks with lock on make the tire air chucks durable and Reliable..
  • 2. INTERCHANGEBALE AIR CHUCKS- including Clip-on chuck and Twist-on chuck(thread on) in 1 package. You just choose it for different using. Clip- on....
  • 3. SMART DESIGN with Large Bore of tire air chuck, Open flow through for heavy duty air chuck, while close flow through for clip-on chuck.
  • 4. UNIVERSAL CONNECT TYPE ,1/4-Inch Female NPT, 3/4-Inch Hex Air Chucks, Fits Standard 1/4" NPT Fittings.
  • Quick connect tire inflator chuck, Designed to use with Inflator and pressure gauge. LIFETIME 100% Satisfaction....
Check Stock

EVIL ENERGY 6AN to 3/8 Barb Push Lock Hose End Fitting 45 Degree Blue&Red 2PCS

  • 6AN female swivel to 3/8 barb fitting 45 Degree.
  • Please attention that AN6 push lock fitting only be worked with rubber fuel line. It can not be installed on PTFE Hose, Nylon Braided Hose, or....
  • Thread Size of 6an 45 Degree push lock fitting is 9/16-18UNF and the rubber fuel line which works with should be 3/8"..
  • Push on locking fittings are much more easier on installation than swivel and PTFE fittings. (high-pressure system not recommended).
  • EVIL ENERGY Provide plenty kind of fuel fittings, Swivel, Push-on lock, PTFE hose end and other fitting adapters..
Check Stock

LockNLube Simple 90 Coupler

  • Rated to 10,000 PSI! Locks on, stays on. Does not leak once locked on..
  • Hands free - does not pop off under pressure. Easily release from fittings with the thumb lever, even at extreme pressure..
  • Fits all standard Grease Guns - 1/8 NPT fitting. Fits all SAE and Metric Zerk fittings. Simply replace your existing coupler..
  • Over 3.5" of reach. Great for shielded PTO shafts, axles, harvester heads, U Joints and other recessed grease fittings..
  • Includes rebuild kit. Easily replace seal and jaws without replacing the coupler..
Check Stock

MSCRP Fuel Injection Line Fitting Adapter Kit EFI FI w/Filter/Regulator LS Conversion

  • 1Pc 6AN 25 feet of high-pressure fuel injection hose.
  • 1Pc 6AN to 3/8" Male Straight Filter Fittings+1Pc 6AN to 5/16" Fuel Filter Return Line Fitting.
  • 2Pcs 6AN to 3/8" Fuel Filter Feed Line Fittings+2Pcs -6AN to 1/4" NPT Fuel Pump Adapters+2Pcs 45 Degree -6AN Female to 3/8" Push Lock hose fittings.
  • 6Pcs straight -6AN Female to 3/8" Push Lock hose fittings.
Check Stock

Patio Misting Kit - 250 PSI Patio misting System - Made in USA Pump - Up to 40 Nozzles Misting System - for Residential Misting System - Stainless Steel Misting Nozzles (10 Nozzle System)

  • {SYSTEM COMPONENTS} Base 10 Nozzle Mist Kit Includes: 1- 250 psi mid pressure pump with built-in solenoid and filtration.
  • 10- cleanable brass/stainless steel Nozzles (0.012").
  • Mounting Clamps and all necessary fittings required for easy D-I-Y installation.
  • {MADE IN USA PUMP} Whisper quiet operation Built in Solenoid Valve.
  • Outdoor Enclosure Wall Mountable Enclosure Max Pump Pressure 250 Psi 110v AC (Available in 12vdc and 220v on request) Supports up to 30 nozzles Cleanable Brass-Stainless Steel ultrafine misting nozzles Reusable push lock fittings.
  • {APPLICATIONS) Residential Misting, Industrial Cooling, Warehouse Misting, Outdoor Restaurant.
  • {FITTINGS FEATURES} Fittings are Brass /Nickel Plated Fittings - to Make your Misting System more durable.
  • {SUPPORT} 24/7 Support from mistcooling Texas. MC12080-MC12092.
Check Stock

In-Ground Sprinkler System with Hose Watering Timer

  • EVERYTHING YOU NEED: Kit contains digital timer, 6 high-efficiency sprinklers, Blu-Lock tubing and fittings, tubing cutter, and 200 lb. pressure gauge.
  • FAST AND EASY INSTALLATION: Blu-Lock has reduced required insertion force by half of traditional barb fittings, making installations faster and easier on your hands.
  • PUSH-ON QUICK-RELEASE FITTINGS: Blu-Lock quick-release collars allow for easy removal, yet the stronger the water pressure, the more the retaining rings grip the pipe to ensure against leaks.
  • ENVIRONMENTALLY FRIENDLY: Blu-Lock requires no glue or plumbers tape, protecting the environment from harmful chemicals used with traditional PVC fittings.
  • CONSERVE WATER: The timer features rain delay so you arent watering in the rain.
  • FLEXIBLE PROGRAMMING: A run time of 1-240 minutes, with intervals from every 6 hours to once every 7 days.
  • AREA COVERAGE: Ideal for medium to medium-large area coverage from 2,300-6,900 sq. ft. with average residential water pressure and flow.
  • ADJUSTABLE DISTANCE: Easy to adjust spray distance for each sprinkler from 15-25 ft. radius.
  • PART OR FULL CIRCLE: Simple to adjust from 40 to 360 degrees while the water is on or off.
  • TOOLS INCLUDED: Test water pressure before installation with the included 200 lb. gauge to ensure system....
Check Stock

Valterra 2101X PVC Gate Valve, White, 1-1/2\ Inner Diameter, 1.9\ Outer Diameter Unibody Valve, Slip w/ Gate Keeper

  • APPLICATIONS: Ideal for quick opening and shut off in vacuum or pressure applications - Can be used with air or clean water up to 75 PSI.
  • KEY FEATURES: Unrestricted flow - Full Port - Simple push pull operation - Twist lock closure & Gate Keeper to hold open - Solvent traps help keep solvent out of seal area.
  • SPECIFICATIONS: Working pressure of 75 PSI in both open and closed postions - Sch 40 PVC with female Slip/Hub fittings - All materials resist corrosion and mild chemicals.
  • REPAIRS: Non-repairable body - Handle is threaded for easy replacement.
Check Stock

Grease Gun Coupler, Locks onto Metric and SAE Zerk Grease Fittings, Positive Lock, Fits All 1/8” NPT Type Grease Guns, Quick Disconnect Lever, 10,000 PSI High Pressure, by Tech Team

  • Positive locking quick disconnect for secure attachment and easy release of zerk fittings..
  • The grease gun coupler allows you to put grease into zerks that are difficult to get at and includes an 8” high pressure hose for reaching into tight areas. Flex tube for increased reach..
  • The coupler has a 1/8” NPT thread that is compatible with all types of grease guns manual, electric, and pneumatic..
  • Zerk fittings included to replace clogged, broken, or damaged fittings..
  • Includes one (1) positive lock quick disconnect clamp, one (1) 200 mm flex extension tube, two (2) 90-degree grease fittings, two (2) 45-degree grease fittings, two (2) straight grease fittings, one (1) precision nozzle..
Check Stock

LAOA Water Pump Pliers,V-Jaw,Tongue and Groove Pliers,7-Inch

  • Made in Taiwan,Meets DIN and ISO standards.The plier body is made of SAE1060,Constructed with oil-hardened for strength and durability..
  • V-jaw design,clear gripping teeth,Gripping surfaces fashioned with special induction-hardened teeth for low wearing and secure gripping.
  • Pliers wrench 7 inch,185mm total length,42mm Max gripping scope.The groove pliers tool can grip flat, round, hexagonal, and square pieces firmly..
  • Pressing PUSH nuts and sliding handle to control the size of opening.Self-locking on pipes and nuts,no slipping on the workpiece.Apply to bolts, and pipes or to clamp, grip, and twist various fasteners and fittings..
  • Ergonomic handle design,with double plastic covered makes conmfortable hand feeling..
Check Stock

mistcooling 160PSI Misting Pump (220 V-AC)

  • Specs: 160 PSI Mist Pump - 160psi Pump Quiet operation 35DB - self priming - max pressure 200psi pump - Available in 110 V, 220 V & 12 VDC - Thermal Safety Switch - Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps I DON’T THINK THIS BELONGS WITH THIS PUMP - Standard pump inlet: 3/8 inch push lock Fitting. - Standard Pump outlet: ¼ inch Push- lock fitting..
  • Nozzles - Nickel-plated brass button series - With stainless-steel Orifice - Standard 10/24 inch thread - 0.012 inch Orifice - Rust-resistant fixed impeller pin - 0.014 GPM Flow per Nozzle..
  • Fittings - ¼ inch OD - Push to Connect Fittings - Easily Re-Usable - Black Color Fittings - 10/24 Thread Size - Leak Proof Fittings..
  • Tubing - ¼ inch OD Flexible PE Tubing - Max burst pressure is 300psi at 75 degree F - UV Resistant Flexible Tubing - Black Color - UV Treated..
Check Stock

Utah Pneumatic Dot Air Fittings Tee Union 1/4”Od 1/4” Npt Air Push Fittings Male Female brake tube fittings Push In Fitting D.O.T Approved For Sae Brake Line fittings Applications Pack Of 2

  • Typical application: Air brake systems push dot fittings pneumatic fittings brass air brake fittings dot air line fittings.
  • Maximum operating pressure of 150 psi dot air brake fittings air line fittings 1/4 dot push union dot compliant air line fittings.
  • Temperature Range:_65°F to +250°F-40°C to +93°C push-to-connect fittings ptc air fittings push lock fittings.
  • Material:CA360 ,CA377 brass push air fittings tee brass fitting airline tee fitting air fittings 1/4 dot.
Check Stock

Kegco 5 Gallon Ball Lock Keg - RubberHandle

  • ...p handle that makes it easy to carry and stack, making it ideal for smaller breweries and home brewers with limited available storage space. The keg has a stainless steel lid that fastens tightly to the body and features an integrated pressure release valve that allows you to easily depressurize the keg..
  • BALL LOCK FITTINGS: This ball lock Cornelius Pepsi home brew beer keg features ball lock fittings that are designed for use with ball lock keg couplers. The ball lock fittings can be easily accessed to make cleaning and maintenance fast and simple..
  • KEG DIMENSIONS: The keg measures 25″ tall and 8.5″ in diameter..
Check Stock