Top Universal Fit Flush Valve Kit

HTDAK 12 Inch (About 30cm) Toilet Fill Valve Silent Toilet Repair Water Saving Dual Flush Fittings Silent Split Toilet Valve Top Button Replacement Assembly

  • Toilet flush valve: for split toilets with top button, button hole diameter 3.8cm, drain hole diameter 6cm-7cm, measured tank height: 27cm-34cm, with tank cover height: 32cm-40cm.
  • Toilet filling valve: for toilets with bottom inlet, installation thread G15/16, adjustable range according to different tank heights: 27cm-34cm..
  • The double flush valve of the toilet can adjust the water level up and down to achieve full flush or half flush, and save water by adjusting the flush volume to reduce unnecessary expenses..
  • The toilet replacement valve kit is made of stainless steel, high-density carbon particle rubber, and high-quality silica gel: it has anti-corrosion, wear-resistant, rust-proof, leak-proof and other properties, and is suitable for operation under various water pressures and water quality..
  • The universal toilet replacement valve body is simple in structure, easy to replace, and only takes 10 minutes to install. It is easy to clean and maintain, so that your toilet components can continue to run smoothly..
Check Stock

Fluidmaster 400AKRP10 400AKR Universal All in One Toilet Repair Kit, 2 inches, Easy Install

  • RESTORES OVERALL TOILET PERFORMANCE: All in one toilet repair kit replaces inefficient fill and flush valves, leaky flappers, and broken toilet handles to make your toilet run like new..
  • UNIVERSAL DESIGN: 400A toilet fill valve adjusts easily from 9 – 14 inches, fits most 2-inch flush valve toilets, and is ideal for use in 1.6 to 3.5 gallons per flush toilets or larger.
  • HIGH PERFORMANCE FLAPPER: PerforMAX high performance 2-inch adjustable water-saving toilet flapper maximizes water usage with each flush.
  • EASY INSTALLATION: Easily installs in 10 minutes or less to get your toilet flushing like new again.
Check Stock

Fluidmaster 400CR Universal Toilet Fill Flapper Repair Kit for 2-Inch Flush Valves, 1-Pack, Multicolor

  • FIXES NOISY, RUNNING TOILETS: Toilet repair kit replaces inefficient fill and flush valves, and leaky flappers to help solve most common toilet fill problems.
  • UNIVERSAL DESIGN: 400A toilet fill valve adjusts easily from 9 – 14 inches, fits most 2-inch flush valve toilets, and is ideal for use in 1.6 to 3.5 gallons per flush toilets or larger. Dual Flush: No.
  • CORROSION RESISTANT: Solid frame 501 2-inch flapper features corrosion-resistant Microban material to prevent breakdown and leaks due to bacteria and is chlorine and hard water resistant.
  • EASY INSTALLATION: Easily installs in 10 minutes or less to get your toilet flushing like new again.
Check Stock

Funmit 385314349 RV Water Valve Kit Replacement for Dometic & Sealand & Vacuflush Pedal Flush Toilets, Premium Performance in Prevention of Leakage

  • ★【PERFECT DESIGN】: The rv toilet valve is compatible with Dometic, Sealand, Traveler and VacuFlush pedal-flush toilet.
  • ★【APPLICABLE MODELS】: The rv toilet valve kit 385314349 perfect fit for Dometic and Sealand models as follows: ➤506+, 510+, 511 H, 547+, 548+, 706, 709, 748, 749, 806, 808, 847, 848, 1147, 1148, 2010, 2011, 5006, 5047, 5048, 5049.
  • ➤VacuFlush model 168, 606, 647, 648, 1006, 1008, 1047, 1048, 1049, 1106, 5146.
  • ★【COMPLETE KIT FOR EASY INSTALLATION】: The rv flush valve has 1 set of 385314349 rv toilet water valve kit contains 1 RV toilet water valve, 2 new mounting screws and 2 stainless mesh filters for quick and easy fix.
  • ★ 【LEAKPROOF DESIGN】: The 385314349 rv water valve kit allows you to fix your sticking valve and solve the overflow problem due to freezing and cracking. If your toilet water is too large, the kit will help prevent leaking toilet, lead-free brass cap means no leaks, seals and connectors on the valve ensures watertight.
  • ★【100% WARRANTY】: The sealand rv toilet parts come with a 90 day manufacturer limited warranty back by Funmit, you can feel a 100% confident buy and enjoy a 24 hours pro tech online help any time.
Check Stock

Fluidmaster 507A 2-Inch Universal Toilet Flush Valve And Flapper Replacement

  • FIXES NOISY, RUNNING TOILETS: Toilet repair kit replaces inefficient fill and flush valves, and leaky flappers to help solve most common toilet fill....
  • UNIVERSAL DESIGN: 400A toilet fill valve adjusts easily from 9 – 14 inches, fits most 2-inch flush valve toilets, and is ideal for use in 1.6 to 3.5....
  • CORROSION RESISTANT: Solid frame 501 2-inch flapper features corrosion-resistant Microban material to prevent breakdown and leaks due to bacteria and....
  • EASY INSTALLATION: Easily installs in 10 minutes or less to get your toilet flushing like new again.
Check Stock

Korky 4010PK Universal Complete Toilet Repair - Stops Running Leaking Noisy Toilets - Easy to Install - Made in USA, 10-1/4' x 6-3/8' x 3-1/2'

  • TOILET REPAIR KIT: Allows for a full overhaul of your toilet & is designed to fix no/slow refilling, running & noisy toilets. It has a universal design to fit all brands & features a wide range of adjustability..
  • FIX RUNNING TOILETS: The easy to install 4010 includes fill valve, flapper, refill tube, metal refill tube, hardware, flush valve, bowl gasket & instructions. No hack saw required..
  • LONG LASTING CHLORAZONE red rubber resists chlorine, bacteria, city water treatment, hard & well water..
  • WHY KORKY: Our high quality toilet products are universal & specific to both older & modern toilet models. Our repair parts are easy to install & made exclusively from long lasting chlorazone red rubber..
  • REPLACEMENT TOILET PARTS: Try Korky Toilet Repair because we continue to commit to designing toilet repair parts that are unviersal to fit the majority of toilets. Designed & manufactured in Wisconsin..
Check Stock

Toilet Economizer Dragon de Agua | 40% EcoFriendly Water Saver

  • WATER-SAVING DUAL FLUSH TOILET REPAIR KIT: Converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. The HYR451T combines two products that together will increase your toilet’s efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve.
  • COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE WITH MANSFIELD TOILETS..
  • FLUSH VALVE REPLACeMENT INSTALLATION TIP: Be sure to place the Dual Flush Converter directly in the center of your existing flush valve.
  • IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flush valve from toilet tank.
  • the Dual Flush Converter is a replacement to the existing flapper.
  • slide the blue silicone dome gasket down the overflow tube, seating the gasket into the flush valve.
  • ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain.
  • the permafit silicone seal is also chlorine and chemical resistant and will not warp.
Check Stock

DANCO GB-1 Ceramic Catridge for Aquasource and Glacier Bay Single-Handle Faucets Ceramic Blue 1-Pack 89902

  • FIXES NOISY, RUNNING TOILETS: Toilet repair kit replaces inefficient fill and flush valves, and leaky flappers to help solve most common toilet fill....
  • UNIVERSAL DESIGN: 400A toilet fill valve adjusts easily from 9 – 14 inches, fits most 2-inch flush valve toilets, and is ideal for use in 1.6 to 3.5....
  • CORROSION RESISTANT: Solid frame 501 2-inch flapper features corrosion-resistant Microban material to prevent breakdown and leaks due to bacteria and....
  • EASY INSTALLATION: Easily installs in 10 minutes or less to get your toilet flushing like new again.
Check Stock

4 Packs 7301111-0070A Flush Valve Seal Kit for American Standard Toilets, Replacement Parts for Champion 4 Tank and Eljer Titan 4 Model toilets, Replace for 012611410444

  • Good replacement: the 7301111-0070a flush valve seal kit is made of quality and durable rubber, the gasket outer diameter is 4 1/4 inch, o-ring outer diameter is 9/16 inch, please confirm the size before purchasing.
  • And it can replace for part 012611410444.
  • Range of application: compatible with american standard champion 4 and Eljer Titan 4 model toilets, also compatible with other universal toilets with equivalent flush valves.
  • Package includes: you will receive 4 x 7301111-0070a flush valve seal kit, sufficient quantity for you to replace the old or damaged one and convenient for you to repair your toilet.
  • Create greater flushing power: toilet gasket seals wear out over time and need to be replaced in a timely fashion to create better flushing pressure and reduce toilet flushing noise.
  • Easy and quick installation: it will only take a few minutes for you to complete the installation follow the instruction (instruction included).
  • Warm note: This is an aftermarket replacement product (not original), the mention of brand names and any related model designation above is only for purposes of demonstrating compatibility.
Check Stock

Fluidmaster K-400H-039 High Performance Toilet Fill Valve with 2-Inch Adjustable Toilet Flapper Kit

  • The PerforMAX fill valve and 2 in. Flapper Kit is the premium solution to make your 2 in. flush valve toilet run like new.
  • PerforMAX toilet fill valve offers high performance with adjustable tank and bowl water for full water control.
  • PerforMAX Water-Saving Toilet Flapper included to save water use per flush.
  • Adjustable fill valve height to fit more tanks, corrosion resistant flapper, Solid frame for a secure seal, 7 year warranty.
Check Stock

Danco HYR451T HyrdroRight Universal Water-Saving Toilet Repair Kit with Dual Flush Valve, Lever Handle, White

  • WATER-SAVING DUAL FLUSH TOILET REPAIR KIT: Easily converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. The permafit silicone seal is also chlorine and chemical resistant and will not warp..
  • ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain..
  • DUAL-FLUSH LIGHT-TOUCH LEVER UNIQUE SPLIT HANDLE DESIGN: The short center lever is the Quick Flush setting that uses significantly lower water volumes for liquids and paper – this setting is needed 4 out of 5 times. The second complete push lever at end is the Full Flush that uses the normal amount of water for solids..
  • COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE WITH MANSFIELD TOILETS. The HYR451T combines two products that together will increase your toilet's efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve..
  • HASSLE-FREE INSTALLATION: Drop-in installation without tools in 5 to 10 minutes - tank removal not required..
  • IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flush....
Check Stock

Danco HYR460 Hydroright HyrdroRight Universal Water-Saving Toilet Repair Kit with Dual Flush Valve, Push Btton Handle, White

  • WATER-SAVING DUAL FLUSH TOILET REPAIR KIT: Easily converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. The permafit silicone seal is also chlorine and chemical resistant and will not warp.
  • ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain.
  • DUAL-FLUSH LIGHT-TOUCH BUTTON UNIQUE SPLIT HANDLE DESIGN: The short center button is the Quick Flush setting that uses significantly lower water volumes for liquids and paper – this setting is needed 4 out of 5 times. The second complete push button at end is the Full Flush that uses the normal amount of water for solids.
  • COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE WITH MANSFIELD TOILETS. The HYR451T combines two products that together will increase your toilet’s efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve.
  • HASSLE-FREE INSTALLATION: Drop-in installation without tools in 5 to 10 minutes – tank removal not required.
  • IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flu....
Check Stock