Top Usb Camera For Raspberry Pi

MakerSpot 5-Port Stackable USB Docking Hub for Raspberry Pi Zero V1.3 (with Camera Connector) and Pi Zero W/2W (with Bluetooth & WiFi)

  • 5 x USB 2.0 data and charging ports, a micro USB port for power input up to 2.3A consumption .
  • 5 x electrolytic capacitors to filter electrical noise and stabilize voltage with an independent protection circuit to limit total current to 2.3A .
  • an RJ45 Ethernet port with Realtek RTL8152B 10/100M chip, A 3.5mm audio jack, supporting both recording and playback .
  • Compatible with Raspberry Pi Zero v1.3 (with Camera Connector) and Raspberry Pi Zero W / Pi Zero 2 W (with Bluetooth and WiFi) .
  • Raspberry Pi Zero shown in the photos is for illustrative purpose only, not included in this offer.
Check Stock

2 Pack Wired USB Controller Gaming Joystick for SNES Game pad for Windows PC MAC Computer Raspberry Pi Sega Genesis emulator

  • ♥ Supported Operating system:for Windows 98, ME, Vista, 2000, 2003, XP, 7, 8, 8.1, 10.
  • for Linux UBUNTU, for Linux Mint, for Android Linux (via an USB OTG cable).
  • ♥ Supported Device (With USB storage device):for PC, Notebook Computer, Laptop Computer.
  • for Android Smartphone: connect via an USB OTG cable.
  • for Raspberry Pi (for RPI, Raspberry pie):for Raspberry Pi 1 Model B, Model A, for Raspberry Pi 1 Model B+, for Raspberry Pi Zero, for Raspberry Pi 2, for Raspberry Pi 3 Model B, for Raspberry Pi 3,for Retro Pie. --- Note: NOT SUPPORT for Android TV BOX..
  • ♥ Buttons: D-pad, Start, Select , A ,B,X,Y.
  • ♥ USB 2.0 port game controllers , plug and play, no addition software..
  • ♥ Package included: 2 X Game Controller Gamepad as images display.
Check Stock

Wired USB N64 Controller, FISUPER Classic Video Game Controller USB Gamepad for Windows PC MAC Raspberry PI Retropie (Gray)

  • 1.【Wide Compatibility】: This is USB controller, compatible with the devices with USB port, such as: PC, Notebook Computer, Laptop Computer.
  • Android Smartphone: connect via an USB OTG cable.
  • Raspberry Pi (RPI, Raspberry pie): Raspberry Pi 1 Model B, Model A, Raspberry Pi 1 Model B+, Raspberry Pi Zero, Raspberry Pi 2, Raspberry Pi 3 Model B, Raspberry Pi 3, Retro Pie. — Note: NOT SUPPORT Android TV BOX..
  • 2.【Supported Operation System】: Windows 98, ME, Vista, 2000, 2003, XP, 7, 8, 8.1, 10.
  • Linux UBUNTU, Linux Mint, Android Linux (via an USB OTG cable).
  • Retrogaming operating systems: RetroPie, Recalbox, Happi Game Center, Lakka, ChameleonPi, Piplay..
  • 3.【USB Gamepad for N64 Games】: it is specially designed for n64 games, you can download the emulator that you want to use. Supported Game Emulators: Current: Project64, 1964, MAME (MESS), Mupen64Plus, Sixtyforce, CEN64.
  • Historical: Project Unreality, Corn, UltraHLE, Nemu64.
  • 4.【Sensitive and Accurate】: This N64 controller features 14 function buttons (including Left and Right shoulder functions and Z-trigger) and 1 analog joystick.These sensitive and accurate little things will ensure you a perfect control and performance in every game operation..
Check Stock

BIGTREETECH Upgrade PI TFT70 TFT LCD Display DSI 800x480 for Raspberry Pi Model 3D Printer Controller 7in Capacitive Touch Screen 165X100mm

  • The high-quality ribbon flex cable is soft and compact, easy to install, perfect show video..
  • Feature: the fit for Raspberry Pi camera cable each end is reinforced with a stiffener to make insertion easier. Work fine with your need and would be....
  • Easy to use: directly-pluggable, one end of the cable is 15 Pin 1.0mm Pitch interface to for Raspberry Pi camera and another end with 15 Pin 1.0mm....
  • Compatible: the cable fit for Raspberry Pi Model A/B/B+, Pi 2B, Raspberry Pi 3B, 3B+, Pi 4B, camera module and display.
  • If you have any issues for Raspberry Pi Camera Cable, please contact us, we will do our best for you..
Check Stock

Wired USB N64 Controller, FISUPER Classic Video Game Controller USB Gamepad for Windows PC MAC Raspberry PI Retropie (Clear Blue)

  • 1.【Wide Compatibility】: This is USB controller, compatible with the devices with USB port, such as: PC, Notebook Computer, Laptop Computer.
  • Android Smartphone: connect via an USB OTG cable.
  • Raspberry Pi (RPI, Raspberry pie): Raspberry Pi 1 Model B, Model A, Raspberry Pi 1 Model B+, Raspberry Pi Zero, Raspberry Pi 2, Raspberry Pi 3 Model B, Raspberry Pi 3, Retro Pie. --- Note: NOT SUPPORT Android TV BOX..
  • 2.【Supported Operation System】: Windows 98, ME, Vista, 2000, 2003, XP, 7, 8, 8.1, 10.
  • Linux UBUNTU, Linux Mint, Android Linux (via an USB OTG cable).
  • Retrogaming operating systems: RetroPie, Recalbox, Happi Game Center, Lakka, ChameleonPi, Piplay..
  • 3.【USB Gamepad for N64 Games】: it is specially designed for n64 games, you can download the emulator that you want to use. Supported Game Emulators: Current: Project64, 1964, MAME (MESS), Mupen64Plus, Sixtyforce, CEN64.
  • Historical: Project Unreality, Corn, UltraHLE, Nemu64.
  • 4.【Sensitive and Accurate】: This N64 controller features 14 function buttons (including Left and Right shoulder functions and Z-trigger) and 1 analog joystick.These sensitive and accurate little things will ensure you a perfect control and performance in every game operation..
Check Stock

2 Pack USB Wired N64 Controller, suily Classic N64 PC Gamepad Joystick Controller for Windows PC MAC Linux Raspberry Pi 3 (Black/Gray)

  • Use the generic standard USB port, if your program or application accepts USB controller input, it can be used natively without drivers or patches, JUST PLUG AND PLAY!.
  • Supported Operating system: Windows 98, ME, Vista, 2000, 2003, XP, 7, 8, 8.1, 10.
  • Linux UBUNTU, Linux Mint, Android Linux (via an USB OTG cable).
  • Retrogaming operating systems: RetroPie, Recalbox, Happi Game Center, Lakka, ChameleonPi, Piplay..
  • Supported Device (With USB storage device): PC, Notebook Computer, Laptop Computer.
  • Android Smartphone: connect via an USB OTG cable.
  • Raspberry Pi (RPI, Raspberry pie): Raspberry Pi 1 Model B, Model A, Raspberry Pi 1 Model B+, Raspberry Pi Zero, Raspberry Pi 2, Raspberry Pi 3 Model B, Raspberry Pi 3, Retro Pie. — Note: NOT SUPPORT Android TV BOX..
  • Supported Game Emulators: Current: Project64, 1964, MAME (MESS), Mupen64Plus, Sixtyforce, CEN64.
  • Historical: Project Unreality, Corn, UltraHLE, Nemu64..
  • Super sensitive buttons for precision control. Third party controller, not original Nintendo 64 controller. But it works phenomenal with the Raspberry Pi game emulation and so on. Cord is approx 5.9 ft. Long..
Check Stock

Geekworm X820 V3.0 2.5“ SATA HDD/SSD Storage Expansion Board, USB 3.0 Mobile Hard Disk Module for Raspberry Pi 3 B+/3B/ROCK64/Tinker Board&2.5 Inch SATA HDD/SSD

  • ✔ Please use this high quality certified DC 5V 4A power supply(ASIN :B07413Q5Y4).Power supply request: 5Vdc +/-5% , 4A.
  • The power adapter not only powers Raspberry Pi board but also powers your SSD or HDD. If the power is low, the SSD/HDD may not be identified or damage your RPi or X820 board. [Do Not Use ASIN:B01K0608A0!!!].
  • ✔ Raspberry Pi SATA X820 V3.0 HDD/SSD USB3.0 shield expansion board provides an complete storage solution for Raspberry Pi motherboard/ROCK64, Support up to 4TB 2.5 inch SATA interface hard disk drives (HDD) / solid-state drive (SSD). A good raspberry pi sata adapter for Raspberry Pi 3B+, 3B, 2B, B+, ROCK64. Note: For Raspberry Pi 4 Model B 2.5 inch SATA HDD/SSD storage board, please refer to ASIN:B07VXF2HJG.
  • For Raspberry Pi 4 Model B mSATA SSD storage board, please refer to ASIN: B07VXFGFLX.
  • ✔ X820 V3.0 supports USB booting from your HDD/SSD('reboot' command is supported), a useful and reliable function to every raspberry pi users or fans. Suggest to use with geekworm x820 metal case(ASIN :B07GRZRW7J).
  • User manual, pls refer to Geekworm WiKi search(X820)..
  • ✔ Powers the Raspberry Pi via Pi's 40-pin header or Micro USB socket.
  • Furthermore, On-board XH2.54 connector and USB power socket (5V 2A output) to power other devices,....
Check Stock

LUXMO PREMIUM Wired USB Controller for N64 Games, Classic USB Gamepads Joystick for Windows PC MAC Raspberry Pi3 (Blue)

  • **Supported Device (With USB storage device): PC, Notebook Computer, Laptop Computer.
  • Android Smartphone: connect via an USB OTG cable.
  • Raspberry Pi (RPI, Raspberry pie): Raspberry Pi 1 Model B, Model A, Raspberry Pi 1 Model B+, Raspberry Pi Zero, Raspberry Pi 2, Raspberry Pi 3 Model B, Raspberry Pi 3, Retro Pie. — Note: NOT SUPPORT Android TV BOX..
  • **Simple to Use: Just USB plug and play, no drivers or software required..
  • **Upgraded Version: an improved 3D-Analog stick, it is more precise, and double shoulder buttons bring you excellent gaming experience..
  • **Wired USB Controller: the cable length is approx. 1.8meter(5.9 feet), which is stable single and long enough for you to play games comfortable..
  • **NOTE: This is third-party controller, not official one..
Check Stock

2 Pack iNNEXT SNES Retro USB Controller Gamepad Joystick, USB PC Super Classic Controller Joypad Gamestick for Windows PC MAC Linux Raspberry Pi 3 Sega Genesis Higan

  • ...ndard USB port, if your program or application accepts USB controller input, it can be used natively without drivers or patches, JUST PLUG AND PLAY! Cord is approx. 5 ft. Long. Super sensitive buttons for precision control. Third party controller, not original SNES / NES controller. But it works phenomenal with the Raspberry Pi game emulation and so on..
  • ★ Supported Operating system: Windows 98, ME, Vista, 2000, 2003, XP, 7, 8, 8.1, 10.
  • Linux UBUNTU, Linux Mint, Android Linux (via an USB OTG cable).
  • Retrogaming operating systems: RetroPie, Recalbox, Happi Game Center, Lakka, ChameleonPi, Piplay.
  • ★ Supported Device (With USB storage device): PC, Notebook Computer, Laptop Computer.
  • Android Smartphone: connect via an USB OTG cable.
  • Raspberry Pi (RPI, Raspberry pie): Raspberry Pi 1 Model B, Model A, Raspberry Pi 1 Model B+, Raspberry Pi Zero, Raspberry Pi 2, Raspberry Pi 3 Model B, Raspberry Pi 3, Retro Pie. — Note: NOT SUPPORT Android TV BOX..
  • ★ Supported Platform: Steam (Not Support all games. Perfect for Several simple steam games).
  • ★ Supported Game Emulators: NES, SNES, Snes9x, ZSNES, Higan, Handheld GBA emulator, Sega Genesis emulator, Sega OpenEmu (Only support OS X), RetroArch (Works perfect on Android),....
Check Stock

Fosiya 1 Player USB Encoder to PC Arcade Joystick Red Top Ball + 10x 5V LED Arcade Buttons for Arcade PC Games Mame Raspberry Pi

  • ...ses a standard USB port, if your program or application accepts USB controller input, it can be used natively without drivers or patches, JUST PLUG AND PLAY! Cord is approx. 5.9 ft. Long. Super sensitive buttons for precision control. Third party controller, not original controller. But it works phenomenal with the Raspberry Pi game emulation and so on..
  • Supported Operating system: Windows 98, ME, Vista, 2000, 2003, XP, 7, 8, 8.1, 10.
  • Linux UBUNTU, Linux Mint, Android Linux (via an USB OTG cable).
  • Retrogaming operating systems: RetroPie, Recalbox, Happi Game Center, Lakka, ChameleonPi, Piplay.
  • Supported Device (With USB storage device): PC, Notebook Computer, Laptop Computer.
  • Android Smartphone: connect via an USB OTG cable.
  • Raspberry Pi (RPI, Raspberry pie): Raspberry Pi 1 Model B, Model A, Raspberry Pi 1 Model B+, Raspberry Pi Zero, Raspberry Pi 2, Raspberry Pi 3 Model B, Raspberry Pi 3, Retro Pie. --- Note: NOT SUPPORT Android TV BOX..
  • Supported Game Emulators: Current: Project64, 1964, MAME (MESS), Mupen64Plus, Sixtyforce, CEN64.
  • Historical: Project Unreality, Corn, UltraHLE, Nemu64.
  • Reliable Warranty: 100% Money Back Guarantee.
  • hassle free 6-month replacement warranty with friendly and professional customer service. If you have ....
Check Stock

Arducam Raspberry Pi HQ Camera, 12.3MP IMX477 Camera Module with CS-Mount Lens, Automatic IR-Cut Switching All-Day Image, Compatible with Raspberry Pi 4 Model B, Pi 3/3B+, and Pi Zero 2W

  • Raspberry Pi HQ Camera: This camera module offers higher resolution, up to 12MP, which can deliver better image quality than 8MP. Also adopting IMX477 sensor for shape image, resolution 4056*3040 pixels, frame rate 30 fps@1080p, 60fps@720p, VGA90 video modes, IR Sensitivity..
  • IR-Cut：The camera can switch IR-CUT filter in and out automatically, supports both day and night vision. which can keep you all-day image..
  • Wide Compatibility: The IMX477 camera module is not only compatible with all models of Raspberry Pi 1, 2, 3 and 4, but also with Raspberry Pi Zero and Zero 2W, which can be easily used with a simple configuration..
  • Package included: Come with a CS-Mount lens and two cables, 300mm 15-22 pin cable for Pi 1-4 connection and 300mm 22-22 pin cable for Pi 0 and Compute Module connection. Note: This camera module supports the latest Raspberry Pi OS Bullseye (released on Jan 28th, 2022) and libcamera apps, not for the previous Raspberry Pi OS (Legacy) users.).
  • Application: This Raspberry Pi HQ camera can be used to monitor 3D printer, and many other vision applications demand IMX477 camera. It can also serve for Artificial Intelligence, like facial recognition, high-speed capturing and so on..
Check Stock

Arducam Pi Camera Cable, Octoprint Octopi Webcam, Monitor 3D Printer, 3.28FT/100CM Long Extension Flex Ribbon Cable for Raspberry Pi

  • 100cm/3.28ft length, 15 Pin 1.0mm Pitch interfaces, longer than the standard Raspberry Pi camera cable..
  • Used on OctoPi, Raspbian, MotionEye for 3D printer monitoring, surveillance camera or other Pi cam projects..
  • Natively compatible with all Raspberry Pi A&B series board, camera module and display..
  • Long enough for mounting the camera, especially useful when you don't want to place the camera near the Raspberry Pi..
  • Arducam is a company dedicated to open source hardware and software, specifically for Arduino and Raspberry Pi camera solutions. We also offer customized turnkey design and manufacturing solution services for customers who want their products to be unique..
Check Stock