Top Usb To Serial Arduino

Treedix 2pcs ATmega328P CH340 Development Board Compatible with Arduino UNO R3 Board Kit for Starter

  • The board is a microcontroller board based on the CH340. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button..
  • This is compatible board with an Atmega328p and a CH340G serial converter, 100% Compatible with Arduino UNO R3..
  • This board has the following new features: 1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible with both the board that uses the AVR, which operates with 5V and with the Due that operates with 3.3V. The second one is a not connected pin, that is reserved for future purposes. Stronger RESET circuit..
  • Friendly: the board is easy to use for Arduino starter, It contains everything needed to support the microcontroller.
  • simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started..
  • We strive to put our hundred percent to meet your requirements and try our best to achieve your satisfaction!.
Check Stock

Treedix ATmega328P CH340 Development Board Compatible with Arduino UNO R3 Board Kit for Starter with Cable

  • The board is a microcontroller board based on the CH340. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button..
  • This is compatible board with an Atmega328p and a CH340G serial converter, 100% Compatible with Arduino UNO R3..
  • This board has the following new features: 1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible with both the board that uses the AVR, which operates with 5V and with the Due that operates with 3.3V. The second one is a not connected pin, that is reserved for future purposes. Stronger RESET circuit..
  • Friendly: the board is easy to use for Arduino starter, It contains everything needed to support the microcontroller.
  • simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started..
  • We strive to put our hundred percent to meet your requirements and try our best to achieve your satisfaction!.
Check Stock

Ingcool 4G / 3G / GNSS HAT Board for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH,Jetson Nano Based on SIM7600A-H 4G Support 4G Connection,LTE CAT4 for Downlink Data Transfer,

  • Compatible with Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH,Jetson Nano,Onboard USB interface, to test AT Commands, get GPS positioning data, and so on,Onboard CP2102 USB to UART converter, for serial debugging.
  • Breakout UART control pins, to connect with host boards like Arduino/STM32，SIM card slot, supports 1.8V/3V SIM card.
  • This Product mainly applicable in North America (US, CA, MX). Supports dial-up, telephone call, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.Supports GPS, BeiDou, Glonass, LBS base station positioning.
  • Onboard audio jack and audio decoder for making telephone call，Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper，2x LED indicators, easy to monitor the working status.
  • Supports SIM application toolkit: SAT Class 3, USAT，Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32).
Check Stock

WayinTop 20x4 2004 LCD Display Module with IIC/I2C/TWI Serial Interface Adapter (Yellow Green/2004)

  • 【20x4 LCD Display】With this shield, you can display whatever you want by programming the for Arduino board. Therefore, this is a perfect choice to make your project more interesting and vivid! Totally display 20 characters in one row, 4 rows can display 80 characters..
  • 【IIC Interface Adapter】No need to buy the adapter extra, this kit contains a IIC/I2C/TWI Serial Interface Adapter, with witch you can start your project at any time..
  • 【Easy to Use】 Less I/O ports are occupied, only four - VCC, GND, SDA (serial data line), SCL (serial clock line). Address of the module: 0x27.
  • 【Support IIC Interface】It only takes two I/O port thus saving more for other usages. You can adjust the contrast by the potentiometer at its back. If you don’t want the back light, you can also unplug the jumper cap at the LCD back..
  • 【Widely Applications】LCD display module based on the popular controller, works great with for Arduino and other micro-controllers..
Check Stock

ACEIRMC 3pcs IIC I2C TWI Serial LCD 2004 20x4 Display Screen Blue + IIC I2C Module Interface Adapter for Raspberry Pi Arduino (Blue)

  • The LCD has always been a device that acts as a window in human-computer interaction. For example, the prompt window on some instrument devices, the temperature and humidity prompt box, the device running status monitor, and the prompt screen of the counting device all have LCD figures.
  • LCD2004+I2C 2004 20x4 2004A Blue/Green screen HD44780 Character LCD /w IIC/I2C Serial Interface Adapter Module for arduino.
  • It is a high-performance serial bus with bus rules and high-speed or low-speed device synchronization required for multi-master systems. The I2C bus has only two bidirectional signal lines, a serial data line (SDA) and a serial clock line (SCL)..
  • Compatible with all devices with I2C interfaces, such as for Arduino, raspberry pi, beagle bone black, tinker board, stm32, esp32 and more..
  • please check which chip you have on i2c interface. (Before you upload the code to the control board, please download the LiquidCrystal_I2C library).
Check Stock

CP2102 6 in 1 USB to TTL Serial Adapter Module USB to TTL 485 232,TTL to 232 485,RS232 to 485 + 4P Dupont Cable Jumper Wire Female to Female for Nextion Display Beitian GPS Arduino Windows

  • -cp2102 serial adapter module supports usb to ttl, usb to rs232, usb to rs485, ttl to 232, ttl to 485, 232 to 485..
  • -USB specification 2.0 not 3.0, compatible with arduino,Windows XP/7/8/10 32bits/ 64bits, Linux etc..
  • -You need to set the dip switches for different conversion purpose..
  • -Before make 6 in 1 usb to ttl module work, you need to install cp2102 driver..
  • -cp2102 usb to ttl adapter widely used with nextion display, beitian gps, esp-01s adapter, sim7000a board etc..
Check Stock

SparkFun FTDI Basic Breakout - 3.3V Development Tool with USB Mini-B Connector Save Space and Money in Your DIY Electronics Projects Pinout of This Board Matches The FTDI Cable

  • Save space by using this genuine FTDI FT232RL USB to serial IC breakout to program your microcontroller.
  • Has TX and RX LEDs that allow you to see serial traffic on the LEDs to verify the board is working.
  • Designed to decrease the cost of (Arduino-compatible) development and increase ease of use. Includes auto-reset feature.
  • The pins labeled BLK and GRN correspond to the black wire on the FTDI cable that is GND, green is DTR.
  • Uses a SMD 6-pin header on the bottom, which makes it smaller and more compact.
Check Stock

Aluminum Box, Printed Circuit Board Instrument Aluminum Cooling Box DIY Electronic Project Shell

  • This is a economical, powerful, easy-to-use mechanical arm learning kit for Arduino..
  • Ideal robot arm DIY assembly kit for college students, middle school students, DIY enthusiasts, etc..
  • 4 degrees of freedom robot arm with more untrammeled and flexible experience..
  • The control board adopts for UNO R3 original edition, and there are numerous learning materials in the network..
  • After connecting the computer with USB cable, you can send commands through the serial port to control the movement of the arm..
Check Stock

ARCELI ESP-12E ESP8266 UART WiFi Wireless Shield Compatible with Arduino UNO R3

  • Standard pin interface to achieve full compatibility with the pitch Arduino Uno, Mega and so on. (Unless the standard size arduino, such as Nano, Mini).
  • 3.3V power supply using advanced chip (with the official expansion board power chip CC3000 same), so 3.3V Arduino board provided more accurate, so ESP8266 as official cc3000 chip work as normal, there is no gap..
  • It leads to a WiFi module power supply / service interface to facilitate developers to extend the power supply and maintenance..
  • Onboard ESP8266-12 stable industrial grade serial WiFi module, using an enhanced PCB antenna, signal better..
Check Stock

Treedix Mini Pocket AVR Programmer Reset Reprogrammed Module Bootloader BootRescure Compatible with Arduino Controller Board

  • Development board production tool, no other equipment or compiler necessary, Abnormal status recovery bootloader, DIY development board writing bootloader..
  • Used to reprogram the Arduino BootLoader to the microcontroller chip..
  • Easy to program through the ICSP (In-Circuit Serial Programming) interface. Just directly plug it onto the ICSP interface to complete the bootloader..
  • This module can be connected to the ICSP interface, which is the 6 pin headers terminal on the Arduino controller board, which match 5V, MISO, MOSI, SCK, GND and RESET..
  • Compatible with Arduino UNO/UNO Wifi/Nano/Ethernet/Pro/Pro mini/Duemilanove/Diecimila/Mega/Mega 2560/Mega ADK/Leonardo..
Check Stock

AITRIP 5 PCS ESP8266 NodeMCU V3 CP2102 ESP-12F 4M Bytes Internet of Things WiFi Development Board Serial Wireless Module for Arduino IDE Micropython

  • There is the way to guide you to use the new version: The command you needed to use is: esptool.py --baud 115200 --port /dev/tty.SLAB_USBtoUART write_flash -fs 32m -ff 80m --flash_mode dio 0x00000 boot_v1.7.bin 0x1000 user1.bin 0x37c000 esp_init_data_default.bin 0x37e000 blank.bin The important part is “—flash mode dio”.
  • ESP8266 CP2102 NodeMCU LUA ESP-12F WIFI Serial Wireless Module.
  • Compatible with Arduino, works great with the latest Compatible with Arduino IDE/Mongoose IoT/Micropython.
  • SP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor..
  • 5pcs ESP8266 CP2102 NodeMCU LUA ESP-12F WIFI Serial Wireless Module.
Check Stock

Drummond Scientific 3-000-000-207 Nanoject III Replacement Wire Plunger

  • 【High Quality】:100% brand new and high quality. This DIY Robot Arm is made of high-quality material, which have better performance and longer life with greater flexibility and durability..
  • 【Features】:The control board adopts for Arduino UNO R3 original edition, and there are numerous learning materials in the network. After connecting the computer with USB cable, you can send commands through the serial port to control the movement of the arm..
  • 【Material】:Our Robot Arm Kit is composed of high-quality premium electronic components, with stable and reliable performance..
  • 【Lightweight and Portable】:Lightweight and Portable,4 degrees of freedom robot arm with more untrammeled and flexible experience.Ideal robot arm DIY assembly kit for college students, middle school students, DIY enthusiasts, etc..
  • 【After sale】If you are not completely satisfied with our products, please contact us in time, we will serve you wholeheartedly.
Check Stock