Top Vice Grip Tap And Drill

Pin Vise Hand Drill for Jewelry Making - Craft911 Manual Craft Drill Sharp HSS Micro Mini Twist Drill Bits Set, Small Hand Drill for Resin, Rotary Tools for Wood, Jewelry, Plastic, Miniature - Golden

  • ✔️ Mini Jewelry Drill Bit --- Our precise hand drill set make small holes easily in Resin, Pearls, Wood, Plastic, Polymer Clay, Bead, to make necklace, pendant, earring, bracelet, keychain, model, sculpture, etc. Must have craft drills for any crafting works..
  • ✔️ Sharp and Pointy Drill Bits --- manual push drill get the job done faster⚡ and effortlessly. Our small bits are made of M35 HSS (High Speed Steel) which is best known for its durability. The jewelry drill includes 18 pieces of precision twist drill bits in most used sizes to satisfy all you demand. Mini hand drill includes 1mm drill bit set and more..
  • ✔️ Slip Resistant Comfortable Grip --- This makes our manual drill for jewelry making easy to hold and rotate. Our pin vise hand drill has aluminum alloy body which makes it very strong yet light and super smooth rotation to make holes effortlessly. Chuck design allow to change bits very quickly..
  • ✔️ Durable and Affordable --- Even though our price is low but the quality is same if not better of those higher price pin vises. Save money and give our pin vice hand drill for resin a try. Other hobby drill are much smaller or bulky than our jewelers pin vise..
  • ✔️ 90 Days Manufacturer Warranty --- We stand by our superior quality m....
Check Stock

6 Pcs HSS Drill Tap Bit Set, Titanium Coated Combination Drill & Taps M3, M4, M5, M6, M8, M10, 1/4\ Hex Shank, for tapping, drill a hole and cut new threads

  • The wide range of drill tap bit set helps you with tasks like drilling, tapping, deburring and countersinking, all with this single kit. The split point tip resists walking and penetrates faster into the material. Along with fast penetration, the power drill makes your life easy by saving your time and energy..
  • Durable taps are made from hardened high-speed steel (HSS ) vs carbon steel for longer life,which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic.
  • This is a SAE drill tap set, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. Quick Change ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • Can be used to tap various threads. including 6 SAE sizes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC,1/4inch hex quick change shank fit Electric hand drill, impact drill, bench drill,electric screwdriver and other tap machine.
  • Easy to Carry and Use,As the Drill Tap Bits set comes with a portable storage case you can carry it anywhere you go. If you encounter any problems or are not satisfied with the products while usi....
Check Stock

HK Army Vice Paintball Tank Grip 2.0 - Blue/Black

  • The HK Army Vice Tank Grip is the premiere tank grip on the paintball market.
  • Specifically designed to provide you a comfortable, anti-slip, surface area on the rear of your tank.
  • The Vice Tank Grip is comprised of a dual, color-injected, malleable, rubber material that effortlessly wraps around the butt of your carbon fiber tank..
  • Select your favorite HK Army Vice Tank Grip to keep your gun light-weight and reduce "tank-slip," or unnecessary tank movement in game play..
  • One size fits all HPA paintball tanks - Recommended tank sizes: 48ci, 50ci, 62ci, 68ci, 70ci, 88ci, 90ci and 100ci.
Check Stock

HK Army Vice Paintball Tank Grip 2.0 - Red/Black

  • The HK Army Vice Tank Grip is the premiere tank grip on the paintball market.
  • Specifically designed to provide you a comfortable, anti-slip, surface area on the rear of your tank.
  • The Vice Tank Grip is comprised of a dual, color-injected, malleable, rubber material that effortlessly wraps around the butt of your carbon fiber tank..
  • Select your favorite HK Army Vice Tank Grip to keep your gun light-weight and reduce "tank-slip," or unnecessary tank movement in game play..
  • One size fits all HPA paintball tanks - Recommended tank sizes: 48ci, 50ci, 62ci, 68ci, 70ci, 88ci, 90ci and 100ci.
Check Stock

H.S.S. Tap & Drill Full Bundle, UNC, UNF and Metric

  • 3 H.S.S. Tap & Drill Full Bundle for almost all cases..
  • 18 Pc H.S.S. Tap and Drill Set, Unf in Metal Box, 0001-0050.
  • 18 Pc Hss Tap and Drill Set, Metric, 0001-0052.
  • 18 Pc H.S.S. Tap and Drill Set, U.N.C, 0001-0040.
Check Stock

6 Packs Combination Drill & Taps Bit Set, Screw Tapping in SAE Size 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc with Anti-Rust Black Coating, 1/4” Hex Shank and Storage Case

  • COMBINE DRILL and TAP at the same time - All in one and works great and save a lot of time and trouble when doing threads for hinges or other projects.
  • No more using a drill to drill the hole and then tapping it out later with another tool..
  • HIGH VERSATILITY – Set of 6 drill tap bits in SAE sizes 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill, electric screwdriver and other tap machines..
  • HANDY TOOLS – These drill-tap bits are must have if you fabricate a lot.
  • you can use them in aluminum, plastic, wood and other thin soft material metal panel.
  • When you use it, make sure it is perfectly straight, take your time, go slow, use lubrication to prevent breaking the bit in the hole..
  • EASY TO USE - Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks.
  • Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • WORRY-FREE – This Drill Tap Bits set comes with a portable storage case for convenient use and store. If you encounter any problems in using the products, please feel free to contact us for satisfactory customer service..
Check Stock

48 Pieces Pin Vise Hand Drill Bits, Micro Mini Twist Drill Bits Set with Precision Hand Pin Vise Rotary Tools for Wood, Manual Work DIY, Jewelry, Plastic, Assembling, Model Making (0.5-3.0mm)

  • ☆ High quality: This adjustable vice has 3 keyless chucks with hardened jaws, which can hold the small drill bit tightly. After repeated use, the drill will not slip or fall off. And can adjust the twist drill with a diameter of 0.2-3.4mm..
  • ☆ Compatible and practical: hand drill clamps can fix small drills.
  • reamers can be used for electronic assembly.
  • ☆ Widely used: small hand drills can be applied to wood.
  • olive nut acrylic, plastic, etc. This is very important for tasks such as watch maintenance, because any slip or beat It may damage other components in the device.
  • ☆ Size: 1 mini pin vice. 48 twist drills 0.5 / 0.6 / 0.7 / 0.8 / 0.9 / 1.0mm (3 each size).
  • 1.1 / 1.2 / 1.3 / 1.4 / 1.5 / 1.6 / 1.7 / 1.8 / 1.9 / 2.0mm (2 each size) ).
  • 2.1 / 2.2 / 2.3 / 2.4 / 2.5 / 2.6 / 2.7 / 2.8 / 2.9 / 3.0mm (1 per size). The full-size pin and sub-drill kit can meet your different needs..
  • ☆ Note: The adjustable pin vise is a hand tool, not a power tool.
  • the twist drill set is not suitable for hard objects like steel. Iron.
Check Stock

6Pcs Combination Drill and Tap Set, Metric Thread M3-M10 Screw Tapping Tool 1/4\ Hex Shank Titanium Plated HSS

  • Applicability: This product includes 1/4 inch hexagon shank HSS drill bits and tap kits. Metric M3, M4, M5, M6, M8, M10 threaded countersunk screws can be tapped together with this drill tap..
  • Material: These drill taps are made of titanium-coated high-speed steel and have a longer service life..
  • Specifications: M3 x 0.5mm pitch, M4 x 0.7mm pitch, M5 x 0.8mm pitch, M6 x 1.0mm pitch, M8 x 1.25mm pitch, M10 x 1.5mm pitch..
  • Design: The drill tap adopts a spiral groove design, and the chip removal process will be better..
  • Accuracy: These drill taps are used for tapping on machines and are usually more precise because human error is eliminated..
Check Stock

Sealey DS01 Drill Stand

  • Drill stand with cast iron base for vertical drilling using a hand drill.
  • Supplied with 65mm drill vice with quick jaw release..
  • Features a preset depth control and stop for drilling depths of up to 60mm, ideal for accurate and repetitive drilling..
  • For use with hand drills with a collar diameter of 38mm if used with the adaptor bush or 43mm if used without.
Check Stock

Century Drill & Tool 93201 1/8-27 NPT Tap and 21/64' Drill Combo Pack

  • Tap and drill Combo pack offers correct drill size for the tap in one convenient package.
  • Tap offers precision cut threads, accurately formed for consistent, exact threading.
  • Tap is heat treated and tempered for file hard threads, and longer, useful life.
  • Tap designed for hand cutting applications.
  • Drill bit made of premium grade high speed steel.
Check Stock

AUTOTOOLHOME Titanium Combination Drill Tap Bit Set 13PCS SAE and Metric Tap Bits Kit for Screw Thread Drilling Tapping Deburring Countersinking

  • Titanium Combination Drill tap bits are made of high speed steel 4341, which can ensure sharp, fast execution and retain strength and efficiency. The surface is treated with a titanium alloy, which greatly improves the cutting performance of the drill, is more wear-resistant and prolongs the service life..
  • 13pcs drill tap kit include SAE and metric sizes, Suitable for most commonly used screw tapping.SAE Included 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC and 1/4-20NC,Metric included M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5 , Includes storage case and quick change adapter for easy bit switching.
  • Drill, tap, deburr and countersink in one quick and easy action,and complete job on copper, brass, aluminum, sheet metal ,mild steel and plastic.work completely, greatly save processing steps and time costs, and improve work efficiency..
  • Each drill tap bit is engraved with the right size, which is convenient for you to choose the size that suits you. Strong hex shank ensures strong connection to drill.a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • Included convenient swivel storage case,Swivel feature props up tap drill bits and securely holds them in place until ready t....
Check Stock

Hanson 1765531 Pts Drill Plus Tap Combo 6-32' Number 36 for Tap Die Extraction

  • This tap and drill set contains a convenient HCS tap and HSS drill bit.
  • Self-aligning taps start and thread straight virtually every time.
  • Great for through holes and irregular surfaces.
  • Plug taps are ideal for general purpose threading.
  • Special chip-breaking technology cuts chips easier.
Check Stock