Top Viscosity Improvers - BuyWiseBest.com

Stanadyne Performance Formula 5 Gallon Pail Treats 2,500 gallons diesel fuel per Pail

Restores/Increase Horsepower – detergents clean deposits in the injection system.
Reduces Fuel Consumption–tests show an average of 4% improvement in MPG and gains up to 9.6%.
Cetane Improver – improves combustion resulting in better engine starting, running & reduced noise.
Reduces Wear – lubricity improvers restore lubricity to ultra low sulfur diesel fuels.
Reduces Emissions – reduces Smoke and Particulates.

Corrosion inhibiters will protect the fuel system from rust and corrosion.
Reduces Fuel Consumption–tests show an average of 4% improvement in MPG and gains up to 9.6%.
Cetane Improver – improves combustion resulting in better engine starting, running & reduced noise.
Reduces Wear – lubricity improvers restore lubricity to ultra low sulfur diesel fuels.
Reduces Emissions – reduces Smoke and Particulates.

Restores/Increase Horsepower – detergents clean deposits in the injection system.
Reduces Fuel Consumption–tests show an average of 4% improvement in MPG and gains up to 9.6%.
Cetane Improver – improves combustion resulting in better engine starting, running & reduced noise.
Reduces Wear – lubricity improvers restore lubricity to ultra low sulfur diesel fuels.
Authorized Stanadyne Dealer: Diamond Diesel & Turbocharger Service.

Restores/Increase Horsepower: detergents clean deposits in the injection system.
Reduces Fuel Consumption tests show an average of 4 percent improvement in MPG and gains up to 9.6 Percent.
Cetane Improver improves combustion resulting in better engine starting, running and reduced noise.
Reduces Wear: Lubricity improvers restore lubricity to ultra low sulfur diesel fuels.
Reduces Emissions reduces Smoke and Particulates.

Restores/Increase Horsepower: detergents clean deposits in the injection system.
Reduces Fuel Consumption tests show an average of 4 percent improvement in MPG and gains up to 9.6 Percent.
Cetane Improver improves combustion resulting in better engine starting, running and reduced noise.
Reduces Wear: Lubricity improvers restore lubricity to ultra low sulfur diesel fuels.
Reduces Emissions reduces Smoke and Particulates.

Corrosion inhibiters will protect the fuel system from rust and corrosion.
Reduces Fuel Consumption–tests show an average of 4% improvement in MPG and gains up to 9.6%.
Cetane Improver – improves combustion resulting in better engine starting, running & reduced noise.
Reduces Wear – lubricity improvers restore lubricity to ultra low sulfur diesel fuels.
Reduces Emissions – reduces Smoke and Particulates.

Restores/Increase Horsepower – detergents clean deposits in the injection system.
Reduces Fuel Consumption–tests show an average of 4% improvement in MPG and gains up to 9.6%.
Cetane Improver – improves combustion resulting in better engine starting, running & reduced noise.
Reduces Wear – lubricity improvers restore lubricity to ultra low sulfur diesel fuels.
Authorized Stanadyne Dealer: 1) Diamond Diesel & Turbocharger Service.

1.According to ASTM D 4212 (Standard Test Method for Viscosity Cup Immersion)standards.
2.Quickly measures the viscosity of liquids such as paint, lacquer, varnish, syrup and oil..
3.Viscosity is expressed in Zahn seconds which are correlated to viscosity in centistokes.
4.Mainly in order to maintain the stability of the viscosity of the product in the process of use, so that the viscosity is always maintained at the set range to protect the color of the product effect..

Price For: Each Timken OK Load: Not Specified Four-Ball Wear: Not Specified Dropping Point: Not Specified ISO Viscosity Grade: Not Specified Temp. Range: - Item: Motor Oil SAE Grade: 0W-40 Viscosity Index: 186 Series: Mobil 1(TM) Base: Synthetic Size: 1 qt. Viscosity @ 100C: 13.5 Container Type: Bottle Viscosity @ 40C: 75 Pour Point: -54 Degrees C.
Flash Point: 230 Degrees C Country of Origin (subject to change): United States.

★It is made of relevant standards-ASTM D1200-2010《 Standard Test Method for Viscosity by Ford Viscosity Cup》.
--The correction coefficient K value is the time after the filling of the viscosity cup with the secondary standard oil under the set temperature conditions (such as 20 °C ± 0.1 °C), the flow time should be in the range of 30s ~ 100s, the K value should be 1 ± Within 0.03 range. The viscometer should be periodically calibrated to the extent of its frequency of use..
★ 4 Viscosity Cup belongs to laboratory, workshop, control and test instruments. The measured viscosity is conditional viscosity. Namely: a certain amount of sample, at a certain temperature, from the prescribed diameter of the hole flow out of time..

Advanced Technosynthese lubricant for High Performance/Protection.
Specifically designed for powerful & recent cars fitted with Gasoline/Diesel engines/naturally aspirated/turbocharged/indirect/direct injection..
Suitable for all types of fuel: leaded/unleaded Gasoline/Ethanol/LPG/Diesel/Biofuel. // Compatible with catalytic converters..
Can be mixed with synthetic/mineral oils..
Viscosity Grade: SAE J 300/5W-30. // Density at 20°C (68°F): ASTM D1298. // Viscosity at 40°C (104°F): ASTM D445/71.2 mm²/s. // Viscosity at 100°C (212°F): ASTM D445/11.8 mm²/s. // Viscosity HTHS at 150°C (302°F): ASTM D4741/3.5 mPa.s. // Viscosity Index: ASTM D2270. // Pour Point: ASTM D97/-38°C/-36°F. // Flash Point: ASTM D92/224°C/435°F. // Sulfated Ash: ASTM D874/1.1% Weight. // TBN: ASTM D2896/10.2 mg KOH/g..

❤ 【APPLICATION】Digital rotary viscometers are widely used in the measurement of viscosity of non-Newtonian fluids such as inks, paints, coatings, adhesives, greases, juices, dairy products, cosmetics, pharmaceuticals, biological fluids, rubber, mud, pulp, etc..
❤ 【FEATURES】The screen can directly display the viscosity, rotation speed, rotor number, percentage torque and other information. The full scale of the viscometer is automatically corrected according to the standard silicone oil standard value. The measurement result is accurate and reliable, and the repeatability is good..
❤ 【ROTORS】Equipped with a No. 1-4 viscometer rotors. Different rotors can be selected according to the viscosity range of different test liquids, and different speeds can be set..
❤ 【NDJ-8S】The NDJ-8S has a larger viscosity measurement range. The NDJ-5S can be selected for liquids with a small viscosity change range. The NDJ-9S is equipped with a temperature sensor for experimental projects where liquid temperature needs to be monitored at any time. The additional No. 0 rotor is suitable for liquids with a viscosity range of 0-15 mPa.s..
❤ We are the original factory of the viscometer machine, we are confident with our products. If you have any qu....