Top Voltage Stabilizer Coil

IRHAPSODY 12 V DC 200 Amp 4 Pin Heavy Duty Relay/Split Charge Relay Switch, 4 Terminal Relay

coil resistance: 80 ohms. It is more reliable than 2.4W (60 ohms) and 4.8W (30 ohms) relays on the market.
Nominal coil voltage: 12V, Pickup voltage: 8V, Dropout voltage: 1.2V, Maximum applied voltage: 14V.
Heavy duty 12 volt 4 Pin SPST (Single Pole Single Throw) relay.
Large capacity: 200a high current carrying capacity, heavy duty make/break relay.
Ideal for split charging or any vehicle needing a high power relay.

ZVS heating Power Source module, with heating coil included. The heating coil can be soldered onto the PCB..
Input Voltage：DC 5V~12V(This voltage range is the voltage during operation, not the voltage when the power supply is unloaded)..
The width of the object to be heated should be between 1/3 and 1/2 of the inner diameter of the heating coil, and it should not exceed 2/3..
Ensure all the components welding right, power line connected in the right way, then to set up an electric circuit..
The current / voltage is directly linked to what you're heating..

Designed for the professional technician and meet or exceed OEM manufacturers specifications.
The primary winding of the ignition coil is wound with a small number of turns and has a small resistance, applying the battery to this coil causes a sizable DC current to flow.
Manufactured to meet or exceed OEM standards and specifications.
Modern coil designs produce voltage pulses up in the neighborhood of 40, 000 volts from the interruption of the 12-volt power supplied by the battery.
Some modern engines have multiple ignition coils mounted directly on the sparkplugs and instead of single voltage pulses, they may under some engine conditions produce three voltage pulses.

HIGH QUALITY: This is Zvs heating power Supply module including heating coil,it’s durable for a long lasting to life..
INPUT VOLTAGE: DC5V-12V(We are not guarantee the module will work when the voltage is over 12V or less than 5V).
INDUCTION HEATING: power work five minutes to cool. For induction heating current is larger, heating coil is relatively large. When heated, part of the heat generated by the heated object will be passed on to the heating coil, over time, the temperature of the heating coil will be high. If the heating coil in the words of the terminal, the terminal part of plastic melt,Therefore, induction heating the best heating coil directly welded to the PCB..
HEATING COIL: The width of the heated objects as far as possible between the heating coil diameter of 1/3 ~ 1/2, most don’t more than two-thirds..
NOTE: Ensure all the components welding right, power line connect in right way, than to set up an electric circuit, The Width of the heated object is as far as possible between the 1/3 ~ 1/2 of the inner diameter of the heating coil, the maximum not more than 2/3..

Never go beyond its capabilities. Try to stay 10 to 15% below what the rate is for.
12-volt 5-prong relay. Excellent water-repellent and dustproof ability, but not using it in water.
Be careful when inserting the relay into the socket. If you force it, you will bend the female connectors.
Primary leads use 12 a.w.g tinned copper wire. Coil leads use 16 a.w.g.

DS18 3 amp Volt stabilizer - input any voltage between 6-16v and get steady output at 14.4V..
Wide voltage input, steady output voltage @ 14.4V..
Strong performance, high reliability, & best preset voltage.
Input voltage range: 6-16v. Output voltage: constant 14.4V..
Voltage stabilized accuracy: 003c 0.5%. Ripple factor: 003c 0.1%. transfer efficiency: 003e 85%..

Rolling Glide CamLiteSprocketQuick-Hook spring attachmentCobra Coil return springSpeedo-Ring rocker camSwivel Spring Tight tension postPower-Strike Cobra BeaterPara-Clamp II Pro3-Piece Hinged Guard blockSuper Stabilizer DesignIncludes hard shell carrying case.
The pedal's solid foundation can be attributed to its Super Stabilizer design that incorporates a wider baseplate and frame for absolute stability.
At each pedals heel, the specially designed 3-piece Hinge Guard Block provides a more durable hinge point and also lengthens the footboard for increased leverage.
At the heart of the Iron Cobra is the Power Glide cam, which is now the lighter, smoother, more natural feeling LiteSprocket design.
This cam is an offset double-chained Power Glide cam, which accelerates the stroke powerfully as it travels toward the bass drum head.

12 awg tinned copper wires for Pin 30, Pin 87. Length: 5.1in.
16 awg tinned copper wires for Pin 85, Pin 86. Length: 5.1in.
12v dc waterproof 4 wire relay (max 14v). 40 amp / 30 amp High switching capability.
Excellent waterproof and dustproof ability, high quality in any weather conditions.

Bosch style 5-prongs universal relay, SPDT (Single Pole Double Throw).
Pin Specifications: 30-VDC, 85-Ground, 86-Trigger, 87-Output N/O, 87a-Output N/C.
Wide Application: All automotive and devices equipped with a 12 Volt DC power source (car sound systems, security systems, and various other applications).

12 AWG tinned copper wires for Pin 30, Pin 87. Length: 5.1in.
16 AWG tinned copper wires for Pin 85, Pin 86. Length: 5.1in.
12-volt 4 wire waterproof relay (max 14-volt). 80amp / 60amp High switching capability.
Excellent weatherproof and dustproof ability, high quality in any weather conditions.