Top Wall Mount 19 Inch Rack

StarTech.com 4U Wall Mount Network Rack - 14 Inch Deep (Low Profile) - 19\ Patch Panel Bracket for Shallow Server and IT Equipment, Network Switches - 44lbs/20kg Weight Capacity, Black (WALLMOUNT4)

  • 4U WALL MOUNT RACK: This 19 inch wide low profile wall mounted rack has a maximum mounting depth of 14 in [35 cm], recommended for networking equipment up to 12in deep, leaving 2in for cable routing.
  • maximum weight capacity of 44 lbs [20kg].
  • EASY TO INSTALL: The 4U wall mounting patch panel bracket ships fully assembled and comes complete with M6 Screws and M6 Cage Nuts for easier equipment installation, to save you the hassle of sourcing separate mounting hardware.
  • COLD-ROLLED STEEL CONSTRUCTION: The wall mounting data rack features a solid steel design for ultimate durability and to ensure a safe and sturdy mounting solution & includes wall mounting hardware.
  • Installs onto 16" studs with mounting holes.
  • EASY CABLE MANAGEMENT: Built with efficiency in mind, the small wall mount patch panel bracket has rear cable routing access for easy cable organization in your network closet, server room, wiring closet, classroom.
Check Stock

RIVECO 2U Wall Mount Rack for Network| Reinforced Heavy Load 66-99 LBS Small Server Racks Vertical & Horizontal Mounting for 19 inches IT & Studio Equipment.

  • VERSATILE: This folding open rack fits 19-inch standard width equipment for network router, server, NAS, data, audio device. Vertical & horizontal mountable, compact design for limited space application as a network rack, audio rack, NAS rack, AV server rack, or even power equipment shelf. Size range 2U, 3U, 4U, 6U are to meet most applications..
  • STURDY & HEAVY LOAD: Using qualified 2.0mm thick cold rolled steel & 0.2mm powder coating and reinforced back plate, created outstanding torsion resistance & heavy load. This open frame bracket has strengthened structure & increased height, max load can support up to 66-99 LBS..
  • ACCESSORIES: Comes with all the hardware required to install, including 8 set M6 screws & cage nuts, 4 set M5 rack screws, 4 wall mounting bolts..
  • QUICK & EASY INSTALLATION: With detailed instruction, it takes several minutes to get a fully functional wall mount network rack..
  • 3 YEARS WARRANTY:Lifetime technical supports, 100 thousand application cases every year..
Check Stock

Allen Tel Products AT55HM-3 3.5-Inch Height, 2 Rack Units Hinged Wall Mount Bracket

  • 19-Inch wall mount hinged brackets, 6-Inch depth.
Check Stock

Tripp Lite - SRW12US 12U Wall Mount Rack Enclosure Server Cabinet, Hinged, 20.5

  • Unit Dimensions: 23.63" W x 21.6" D x 25" H | Weight: 60 lbs.
  • Wall-mount cabinet secures and organizes 12U of 19-inch rack equipment up to 20.5 inches deep in locations with limited floor space.
  • Swings away from wall on hinge for Easy back door access.
  • Mounts to wall or rolls on floor(with optional Srcaster).
Check Stock

Eforlife Sword Holder Wall Mount Samurai Sword Display Stand Katana Wakizashi Tanto Genji Sword Rack Hanger 1-Tier

  • Designed for general swords such as Katana, Wakizashi, Tanto, Genji, etc..
  • Color: All black. Material: Compressed wood. Decent wall mount stand rack for your swords display..
  • Size: 35x19.5 cm / 13.7x7.6 inch (L*H). You can display your samurai sword which is longer than 13.7 inch..
  • One layer. Two holes in the back to support it on the wall. Very sturdy once you placed it on the wall..
  • Package Content: 1x Sword Holder and mounting accessories for assembly..
Check Stock

Quilting Wooden Ruler Rack with Spool Holder and Space to Store Pins Tacks Bobbins (7'' x19'')

  • KEEP YOUR QUILTING RULERS ORGANIZED - This wooden quilter's ruler rack by Weishidai keeps all of your rulers - larger and small - handy and out of your work space. You never have to search for your rulers again with this great quilt ruler holder. It will keep your rulers organized and within reach when needed. The rack is wooden and has eight horizontal slots to store rulers upright and visible. It measures 19 in Long x 7 in Wide x 0.95 in Thick..
  • PROTECT YOUR RULERS - You paid a premium for all of your quilting rulers and templates, the Weishidai quilting ruler rack helps to protect your investment by keeping all of your rulers separated, thus reduced the chance of surface scratches..
  • BONUS THREAD SPOOL HOLDER - 6 thread spool pegs helps to keep your favorite threads handy..
  • WALL MOUNTABLE - Easily convert this ruler rack to wall mount version to save even more space. Wall mount hardware (2 hangers and 2 screws) included with every ruler rack..
Check Stock

Kenuco 19 Inch Steel Vertical Rack and Wall Mountable Server Rack Mount (Black-5U)

  • Dimensions: W19” x U, maximum load capacity is 75 pounds.
  • Mount server, network or telecommunications devices vertically with this wall-mountable rack.
  • Compatible with EIA-310 compliant devices such as network or telecommunications devices.
  • Low profile rack mount bracket, Quick and easy setup with the included cage screws and nuts for mounting equipment.
  • Save space by mounting IT or AV equipment directly to the wall.
Check Stock

Animal Antics E-J First Grade Reader Box Set: Scholastic Early Learners (Guided Reader)

  • EXCLUSIVE DESIGN FOR RV: This model features a strengthened hitch mount designed carrier to fit Class 3 or higher hitch receivers (front and/or back), giving you extra safety on the road. Please note that hitch receivers must be CHASSIS MOUNTED. Mount the hitch rack to BUMPER MOUNTED HITCH RECEIVER may lead to bumper tearing off and result in SERIOUS DAMAGE to the RV and even DEADLY INJURY. Caution: Due to tight space, please do not install the Volt RV between front vehicle and the trailer..
  • 140 LB TOTAL CAPACITY: Supports up to 70 pounds per rack, our rack is compatible with mountain bikes, electric bikes, road bikes with up to 5-inch fat tires, and up to 58-inch wheelbase. For step thru or lady bikes, bike adapter required (not included).
  • SAFE AND SECURE: Comes with co-injected soft rubberized ratcheting hooks that secure the frame of your bike in place without scratching the metal surface. Featuring dual key locks to prevent bikes and bike rack from being stolen. Adjustable wheel holders allow you to easily accommodate bikes of different sizes. Tighten the wheels with reflective velcro straps that help improve visibility in the dark. Additional security straps included, ensuring your bike stays firmly on the rack.
Check Stock

StarTech.com 8U 19\ Wall Mount Network Rack - Adjustable Depth 12-20\ 2 Post Open Frame Server Room Rack for AV/Data/ IT Communication/Computer Equipment/Switch w/Cage Nuts & Screws (RK812WALLOA)

  • DURABLE & ADJUSTABLE: This adjustable 8U 19" open frame wall mount network rack is EIA/ECA-310 compatible w/ 12-20" mounting depth supports most network switches like Cisco 2960.
  • HEAVY DUTY: Heavy duty 2 post open frame rack supports unobstructed airflow and is easy to install with a durable design made from SPCC cold-rolled steel with support for up to 135lbs of equipment.
  • CERTIFIED PACKAGING: The rack ships flat packed with ISTA-6 certified packaging to ensure complete and undamaged delivery and also features comprehensive assembly instructions.
  • ACCESSORIES INCLUDED: The wall mount server room/ computer/communication/AV/IT equipment rack includes a complete set of screws & cage nuts to securely mount all of your equipment in the rack.
Check Stock

StarTech.com 12U Rack Enclosure Server Cabinet - 4 Post Adjustable Depth (18" to 22") Acoustic Office Enclosure - 600lbs Capacity (RKQMCAB12V2)

  • SOUND INSULATED: Mount your 19 inch equipment, such as computers or AV (Audio Video) electronics, in this sound-insulated AV rack cabinet..
  • 12U CABINET: The 19 inch rack mount cabinet provides 12U of floor standing mounting space, perfect for office, media, or home theater equipment..
  • SLEEK DESIGN: The free standing server rack enclosure features a sleek contemporary design that's ideal for media components. The rack cabinet includes casters for hassle-free maneuverability..
  • BUILT-IN FAN MODULE: The sound reducing server room cabinet also features Integrated three fan module to keep your valuable equipment running cooler..
Check Stock

TLBTEK 17inch Pot Rack Wall Mounted,Pot and Pan Hanging Organizer Racks for the Kitchen,Wall Mounting Pot Lid Utensil Holder,Coffee Mug Wall Rack,Cup Hanger Bar with 10 Detachable S Hooks

  • 【Wrought Cast Iron Pot and Pan Hanging Rack】- pot lid holder are all made of high quality iron material which with strong hardness,sprayed with....
  • 【Unique Simple Design】 black pot rack uses minimalist design which is conformity with easy aesthetic view and looks real cool ,retro.Pot rack wall....
  • 【Enough Long Pot Holders】 hanging pot racks total length size is 17 inch x 3inch x 1.7inch,it’s long enough to hang more cookware than you....
  • 【Multi Purpose Wall Rack】 wall mount pot hanging rail rack with 10 pack s hooks can be used for pots and pans organizer,coffee cup rack under....
  • 【Easy Assemble and Life】 heavy duty pot holders can easy mount on concrete/tile walls or other type wall. Pot hangers for kitchen have sturdy....
Check Stock

19” Rack-Mount Equipment Cooling Fans - 110V/60Hz Power, 4 Cooler Master 80mm Case Fans, Smart Cooling System, Digital LCD Temperature Display & Installation Hardware Screw Included - PylePro PFN41

  • SMART COOLING SYSTEM: Designed to be mounted onto a wide range of 19-inch racks requiring high airflow cooling. It has a four cooler master 80mm ball bearing case fan that helps rack-mount equipment prevents overheating & ensures constant performance.
  • ADJUSTABLE FAN SPEED: This cooling fan designed with programmable easy-to-use thermostat and mode which automatically adjusts the fan’s speed depends on the temperature of the rack-mount equipment for maintaining an optimal temperature.
  • DIGITAL TEMPERATURE INDICATOR: Rack-mount equipment cooling fan has digital LCD temperature display and display screen which indicates inner temperature for cabinet or other multimedia centers & fan system has sensors to easily detect the temperature.
  • LIGHT-BRUSH ALUMINUM CONSTRUCTION: Rack-mount equipment cooling fan is constructed w/ an aluminum frame w/ch is anodized w/ a light-brush finish & the corners CNC-machined & edges chamfered for a high-end professional appearance with a 19-inch size.
  • INSTALLATION HARDWARE SCREWS: The Hardware Screws are included for the installation of the parts. These hardware screws include rack-mount screws and cage nuts which use to hold network servers, routers, switches, or other network devices.
Check Stock