Top Water Pump Fittings

mistcooling 160PSI Misting Pump (220 V-AC)

  • Specs: 160 PSI Mist Pump - 160psi Pump Quiet operation 35DB - self priming - max pressure 200psi pump - Available in 110 V, 220 V & 12 VDC - Thermal Safety Switch - Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps I DON’T THINK THIS BELONGS WITH THIS PUMP - Standard pump inlet: 3/8 inch push lock Fitting. - Standard Pump outlet: ¼ inch Push- lock fitting..
  • Nozzles - Nickel-plated brass button series - With stainless-steel Orifice - Standard 10/24 inch thread - 0.012 inch Orifice - Rust-resistant fixed impeller pin - 0.014 GPM Flow per Nozzle..
  • Fittings - ¼ inch OD - Push to Connect Fittings - Easily Re-Usable - Black Color Fittings - 10/24 Thread Size - Leak Proof Fittings..
  • Tubing - ¼ inch OD Flexible PE Tubing - Max burst pressure is 300psi at 75 degree F - UV Resistant Flexible Tubing - Black Color - UV Treated..
Check Stock

Red Lion RL-SPRK150 115/230 Volt, 1.5 HP, 71 GPM Cast Iron Sprinkler/Irrigation Pump with Thermoplastic Impeller, Red, 97101501

  • BUILT TO LAST: Rugged cast iron pump housing and glass-filled thermoplastic impeller for well water and lake water.
  • pump is factory set at 230 Volts but can be easily switched to 115 Volts.
  • always match the pump's voltage to the source voltage.
  • ONE-TIME PRIMING: No additional priming is required after initial fill.
  • follow the priming instructions in the owner's manual.
  • UP TO 71 GPM at 10 PSI: 44 GPM at 30 PSI - can handle up to 14 sprinkler heads with 1/2-inch fittings or 7 sprinkler heads with 3/4-inch fittings in each zone.
  • SPECIFICATIONS: 1.5 HP, 115/230 Volts, 2-inch Female NPT threaded intake.
  • 1.5-inch Female NPT threaded discharge, Max pressure 44 PSI.
Check Stock

Hydrofarm AAPW400 Active Aqua 400 GPH Submersible Hydroponic Pond Aquarium Water Pump (2 Pack)

  • PROFESSIONAL PUMP: The water pump is designed for ponds, water gardens, fountains, statuary hydroponics, and other water features. Features dual-functioning options of inline or submersible.
  • STRONG AND DURABLE POWER: High-efficiency pump is oil-free and environmentally friendly with output pressures of 3.2 PSI and has a powerful mag drive construction. Built with a ceramic shaft and is suitable for saltwater operations.
  • WATER FLOW CONTROL: Includes an adjustable knob to control the water flow rate, so you can get just the amount of water pressure you want. Maximum flow rate: 400 gallons per hour and is recommended for 40 gallon reservoirs.
  • WIDELY APPLIED: Multiple hose fittings for versatility and the intake aeration kit allows you to naturally oxygenate your water. Use this pump indoors or outdoors and the BPA-Free pump is safe for aquaponic use.
  • INCLUDES: Includes removable foam filters, impellers, rubber mounting feet to reduce vibration and lengthen pump life, 6-foot heavy-duty power cord, and pump which is 4.5 pounds with 120VAC/24W.
Check Stock

Northern Brewer Stainless Steel Counterflow Wort Chiller

  • Chill your wort like the professionals do!.
  • A full 18' of contact area for your wort! The tube-within-a-tube design allows for hot wort to flow through the chiller in one direction, while cooling water flows the opposite direction in a cooling jacket surrounding the wort..
  • Threaded Stainless Steel Fittings for ALL Connections (unlike units from other manufacturers). No Brass Connections and No flimsy tubing clamps required..
  • Solidly constructed of 304 grade stainless steel with 1/2" NPT Wort Fittings and Male Garden Hose Threaded Water Fittings..
  • Low Flow Restriction: Gravity feed your wort or use a pump. The choice is yours!.
Check Stock

Thermaltake Pacific C360 Ddc Res/Pump 5V Motherboard Sync Copper Radiator PETG Hard Tube Water Cooling Kit CL-W243-CU12SW-A

  • Analog/digital lighting Analog lighting allows a selection of 7 lighting effects with the included a RGB Controller. Connect lights to select 5V RGB Capable motherboards TO utilize digital lighting schemes from as US aura Sync, Gigabyte RGB FUSION, MSI Mystic Light Sync, and ASROCK polychrome Sync.
  • All included the C360 hard tube Kit contains a CPU water block, pump/reservoir, radiator, fans, fittings, tubing, and coolant, which are components necessary to complete a CPU water cooling loop.
  • Slim copper radiator the C360 is engineered with 12 copper flat tubes and 17 fins per Inch. This radiator’s 27mm thick design assures fitment compatibility with most form Factor chassis.
  • C pro fittings build like a Pro with a new take on compression fittings. Engineered with four Built in O rings to provide maximum leak prevention and a secured compression seal.
  • Exclusive components W4 a RGB Edition water block, T1000 pure Clear Coolant, and a new pr15 ddc pump/reservoir combo.
Check Stock

Hydrofarm AAPW1000 Active Aqua 1000 GPH Submersible Hydroponic Pond Aquarium Water Pumps (2 Pack)

  • PROFESSIONAL PUMP: The water pump is designed for ponds, water gardens, fountains, statuary hydroponics, and other water features. Features dual-functioning options of inline or submersible. UL-listed.
  • STRONG AND DURABLE POWER: High-efficiency pump is oil-free and environmentally friendly with output pressures of 4.9 PSI and has a powerful mag drive construction. Built with a ceramic shaft and is suitable for saltwater operations.
  • WATER FLOW CONTROL: Includes an adjustable knob to control the water flow rate, so you can get just the amount of water pressure you want. Maximum flow rate: 1000 gallons per hour and is recommended for 100 plus gallon reservoirs.
  • WIDELY APPLIED: Multiple hose fittings for versatility and the Venturi intake aeration kit allows you to naturally oxygenate your water. Use this pump indoors or outdoors. The BPA Free pump is safe for aquaponic use.
  • INCLUDES: (2 Pack) of pumps with removable foam filters, impellers, rubber mounting feet to reduce vibration and lengthen pump life, 6-foot heavy-duty power cord, and pump which is 4.5 pounds with 120VAC/92W.
Check Stock

TERA PUMP Manual Siphon Liquid Transfer Tube Drum Barrel Pump for 15 to 55 Gallon Drums

  • MANUAL ROTARY PUMP: Our plastic drum pump is a hand-operated pump constructed with a polypropylene body, Ryton rotor, and vanes for resistance to chemicals.
  • Suitable plastic barrel pump for a variety of auto, industrial, and commercial applications.
  • MANY USES: This hand barrel pump is suitable for water-based solutions of acid, alkalis and salt, some organic solvents, water, and all petroleum products.
  • Barrel hand pump also works with most organic acids and water-soluble inorganic chemicals.
  • QUICK TRANSFERS: The hand drum pump is capable of transferring material at 10 ounces per stroke (6.5 gallons per minute at 70 revolutions per minute) with temperatures up to 130 degrees Fahrenheit.
  • Fast chemical drum pump and water barrel pump.
  • WIDE COMPATIBILITY: Our rotary hand pump fits 15 gallon, 20 gallon, and 55 gallon drums with 1.25 " and 2" NPT bung fittings.
  • 55 gallon drum pump is intended strictly for use in professional and industrial environments.
  • PRODUCT SPECIFICATIONS: Capacity: 300 CC Per Revolution.
Check Stock

Thermaltake Pacific C240 Ddc Res/Pump 5V Motherboard Sync Copper Radiator PETG Hard Tube Water Cooling Kit CL-W242-CU12SW-A

  • Analog/digital lighting – Analog lighting allows a selection of 7 lighting effects with the included a RGB Controller. Connect lights to select 5V RGB Capable motherboards TO utilize digital lighting schemes from as US aura Sync, Gigabyte RGB FUSION, MSI Mystic Light Sync, and ASROCK polychrome Sync.
  • All included – the C240 hard tube Kit contains a CPU water block, pump/reservoir, radiator, fans, fittings, tubing, and coolant, which are components necessary to complete a CPU water cooling loop.
  • Slim copper radiator – the C240 is engineered with 12 copper flat tubes and 17 fins per Inch. This radiator’s 27mm thick design assures fitment compatibility with most form Factor chassis.
  • C-pro fittings – build like a Pro with a new take on compression fittings. Engineered with four Built in O-rings to provide maximum leak prevention and a secured compression seal.
  • Exclusive components – W4 a RGB Edition water block, T1000 pure Clear Coolant, and a new pr15-ddc pump/reservoir combo.
Check Stock

mistcooling Patio Misting System - 160psi (12VDC-12 Nozzles Kit - W/Out Enclosure)

  • Features: Base 10 Nozzle Kit Includes: - 1- 160 PSI Misting Pump - 12 – Brass/Stainless Steel Misting Nozzles - 12 – Push to Connect Black Color Misting Tees - 1 – Push to Connect Misting Elbow - 1 – Calcium Inhibitor Filter - 30 - ¼ Inch Black Clamps - 50 Feet of Black Tubing - 6 Ft Feed Line.
  • Specs: - 160 PSI Mist Pump - 160psi Pump Quiet operation 35DB - self priming - max pressure 200psi pump - Available in 110 V, 220 V & 12 VDC - Thermal Safety Switch - Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps I DON’T THINK THIS BELONGS WITH THIS PUMP - Standard pump inlet: 3/8 inch push lock Fitting. - Standard Pump outlet: ¼ inch Push lock fitting..
  • Nozzles - Nickel-plated brass button series - With stainless-steel Orifice - Standard 10/24 inch thread - 0.012 inch Orifice - Rust-resistant fixed impeller pin - 0.014 GPM Flow per Nozzle.
  • Fittings - ¼ inch OD - Push to Connect Fittings - Easily Re-Usable - Black Color Fittings - 10/24 Thread Size - Leak Proof Fittings.
  • Tubing - ¼ inch OD Flexible PE Tubing - Max burst pressure is 300psi at 75°F - UV Resistant Flexible Tubing - Black Color - UV Treated. MC12020-MC12024.
Check Stock

Thermaltake Pacific Gaming R240 D5 LCS Solution Water Cooling Kit - Black

  • Including a CPU water block, PR15-D5 pump/reservoir combo, 240mm slim radiator, 200mm flexible tubing, 2 Ring 12 LED red fans, 6 compression fittings, 2 adapter fittings..
  • High-quality CPU water block supports all modern CPU sockets with a universal mounting mechanism that provides error-free, tool-less installation..
  • Manufactured from POM and PMMA, the unit includes a 200ml reservoir with an integrated D5 pump, offering exceptional performance and unrivalled reliability for all gaming systems..
  • Optimized for maximum heat dissipation, the high performance 240mm slim radiator utilizes high-density fin design and German zinc alloy aluminium..
  • 120mm high-static pressure fan with a patented 256 colours LED ring adds style to the systems without compromising on the performance..
Check Stock

F-AL-3/8, 3/8″ Threaded Female Tank Filter for Mosquito Misting Systems

  • {Made in USA Pump & Tubing} Mid Pressure Patio Misting Kit complete with 200PSI Booster Pump, Cleanable Brass/Stainless Steel Misting Nozzles, UV treated flexible tubing, and push lock fittings. Easy to install..
  • {Pump Specifications} 110 Volt Kit Includes: – 200PSI Booster Pump with Plug (110v) – 50ft Flexible Tubing – Calcium Inhibitor Filter – 12 Brass/Stainless Steel Mist Orifice Nozzles – 0.012” – 11 – Push Lock Mist Tees – 1 – Push Lock End Mist Elbow – 6ft Feed line with 3/4 Garden hose connector – Plastic Clamps.
  • {Installation} – Push Lock Fittings – Easy Connect -Whisper Quiet Operation Easy to hook with any garden hose Max Water pressure 200 PSI Supports up to 20 Nozzles Wall Mountable Plugs in to standard 115V outlet (wall plug included on 110v models only).
  • {Comes with Filter to protect your Nozzles} Booster Pump Features: Built-In Thermal Safety Switch Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4” Garden Hose Connecter Outlet Fitting: 1/4” and/or 3/8” Push Lock.
  • {Easy to Expand} Booster Pump Features: Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4” Garden Hose Connecter Outlet Fitting: 1/4” and/o....
Check Stock

Active Aqua AAPW400 400 GPH 24-Watt Indoor/Outdoor Submersible Oil Free Hydroponic Pond Aquarium Water Pump for 40 Gallon Reservoir (4 Pack)

  • PROFESSIONAL PUMP: The water pump is designed for ponds, water gardens, fountains, statuary hydroponics, and other water features. Features dual-functioning options of inline or submersible.
  • STRONG AND DURABLE POWER: High-efficiency pump is oil-free and environmentally friendly with output pressures of 3.2 PSI and has a powerful mag drive construction. Built with a ceramic shaft and is suitable for saltwater operations.
  • WATER FLOW CONTROL: Includes an adjustable knob to control the water flow rate, so you can get just the amount of water pressure you want. Maximum flow rate: 400 gallons per hour and is recommended for 40 gallon reservoirs.
  • WIDELY APPLIED: Multiple hose fittings for versatility and the intake aeration kit allows you to naturally oxygenate your water. Use this pump indoors or outdoors and the BPA-Free pump is safe for aquaponic use.
  • INCLUDES: Includes removable foam filters, impellers, rubber mounting feet to reduce vibration and lengthen pump life, 6-foot heavy-duty power cord, and pump which is 4.5 pounds with 120VAC/24W.
Check Stock