Top Water cooled Engine Oil

Diesel Water Parking Heater Hydronic Heater 5KW 12V Boat Caravan Motorhome Truck Camper Trailer Remote Control Diesel Water Heater Kit

  • PROTECT YOUR ENGINE ➤ The water heating type parking heater uses automobile coolant to exchange heat, preheats the engine and the cab, solves the problem of difficult engine startup at low temperature, greatly reduces air-cooled wear caused by low temperature startup, and extends engine life by more than 30%..
  • LESS FUEL PREHEATING ➤ Compared with cold-start engine preheating, the water heating parking heater preheating consumes less fuel. In the cold winter, you can warm up the engine and cab before getting on the car to drive away the severe cold. Improve the driving environment and no longer need a warm store..
  • FULL INSTALLATION SET ➤ 1 x Water Parking Heater, 1 x Auto Switch And Remote Control (Batteries Not Included), 1 x Water Pump, 1 x Wiring Harness, 1 x Tube, 1 x Oil Pump, 1 x Pump Holder, 1 x Fuel Filter, 1 x Oil Tube, 1 x Big Elbow, 1 x Small Elbow, 1 x Air Inlet Hose, 1 x Exhaust Pipe, 1 x Exhaust Silencer, 1 x Hose Holder, 1 x Cross, 1 x Air Filter, 6 x Short Pipe, 1 x Oil Extractor, 12 x Hose Clamps, 12 x Small Hose Clamp, 5 x Screwiv, 4 x Screw, 1 x Iron Stent..
  • TECHNICAL PARAMETERS ➤ Material: Metal &....
Check Stock

BILT HARD 420cc 15HP Gas Engine with Electric Start, Horizontal Shaft 4 Stroke OHV Gas Motor, Gas Powered Multi-Use Engine

  • POWERFUL ENGINE - Our 420cc displacement 4-stroke horizontal cylinder gas engine has a max torque of 19.56ft.lbs @2500RPM, max 3600 RPM speed, 15 maximum horsepower, 1.7 gal fuel tank. Built to meet & exceed industrial grade quality standards & provide dependable performance. The engine is shipped dry so make sure you add gasoline and engine oil correctly before starting (not included)..
  • SHAFT SPECS - 1 in Diameter, 3.48 in Length, end tapped with 3/8 in.-24 UNF.
  • Mounting pattern 7.7L x 4.06W-4.09W in. Durable design runs quiy and provides smooth operation.This engine spark plug system can take Torch: F6TC spark plugs, with a clearance of: 0.027-0.0.31 in. The engine runs on a minimum 87+ unleaded gasoline (10%003e ETHANOL recommended)..
  • SAFETY & WIDELY APPLICATIONS - Built-in Force Air-Cooled and Splash Lubrication System, keeping the motor cool during extended use of time and ensure the operator's safety. A low oil shutoff functionality turns the engine off to prevent serious damage or failure. It's the perfect replacement engine for a pressure washers, cement mixers, compressors, mowers, log splitters, vacuums, tillers, water pumps, chipper/shredders and blowers..
  • GREAT REPLACEMENT - Our 420cc 15HP Horizontal Engine is a great replacem....
Check Stock

Diesel Engine 247CC 4 Stroke 5HP Single Cylinder Air Cooling Vertical Engine Motor Hand Start Direct Injection 3.6KW (Black, 173FA)

  • 【HIGH PERFORMANCE DIESEL ENGINE】247CC 4 Stroke Diesel Engine, equipped with self-injection diesel system, good atomization, low diesel consumption, more punctual diesel injection, and long service life. Widely Applicable for road cutting machine, grinding machine, water pump, micro tiller, air conditioning compressor, micro tiller, etc..
  • 【RELIABLE COOLING DESIGN】Strengthen thickening aluminum alloy box, fast heat dissipation, low oil temperature, light weight. Through advanced software analysis and optimized design, the reliability of the diesel engine in terms of structure and cooling is ensured..
  • 【EASILY SPEED CONTROL】Comes with a speed control handle, it can be positioned at any speed, equipped with throttle cable mounting seat, and can install throttle cable according to needs. Compact structure, small size and light weight. Compared with gasoline engines, it is more economical and lighter..
  • 【SUPERIOR DIESEL SYSTEM】Large capacity diesel tank, enhanced thickening, large diesel tank volume, special painting process, seam welding, and oil leakage. Optimize the diesel system and intake and exhaust systems to save energy and diesel..
  • 【MAIN PARAMETERS】Displacement: 247CC, Rated power: 3.6KW, Engine speed: 3600 RPM, Cooling mode: Air coo....
Check Stock

X-PRO Long Case 150cc 4-stroke GY6 Air cooled Moped Scooter Engine with CVT Automatic Transmission, Electric/Kick Start…

  • 【Parameters】Engine type: Gy6 single-cylinder four-stroke, engine oil type: Sf15w-40 without oil, carburetor type: pd24j, carburetor type: horizontal vacuum carburetor, spark plug type: a7tc, ignition type: cfw, cooling: air cooling, oil number: >=87#, compression ratio: 9.2:1, clutch: shoe type automatic centrifugal dry clutch, transmission: cvt, ignition system: Cdi, starting method: electric/kick.
  • 【Specification】 Displacement: 150cc, maximum power (Kw/R/Min): 6kw/7500r/Min, rated power (Kw/R/Min): 5.2kw/7000r/Min, maximum torque (Nm/R/Min) : 7.6nm/6500r/Min, minute steady idle speed 1600±150r/Min, piston diameter: 57.4mm, piston stroke: 57.8mm, bore and stroke 2.26" X 2.28" (57.4mm X 57.8mm), lubrication capacity: 0.26 gallons (1200ml), cylinder working volume: 0.03 gallons (149.6ml), speed: 8 poles.
  • 【Features】 Large-flow oil pump: reduce friction pair wear and prolong engine service life.
  • aluminum cylinder head and cylinder block: improve heat dissipation, reduce weight, and increase engine torque.
  • crankshaft: engine low-speed high torque, crankshaft connecting rod adopts large diameter bearing, Increase the reliability of the bearing.
  • lubricating oil filter: help to remove solid pollutants in the lubricating oil, greatly reduce the wea....
Check Stock

150CC GY6 Complete Engine Motor, 4 Stroke Single Cylinder Long Case Engine Motor Kit for Scooter ATV Go Kart CVT CFW + CDI (USA STOCK)

  • ☀【Engine Specifications】Engine Type: GY6 Single Cylinder 4-Stroke.
  • Engine oil type: SF15W-40 not come with oil.
  • Carburetor Type: Horizontal Vacuum Carburetor.
  • ☀【CVT design】CVT is mainly composed of 2 transmission belts and 2 transmission pulleys. It adopts a compact and simple design, which can seamlessly switch between an unlimited number of different gear ratios to achieve smooth acceleration..
  • ☀【Lubricating oil filter】Helps to remove solid pollutants in the lubricating oil, greatly reducing the wear of the friction pair and prolonging the service life of the engine. High-flow Oil Pump: Reduces the wear of friction pairs and prolongs the engine service life..
  • ☀【Forced air-cooled engine】The outside of the cylinder is covered with metal fins. When the cooling fan blows air over the fins, the heat generated by the engine is directly released into the air. It has the advantages of simple structure, light weight, wide adaptation to climate change, quick start-up, and no need of radiator..
  • ☀【Logistics and Service】Sometimes the carrier is not very good at taking care of our packages, so it may cause some damage in trans....
Check Stock

LCGP 800ml Cooling Catch Bottle Aluminum Radiator Coolant Tank Black Overflow Oil Catch Tank for Universal Car

  • OVERFLOW OIL CATCH TANK: Improve the cooling efficiency of the water tank. Save the cooling systems of your car. And keep the engine within the operational temperatures to improves its performance..
  • MATERIAL&SIZE: The radiator coolant tank is made of high quality T6061 aluminum, and anodized polished. These make the radiator coolant tank more durable and anti-corrosive. And the volume of the cooling catch bottle is 800ml, height 8.27”, bottom diameter is 2.96”, the length of hose is 39.37”..
  • Application: Our coolant overflow tank bottle can fit for most vehicle. It’s used in the cooling system of your car to save the cooling system from rust. Also protects the necessary components from oil..
  • WORKING PRINCIPLE: When the engine works, the coolant in the radiator will sealed through the pressure cap and flows through the hose into our cooling catch bottle. And when the radiator cools, the coolant in the cooling catch bottle recycle back into the radiator..
  • INSTALL AND WARRANTY: Install the bottle in the car’s pipe, away from the heat source, connect the bottle to the radiator with a hose. We provide this overflow oil catch tank have 1-year warranty. Our customer service will try our best to help you..
Check Stock

Xtensi Engine Oil Cooler and Oil Filter Housing Adapter Assembly Compatible With 2011-2013 Jeep, Chrysler 200/300,Dodge Journey Charger Caravan 3.6L Aluminium, Replaces 5184294AE

  • Oil Filter Housing Adapter is not a genuine part, it is a direct replacement and will fit, work and look exactly like the factory part. Replace Part Number: 5184294AE. Please check the part number before purchase..
  • Only for 3.6L 6 cyl engine. Compatible with 6 cyl 3.6L engine 2011-2013 Chrysler 200, 2011-2013 Chrysler 300 V6 3.6L, 2011-2013 Chrysler Town and Country V6 3.6L, 2011-2013 Avenger V6 3.6L, 2011-2013 Challenger V6 3.6L, 2011-2013 Charger V6 3.6L, 2011-2013 Journey V6 3.6L, 2011-2013 Caravan V6 3.6L, 2011-2013 Durango V6 3.6L, 2011-2013 Grand Cherokee V6 3.6L, 2012-2013 Wrangler V6 3.6L, 2013 Ram 1500 V6 3.6L, 2012-2013 Ram C/V Base V6 3.6L..
  • Advantage: Keep the engine oil clean and cool. This replacement oil cooler housing comes with a new pre-installed oil filter, it allows the engine oil to be strained through the filter and remove foreign particles to keep your engine running clean. Beside that, it also cool down the oil that enters the engine. Direct replacement. Fluorocarbon and HNBR sealing rings are resistant to oil, abrasion and temperature..
  • The oil cooler is made of lightweight aluminum alloy, has 16-plate (8 plate thick and 8 plate thin), can be better cooling. Oil filter housing adapter oil cooler kit comes with a complete set of ....
Check Stock

MOTOOS 80CC 24' 26' 28' 2 Stroke Bike Bicycle Motorized Cycle Engine Motor Kit (Red)

  • Single Cylinder, Air-Cooling, 2-Stroke Gasoline Engine. This 2-stroke 80cc engine kit is perfect to upgrade the regular bike to a motorized bike, which allows you to enjoy riding at a faster speed, which can reach 38km/h as fast as a motorcycle or scooter..
  • The bicycle engine kit is designed for users who want to retrofit and upgrade a bicycle. Suitable for most 26" and 28" bicycles with V-frames. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1")..
  • Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km..
  • Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
  • Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km..
  • Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
  • The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully..
Check Stock

6.0L Powerstroke Oil Cooler Flush Kit,Blue Anodize Adapter Flush Adapter for Ford 2003 2004 2005 2006 2007 2008 2009 2010 Diesel

  • Made of by high quality aluminum and Brass,prevent high oil temperature result in costly fuel systems and engine failure.Instead of spending a high price to replace the 6.0-liter oil cooler, it is more appropriate to spend a little free time to clean it. And our products can be used repeatedly..
  • With our 6.0L Power Stroke Oil Cooler Flush Kit, the oil cooler can be backflushed in less than an hour. By directing the water flow in the opposite direction of normal travel, contaminants are removed and, in most cases, the cooler is restored to new effectiveness..
  • No need to remove the plant cooling manifold. Coolant enters the cooler from the oil cooler, and when disturbed, the quick connection hose between the oil cooler and the cooler will usually start to leak, resulting in rewinding. Our device will not interfere with the original connection..
  • It is advisable to regularly monitor the Delta T (difference between oil temperature and coolant temperature) while operating the engine under load. If the temperature difference exceeds specification we recommend performing an oil cooler flush. Careful attention to this detail can prevent thousands of dollars of engine and fuel system damage. In the case of a cooling system that has experienced extreme neglec....
Check Stock

CGOLDENWALL 1200W Household Commercial Automatic Oil Press Machine Nuts Seeds Oil Presser Pressing Machine Cold Press Hot Pressing machine Stainless Steel with industrial motor 110V

  • ... material contains water, it needs to be fried to dry enough and then squeezed..
  • [HEAVY DUTY 1200W INDUSTRIAL MOTOR]- The high-performance industrial motors provide stable working power and ensure that the machine runs continuously for 24 hours. And the service life of the engine is up to 15 years. Besides, the equipped stainless steel high-speed plasma pressing rod highly promotes oil yield..
  • [CONSTANT TEMPERATURE AUTOMATIC HEATING]- The machine automatically heats up to a constant temperature, and dry materials can be placed directly on the pressing machine. No additional frying is required, and there is no soot in the oil pressing process..
  • [DOUBLE BOTTOM COOLING SYSTEM]- In addition to the cooling system that comes with the engine itself, the lower part of the machine is also equipped with a forced air cooling system: a dual cooling system that can run continuously in the summer..
Check Stock

Jobs USA Search

  • 【Compatible】Engine oil cooler fits for 3.6L V6 engine. Replacement part number is 5184294AE. Before ordering, please confirm whether the accessories are suitable for your vehicle. 2011-2013 dodge journey.
  • 【Advantage】The oil cooler uses 8 layers of thickened aluminum and 8 layers of thin aluminum, thick and thin cross double layer design, can cool the oil into the engine, with superior cooling rate.
  • Oil filter housing comes with a new high quality pre-installed oil filter, it allows the engine oil to be strained through the filter and remove foreign particles to keep your engine running clean..
  • 【High-quality Sensors】Our sensors are oil temperature sensors, fluid temperature sensor and oil pressure sensors that meet professional specifications. Using professional ultrasonic welding technology, as well as the sensor threads have been made thread adhesive sealing t....
Check Stock

SUNROAD 80cc Bicycle Engine Kit 24″ 26″ 28″ 2-Stroke Motorized Bicycle Petrol Gas Engine Kit Red

  • Single Cylinder, 2-Stroke Gasoline Engine. Air-Cooling,Equipped with the 2-stroke 80cc single cylinder gasoline engine, our bike motor kit is suitable for most bikes with v-frame. It will better upgrade your regular bike to a motorized bike and let you enjoy the fun of riding..
  • The bicycle engine kit is designed for users who want to retrofit and upgrade a bicycle. Suitable for most 26″ and 28″ bicycles with V-frames. The frame should have 9-11″ of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1″)..
  • Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km..
  • Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
  • Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km..
  • Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
  • The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully..
Check Stock