Top Waveguide Parts - BuyWiseBest.com

Waveguide Covers for Microwave Juerly 4 Pack Mica Plates Sheets Heat Insulation Board for Universal Microwave Oven Repairing Part - Cut to Size 5.1x 5.1inch

【Nice Home Accessory】These mica plates sheets aimed to send radiation from the magnetron to the cooking chamber, to prevent food particles, steam....
【Good Quality Material】If the waveguide cracks , just replace it and you could use your microwave again. Our microwave waveguide cover is made of....
【Easy To Use】It's easy to trace and cut out. Simple replacement by using the old mica wave guide cover as a template while marking the....
【Wide Applications】As a kind of heat resisting and insulating product, this microwave oven repairing part is widely applied for home appliances....
【Package Includes】You will receive 4 pieces mica plates sheets in 13X13 cm/5.11X5.11 inch size, you could cut it into any size to fit your....

Bundle Includes: 2 x JBL 308P MkII Powered 8-Inch Two-Way Studio Monitor, JBL LSR310S 10-Inch Powered Studio Subwoofer with XLF, 2 x Knox Gear 25-Feet XLR Male to XLR Female Microphone Cable and 2 x Focus Camera by Kirlin 1/4-Inch TRS to 1/4-Inch TRS Cable (6-Feet).
Broad Sweet Spot: Neutral frequency response across a wide area allows you to fine-tune your mix even while listening off-axis.
Transducers: Updated HF and LF transducers: new design improvements result in optimized damping for superior transient response and impressive deep bass with lower harmonic distortion.
Image Control Waveguide: Patented Image Control Waveguide creates a stunning soundstage with precise imaging and depth, a wide sweet spot and neutral response in any room.
Reliable: Strenuous 100-hour full-power test ensures years of reliability.

Bundle Includes: Two JBL 306P MkII Powered 6-inch Two-Way Studio Monitors.
High-quality: JBL 306P MkII has been equipped with acclaimed 3 Series transducers that now perform even better. Hear deep, accurate, and tightly controlled bass, thanks to a long-throw 6.5-inch woofer and the patented JBL Slip Stream low-frequency port.
Dynamic Range: With 112 watts of total power, the dual, integrated Class-D power amplifiers, custom-designed by JBL for each transducer, give you a generous dynamic range for any project.
Powerful Drivers: From music production and podcasting to cinematic sound design or daily vlogging, enjoy the output and power you need to hear exceptional detail at any volume - even at peak SPL. Simply plug in, power on, and start creating.
Image Control Waveguide: Reveal impressive detail, ambience, and depth in your mixes with JBL 3 Series’ groundbreaking Image Control Waveguide.

...4 mm (2.5 in) diameter edgewound ribbon voice coil for greater efficiency and power handling. JBI 2414H-C 25 mm (1 in) polymer diaphragm compression driver.
Advanced network topology crossover design. High-voltage capacitors and inductors with massive cores and heavy gauge wire. Progressive Transition high frequency waveguide. 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure.
SonicGuard protects the high frequency driver from excess power without interrupting the performance. Non-resonant, all-steel handles. 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10. Details: Power Rating : 500 W / 2000 W.
Frequency Range (-10 dB) : 42 Hz - 18 kHz. Frequency Response (3 dB) : 62 Hz - 13 kHz. Sensitivity (1w/1m) : 100 dB SPL. Nominal Impedance : 4 ohms. Recommended Amplifier Power : 500 W to 1000 W into 4 ohms. Maximum SPL : 133 dB. Nominal Dispersion : 90 x 50. Crossover Frequency : 2.2 kHz.
Dimensions (H x W x D) : 1092 mm x 464 mm x 432 mm (43 in x 18.3 in x 17 in). Weight : 42.6 kg (94 lb). High Frequency Driver : JBI 2414H-C , 1" exit compression driver mounted on Progressive Transition Waveguide. Low Frequency Driver : JBI M115-8A x 2.

.... JBI 12 in low frequency driver with a 64 mm (2.5 in) diameter edge wound ribbon voice coil. JBI 2414H-C 25 mm (1 in) polymer diaphragm compression driver. Advanced network topology crossover design.
High-voltage capacitors and inductors with massive cores and heavy gauge wire. Progressive Transition high frequency waveguide. 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure. SonicGuard protects the high frequency driver from excess power without interrupting the performance..
Non-resonant, all-steel handles. 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10. Specifications: Power Rating : 250 W / 1000 W. Frequency Range (-10 dB) : 60 Hz - 20 kHz. Frequency Response (3 dB) : 80 Hz - 18 kHz.
Sensitivity (@1m) : 98 dB SPL (1w/1m). Nominal Impedance : 8 ohms. Recommended Amplifier Power : 250 W to 500 W into 8 ohms. Maximum SPL : 128 dB. Nominal Dispersion : 90 x 50. Crossover Frequency : 2.1 kHz. Dimensions (H x W x D) : 584 mm x 399 mm x 325 mm (23 in x 15.7 in x 12.8 in).
Weight : 19.5 kg (43 lb). High Frequency Driver : JBI 2414H-C 1" exit compression driver mounted on Progressive Transition Waveguide. Low Frequency Driver : JBI M112-8. Input Connectors : Neutrik Speakon NL-4 (x1).

Perfect combination of style and performance.
The integrated WaveGuide focuses the high frequency sound for dynamic, true-to-life reproduction.
PREMIUM PERFORMANCE: The 1” soft dome tweeter provides smooth, refined high frequencies..
Wood grain accents give a handcrafted, natural look..

TNF tweeter with Poron suspension for smoother sound.
RMS Output Power: 25W, Max Power Handling: 120W.
Urethane tweeter plate with waveguide for improved horizontal directivity and sound image.
Ultra-rigid MDF construction and non-parallel side panels for very little vibration and neutrality.

TNF tweeter with Poron suspension for smoother sound.
Urethane tweeter plate with waveguide for improved horizontal directivity and sound image.
Ultra-rigid MDF construction and non-parallel side panels for very little vibration and neutrality.