Top Weld Monitor

Weld on Filler Cap, KIMISS Aluminum Alloy Weld On Oil Tank Filler Neck with Cap Filler Neck 1.5'' 1 1/2'' OD for Fuel Tanks Weld In Fuel Cell Cap Weld On Fuel Cap Fuel Filler Neck Aluminum Fill Cap

  • Scope of application: Weld On Billet Caps Aluminium Weld on Filler Neck does not need to be replaced frequently, with strong practical and durable. The filled neck with cover is suitable for oil tank, fuel tank, water tank, dry tank, etc. It is a high-quality, quality-guaranteed auto parts, and Fuel Filler Neck And Cap is your best purchase choice..
  • Product function: Weld On Fill Cap Fuel Filler Neck has smooth finished design, come with a O-shaped sealing ring and a natural aluminium screw on cap. Weld on Cap meets aviation hose fitting requirements, precision m....
Check Stock

Seagate Exos X20 20TB SATA HDD SATA 6Gb/s 7200 RPM (ST20000NM007D) (2 Pack) (Renewed)

  • Highly reliable performance with enhanced caching, making it the logical choice for cloud data center and massive scale-out data center applications.
  • Maximize total cost of ownership savings through lower power and weight with helium sealed-drive design.
  • Proven helium side-sealing weld technology for added handling robustness and leak protection.
  • Digital environmental sensors to monitor internal drive conditions for optimal operation and performance.
  • Manufacturer Recertified, 2 Year Warranty.
Check Stock

Secrets of Silicon Valley

  • J-B WELD WATERWELD: A hand mixable two part epoxy putty stick, that can cure under water and is ideal for repairing plumbing, fuel tanks, tubs and showers, drains, pool and spa, boats & potable water tanks and more! J-B Weld WaterWeld is certified by the NSF and is safe for contact with potable water..
  • CURE AND SET TIME: After kneading the two part formula together by hand, WaterWeld takes 25 minutes to set and cures in 1 hour. J-B Weld WaterWeld set and cure color is off white..
  • PRODUCT FEATURES AND STRENGTH: J-B Weld WaterWeld has lap shear strength of 1300 PSI, can withstand continuous temperatures up to 300F (149C) and intermittent temperatures of 350F (176 degrees Celsius) and is chemical resistant against petroleum, hydraulic fluids and other chemicals when fully cured..
  • SURFACE APPLICATIONS: Iron & Stainless Steel, Copper & Brass, Aluminum & Bronze, Fiberglass and Plastic & PVC..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performanc....
Check Stock

J-B Weld ClearWeld 14ml w/Static Mixer, (50114H)

  • J-B Weld ClearWeld: A clear, quick setting and multipurpose two part epoxy that provides a strong and lasting bond on surfaces including metal, tile, most plastics, ceramic, glass, wood and more. J-B Weld ClearWeld comes in a syringe allowing for an easy 1:1 mix ratio. The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses!.
  • Cure and Set Time: After mixing the two part formula with the included mixing tray and stir stick, ClearWeld takes 5 minutes to set and 1 hour to cure. J-B Weld ClearWeld set and cure color is clear..
  • Strength: J-B Weld ClearWeld has tensile strength of 3900 PSI..
  • Surface Applications: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile, Fiberglass and Glass..
  • Do it Yourself: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

Spot Weld Cutter Set Double Sided 14 Pcs,3/8" HSS Spot Weld Cutter Remover Drill Bits Hex Sheet Metal Hole Cutter Remover Kit for Power Drill Spot Welding, by NAKAO

  • ◆【Fit for】 : sharp double-sided blades, made of high-quality heat-resistant and thick steel. The perfect tool can remove the spot-welded panel or metal plate without distorting the metal or damaging the panel below, thereby reducing skid welding and The need to break the weld. efficient. Suitable for thin stainless steel plate, iron plate, aluminum plate, F.R.P or other thin metal plates..
  • ◆【Material】: The preferred material is made of high-quality steel with excellent heat resistance, high hardness and wear resistance. The drill center pin is spring type.The diameter of the cutting blade is 3/8 inch, and the shank is a standard 1/4 inch size.with a flat shank to eliminate rotation in the chuck..
  • ◆【Easy separation】 The spot welding cutting machine drill bit can easily separate the spot welding plate without distorting the metal plate. Separate spot welding of sheet metal, panels, etc., and cut out small inspection holes. Also known as: spot weld drill bit, spot weld bit, spot weld cutter drill bit, spot weld drill cutter, spotweld drill bits, spot weld cutter, Rotary Spot Weld Cutter Sets Double Sided, Power Drill Spot Welding.
Check Stock

J-B Weld ClearWeld 5 Minute Epoxy, Clear, Syringe, 2 Pack, 50112-2

  • J-B Weld ClearWeld: A clear, quick setting and multipurpose two part epoxy that provides a strong and lasting bond on surfaces including metal, tile, most plastics, ceramic, glass, wood and more. J-B Weld ClearWeld comes in a syringe allowing for an easy 1:1 mix ratio. The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses.
  • Cure and Set Time: After mixing the two part formula with the included mixing tray and stir stick, ClearWeld takes 5 minutes to set and 1 hour to cure. J-B Weld ClearWeld set and cure color is clear..
  • Strength: J-B Weld ClearWeld has tensile strength of 3900 PSI..
  • Surface Applications: Metal, Most Plastics, PVC, Wood, Concrete, Ceramic & Tile, Fiberglass and Glass..
  • Do it Yourself: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

HZXVOGEN MIG Welder 100V/220V 200Amp Weld Aluminum Wider LCD Display Smart Control IGBT Inverter MIG Stick TIG Mix Gases Gasless Flux Cored Solid Core Wire Welding Machine Model HBM2280

  • THE MOST ADVANCED MULTIFUNCTIONAL WELDER - HZXVOGEN HBM2280 MIG welder with wider LCD displayed, it is a smart control welder. It is super easy and....
  • CAN WELD ALUMINUM - This welder can weld aluminum, iron, carbon steel, stainless steel, etc. This mig welder came with qualify accessories: MB24 Mig....
  • MIG FUNCTION - 1. MIX GAS can use 0.6/ 0.8/ 0.9/ 1.0mm flux wire. When using 0.6/ 0.8/ 0.9mm wire, it can weld 0.7 ~ 3.4mm thickness. When using 1.0mm....
  • TIG FUNCTION - Can use 1.6mm and 2.4mm tungsten.When using 1.6mm tungsten can weld 0.7 ~ 4.8 thickness, using 2.4mm tungsten can weld 1.2 ~ 6.4mm....
  • MMA FUNCTION - Current 10 ~ 170 amp. Can weld 2.5/ 3.2/4.0mm electrode. Using 2.5/ 3.2mm rods, can weld 1.6 ~3.4mm thickness. Using 4.0mm rods, can....
Check Stock

J-B Weld 50132 PlasticWeld Quick-Setting Epoxy Syringe - Translucent Yellow - 25 ml

  • J-B WELD PLASTICWELD: A quick setting and multipurpose two part epoxy that provides a strong and lasting bond on various plastic surfaces (Plastic & PVC, Fiberglass, Glass, ABS, Composites and Vinyl). J-B Weld PlasticWeld comes in a syringe allowing for an easy 1:1 mix ratio. The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses!.
  • CURE AND SET TIME: After mixing the two part formula with the included mixing tray and stir stick, PlasticWeld takes 5 minutes to set and 1 hour to cure. J-B Weld PlasticWeld set and cure color is Translucent Yellow..
  • STRENGTH: J-B Weld PlasticWeld has tensile strength of 3900 PSI..
  • SURFACE APPLICATIONS: Plastic & PVC, Fiberglass, Glass, ABS, Composites and Vinyl..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

J-B Weld 8277 WaterWeld Epoxy Putty Stick - 2 oz.

  • J-B WELD WATERWELD: A hand mixable two part epoxy putty stick, that can cure under water and is ideal for repairing plumbing, fuel tanks, tubs and showers, drains, pool and spa, boats & potable water tanks and more! J-B Weld WaterWeld is certified by the NSF and is safe for contact with potable water..
  • CURE AND SET TIME: After kneading the two part formula together by hand, WaterWeld takes 25 minutes to set and cures in 1 hour. J-B Weld WaterWeld set and cure color is off white..
  • PRODUCT FEATURES AND STRENGTH: J-B Weld WaterWeld has lap shear strength of 1300 PSI, can withstand continuous temperatures up to 300F (149C) and intermittent temperatures of 350F (176 degrees Celsius) and is chemical resistant against petroleum, hydraulic fluids and other chemicals when fully cured..
  • SURFACE APPLICATIONS: Iron & Stainless Steel, Copper & Brass, Aluminum & Bronze, Fiberglass and Plastic & PVC..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

2 Pcs M18x1.5 Thread Adapter, 304 Stainless Steel

  • 【Material】The mounting bung is made of stainless steel(Stainless Steel 304 for corrosive environments, rigid and durable body design), easy to weld on O2 sensor parts, exhaust, headers, down pipes, etc..
  • 【Installation】Install the weld bungs to replace or add sensor ports to any OEM or aftermarket exhaust or downpipe. Drill a hole and weld the mounting bung on..
  • 【Size】M18X1.5 thread adapter, confirm the product size before buying..
  • 【Parameter】Use for your custom sensor install, exhaust, down pipe, headers, exchangers and other installations where weld-in or weld-on metric connection is needed..
  • 【Package include】 2 PCS M18 Mounting Adapter. It comes with 1 year warranty. Any problems just contact us to resolve..
Check Stock

J-B Weld 8217 TankWeld Gas Tank Repair - 1 oz.,Dark Grey

  • J-B WELD TANKWELD: A hand mixable, steel reinforced two part epoxy putty stick that is formulated to repair and rebuild various holding tanks. J-B Weld TankWeld is chemical resistant against petroleum, hydraulic fluids and many other harsh chemicals once fully cured. TankWeld is certified by the NSF and is safe for contact with potable water..
  • CURE AND SET TIME: After kneading the two part formula together by hand, it takes 5 minutes to set and cures in 1 hour. J-B Weld TankWeld set and cure color is dark grey..
  • PRODUCT FEATURES AND STRENGTH: J-B Weld TankWeld has lap shear strength of 900 PSI. TankWeld can be molded, shaped, sanded, drilled and tapped..
  • MAJOR USES: Fuel tanks, metal radiators, metal fuel or chemical tanks, metal housings and stripped threads. Surface applications include: iron, stainless steel, copper, brass, aluminum, and bronze..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

HITBOX 200A ARC Welder Alkaline Electrode Weldable, 110V 220V 2 IN 1 Lift TIG/MMA VRD Continuous Welding Machine Fits Below 1/8' 4.0 mm Welding Rods,Hot Start Welder for Outdoor Home Industry Use

  • Unique arc welder with lift function-Usually, arc welders can only weld carbon steel, alloy steel, mild steel, and zinc plated pipes. With lift tig capability, our MMA-200 can weld these materials as well as stainless steel. Most electric welders display a current of 200 A, but the actual current may be only about 100 to 140 A. The current of this product can reach up to 200A, and it can handle alkaline welding rods! !!.
  • Weld more types of rods-As you know, it is difficult to weld 7018 and cellulose rods with an arc welder with low no-load voltage. To meet the needs of our customers who weld these rods, we increase the no-load voltage of this welder to 78V. Now you can weld other common rods such as 7018 cellulose rods and 6013J422. You can weld 2.5mm 3.2mm rods for a long time, drag solder or weld 1/8" 4.0mm rods for 1-2 hours.
  • 110V 220V Dual Voltage Arc Welder-This welding machine is 110V 220V and comes with a 35-50mm² quick connector, which can withstand higher current than other connectors. This feature allows the welder to work longer.Because of the high current, extending the weld cable to 50 meters does not attenuate the current..
  • 60% duty cycle, longevity-The rated duty cycle of HITBOX MMA200 is 85% for arc welding and 50% for TIG welding. Auto....
Check Stock