Top Weld on Tip

Borla 20248 Exhaust Tip

  • Tip Style: Single round rolled angle cut resonated.
Check Stock

Weld-on 16-Gauge Precision Syringe Applicator for Weld-on 16 Acrylic Solvent Cement

  • Stainless Steel 16 gauge Blunt Needle tip.
  • For use with Weld-on #16 medium bodied acrylic solver cement..
Check Stock

2.5 Inch Inlet Exhaust Tip, LCGP 2.5' Inlet x 4' Outlet x 18' Overall Length Weld On Universal Stainless Steel Polished Diesel Exhaust Tailpipe Tip 2 Pcs

  • 2.5 inch inside diameter inlet, 4 inch outside diameter outlet, 18 inch overall length..
  • Rolled Edge & Angled Cut design for the look of performance..
  • High quality stainless steel infused with anti-corrosive agents that prevent your exhaust tip from rusting..
  • There is a small hole on bottom of tip to drain water, not easy to accumulate water and prevent rust..
Check Stock

RX WELD Upgrade version Oxygen & Acetylene Gas Cutting Torch and Welding Kit Portable Oxy Brazing Welder Outfit With Portable Tool Bag

  • 【OXY ACETYLENE TORCH KIT】Our Oxygen Acetylene Torch Kit for Welding and Cutting is a 15 piece kit that comes in a heavy-duty plastic blow-molded case for easy storage and transportation.
  • Whether you are an amateur metalworker or a seasoned professional, this gas welding torch kit is easy to use and allows you to cut, weld, braze, and solder with precision and efficiency.
  • 【Outstanding Performance】The oxygen & acetylene welding kit enables you to cut up to 6” and weld or braze up to 1/2” with appropriate tips. Full 2 1/2” diam high capacity oxygen and acetylene regulators provide optimal performance. Acetylene Tank Connector: CGA-510 Fits all Acetylene Cylinders EXCEPT Sizes MC and B.
  • Oxygen Tank Connector: CGA-540 Fits all American Oxygen Cylinders..
  • 【EASY TO USE】 To use this torch, attach the appropriate tip for your project, connect the oxygen and gas tank to the torch handle, and set the PSI to the necessary positions.
  • Once you have ignited and adjusted to a neutral flame, move the flame to the metal and push the valve handle slowly.
  • Move the torch tip slowly along the line of your cut until the metal has fully parted.
Check Stock

SÜA 25 Series Gas Welding & Cutting Kit Oxygen Torch Acetylene Welder Outfit

  • Medium/Heavy Duty Oxy-Fuel Welding & Cutting Outfit Compatible with Harris.
  • 25HX Series Oxygen and Acetylene Regulators. Torch Handle and Cutting Attachment Compatible with Harris. Can also be used with Oxygen-Propane using 6290-NX Series Propane Tips..
  • Included Acetylene Cutting Tip: 6290AC Size#2, (Can also use 6290 Series). Included Welding Tips: 23A90 Series #1, #3 and #5 with E-43 Mixer..
  • Can cut up to 1-1/2” with provided cutting tip and up to 6” with additional larger tips. Can weld up to 1/8” with provided welding tips and up to 1/4” with additional larger tips..
  • Accessories: 15 ft. Carrying bag, Twin Welding Hose, Tip Cleaner, Goggles, Spanner and Lighter.
Check Stock

1 X 10-inch Hand Auger Wood Dril, Hexagon Embedded Welding Bushcraft Hand Auger Wrench Scotch Eye Auger Manual Bushcraft Auger Set w/Leather Case Survival Tools -by MinliGUY

  • [Upgraded Welding Scotch Eye Wood Auger Not Easy to Break] Embedded weld which increases the weld area and makes the weld of scottish eye and bushcraft drill more sturdy..
  • [Sharp Scottish Eye Save Effort to Cut]The edge thickness of the bushcraft auger scotch eye is 1/64" hammering it into the wood easier and faster suitable for the hole you drill in the project.
  • [Processed with Hardening Quenching]MinliGUY long scotch-eyed auger bit is made of high-quality hardened carbon steel with super strong high-temperature hardness making this bushcraft auger tool not easy to deform when cutting or drilling..
  • [Sharp Bit& Cutting Edges]The tip of the manual wood drill bit dowels the drill down into the wood with ease. The cutting edge of the bit is professionally ground sharp and clean without burrs..
  • [Package Details]Coming with 1"*10" survival wood drill& 1 protective cover& 1 blow fire tube& 1 portable PU leather case. Commonly used for camping backpacking hiking etc..
Check Stock

FlashFix Refill Kit | UV Cured Liquid Plastic Super Adhesive Refill Kit

  • CREATES A STRONG, FLEXIBLE BOND. FlashFix Liquid Plastic Adhesive uses UV light to create a strong, flexible bond within seconds. It can be sanded, painted and customized. Perfect for worn phone cords, broken household items, arts & crafts, jewelry making, laminating decals and much more. Suitable for indoor and outdoor use. Works on a wide variety of materials..
  • CURES IN SECONDS. Unlike traditional super glue and epoxy, you remain in control. It will not bond or cure until you activate the adhesive with the UV light. Once activated, the clear UV glue quickly turns into a strong and durable plastic weld. FlashFix Liquid Plastic Adhesive is water resistant, works between -40°F and 300°F, and won’t yellow over time..
  • QUICK AND EASY REPAIRS. FlashFix Liquid Plastic Adhesive is a good alternative for applications where super glue and other bonding products may fall short. Use it to fill, seal, or weld -- and so much more. This plastic welding and UV glue kit is a useful product to have in any household..
  • PRECISION TIP RESISTS CLOGGING. FlashFix Liquid Plastic contains no solvents and will not dry out like traditional epoxy or super glue. This gives you much more control and helps avoid waste..
Check Stock

Weld-on 16-Gauge Precision Syringe Applicator for Weld-on 16 Acrylic Solvent Cement - Pack of 3

  • Stainless Steel 16 gauge Blunt Needle tip.
  • For use with Weld-on #16 medium bodied acrylic solver cement..
Check Stock

2 Pcs 2.5" Inlet Exhaust Tips, LCGP 2.5" Inlet x 4" Outlet x 17" Overall Length, Weld On, Polished, Universal Stainless Steel Diesel Exhaust Tailpipe

  • 2.5 inch inside diameter inlet, 4 inch outside diameter outlet, 17 inch overall length..
  • Polished surface treatment, high temperature resistance, not easy to scratch, and the paint is not easy to fall off..
  • High quality stainless steel infused with anti-corrosive agents that prevent your exhaust tip from rusting..
  • There is a small hole on bottom of tip to drain water, not easy to accumulate water and prevent rust..
Check Stock

Weld on Filler Cap, KIMISS Aluminum Alloy Weld On Oil Tank Filler Neck with Cap Filler Neck 1.5'' 1 1/2'' OD for Fuel Tanks Weld In Fuel Cell Cap Weld On Fuel Cap Fuel Filler Neck Aluminum Fill Cap

  • Scope of application: Weld On Billet Caps Aluminium Weld on Filler Neck does not need to be replaced frequently, with strong practical and durable. The filled neck with cover is suitable for oil tank, fuel tank, water tank, dry tank, etc. It is a high-quality, quality-guaranteed auto parts, and Fuel Filler Neck And Cap is your best purchase choice..
  • Product function: Weld On Fill Cap Fuel Filler Neck has smooth finished design, come with a O-shaped sealing ring and a natural aluminium screw on cap. Weld on Cap meets aviation hose fitting requirements, precision m....
Check Stock

AWLOLWA Oxygen Acetylene Torch kit Medium Duty Cutting Torch and Welding Kit (Blue)

  • 【Oxy Acetylene Torch Kit】 The welding & cutting torch set are made of high-quality materials, which are durable to be your long-term choice. Whether you are an amateur metalworker or a seasoned professional, this gas welding torch kit is easy to use and allows you to cut, weld, braze, and solder with precision and efficiency.
  • 【Precision Design】The oxy acetylene torch kit enables you to cut up to 6” and weld or braze up to 1/2” with appropriate tips. Full 2 1/2” diam high capacity oxygen and acetylene regulators provide optimal performance. Acetylene Tank Connector: CGA-510 Fits all Acetylene Cylinders EXCEPT Sizes MC and B.
  • Oxygen Tank Connector: CGA-540 Fits all American Oxygen Cylinders..
  • 【Easy To Use】 To use this torch, attach the appropriate tip for your project, connect the oxygen and gas tank to the torch handle, and set the PSI to the necessary positions.
  • Once you have ignited and adjusted to a neutral flame, move the flame to the metal and push the valve handle slowly.
  • Move the torch tip slowly along the line of your cut until the metal has fully parted.
  • 【Versatile Use】Oxygen and acetylene fuels can be used in various types of portable welding, rivet cutting, soldering, brazing, surface hardening and metal heating processes.....
Check Stock

BLACKHORSE-RACING Universal Dual Exhaust Tip Straight Cut 2.5' Inlet 3.5 Inch Outlet 10.5' Length Polished Stainless Steel Silver Single Layer Staggered Tailpipe

  • Dimension: Inlet: 2.5″ (63mm), Outlet: 3.5″ (89mm), Width: 7.25″ (184mm), Total length: 10.5″ (265mm).
  • Material: Made of Polished Stainless steel, durable and anti-corrosive..
  • Feature: Duo Outlets – Straight Tip – Weld-On – Single Layer.
  • Wide Application: Universal fit for Most Vehicles With 2.5″ Diameter Inlet Size Only (Note: Please Refer Dimension To Make Sure It Will Fit Before Purchasing).
  • Install: Pack of 1 dual exhaust tip. Professional installation is highly recommended, No instruction included.
Check Stock