Top What Is An Ir Emitter Cable

DEMAO ir Repeater Kit ，ir Extender ，Infrared Repeater System Kit Remote Controls Home Theater Out of Sight .Control 1 DMIR0106TA Ir Repearter Kit

• ...l block , sold separately, will also be required that the IR receiver will then plug into..
• 3） Connection without having to install the software, simple and convenient for you to achieve Remote Control. This product allows you to control A/V equipment with your existing IR remote controller..
• 4）Use Double IR Emitter x 6pcs，expandable up to 12.Use Triple IR Emitter x 6pcs，expandable up to 18. .Home theater devices kept in a closed cabinet or in another room with this IR Infrared Remote Control Extender Repeater System. Additional IR Emitters sold separately . It is compatible with almost all the IR electronic appliances in the market with its wide frequency range 20 KHz to 60KHz , especially works with SKY set-top box and Cisco DVD player ( support RCMM code ) ..
• 5) PACKAGE INCLUDE: 1x IR Connecting Block, 4x IR Emitters , 1x Dual Band Mini IR Receiver, 1x Power Supply, 2x Mounting Screws and 1x Manual..

WenkeDigi IR Infrared Repeater System kit, IR Repeater Extender, Max 100 Feet Efficient Receiver Range - IR Remote Control Hidden Devices -10 Feet IR Receiver Cable (Can Run 400 Feet by Your Cat5e)

• This IR kit is a device that only passes on the infrared signal . It is used to control Four (4) IR devices out of sight that are kept in a closed cabinet or in anther room ( expandable up to 18, and 4 x single emitter provided in the package , Additional IR Emitters sold separately, One emitter one device ) . Strong Compatibly , It is compatible with almost all the IR electronic appliances like SKY STB and CISCO DVD player , SONY receivers ,Amplifier, Xbox, TV , Blu-ray player,etc with its wide frequency range 20 KHz to 60KHz ..
• Mini Block Size , Dual Sensors Mini Bar IR receiver , One Sensor 38KHz , the Other 56KHz, with long effective remote control distance up to 100 FEET @38KHz and 23 FEET at 56KHz , High sensitivity, Real time transmission without any delay . It allows you to control your home theater with your existing IR remote controller. NOTE : NOT support RF and Bluetooth Remote Control ..
• This IR Repeater system kit supplies with an ideal solution for those who want to conceal their A/V components equipment inside a entertainment system cabinet or closet door for a clean, stylish look. It makes it possible to control multiple IR devices while these are in a closed cupboard or in a remote location out of sight ..

ENSIGEAR IR Repeater Kit, ir repeater system，IR Remote Control Extender Remote ，Control 1 to 18Devices.IR Extender 100 Feet，20KHz-60KHz Dual Sensors Mini Receiver,Super compatibility

• ...l block , sold separately, will also be required that the IR receiver will then plug into..
• 3） Connection without having to install the software, simple and convenient for you to achieve Remote Control. This product allows you to control A/V equipment with your existing IR remote controller..
• 4）Use Double IR Emitter x 6pcs，expandable up to 12.Use Triple IR Emitter x 6pcs，expandable up to 18. .Home theater devices kept in a closed cabinet or in another room with this IR Infrared Remote Control Extender Repeater System. Additional IR Emitters sold separately . It is compatible with almost all the IR electronic appliances in the market with its wide frequency range 20 KHz to 60KHz , especially works with SKY set-top box and Cisco DVD player ( support RCMM code ) ..
• 5) PACKAGE INCLUDE: 1x IR Connecting Block, 4x IR Emitters , 1x Dual Band Mini IR Receiver, 1x Power Supply, 2x Mounting Screws and 1x Manual..

TNP IR Infrared Remote Control Extender Repeater Cable (8.2 Feet) - IR Signal Receiver & IR Emitter Blaster Extension Cable Wire Cord USB Powered System Kit

• IR remote control cable extends the signal to a video source like a Blu-ray player, DVD player, STB box, AV receiver or other A/V source with an infrared sensor so it can be controlled from your HDTV.
• Simple installation IR Repeater cable allows you to control home theater components located behind closet cabinet doors.
• Place the IR emitter blaster near the source sensor to repeat the signal to the source.
• Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
• IR Tx and Rx cables have adhesive circles on the back for mounting.
• USB powered IR extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
• Connect to an HDTV USB port or to a USB wall charger power supply (sold separately).
• Compatible with most A/V equipment with infrared sensors (not RF).

OBVIS IR Infrared Emitter Extender Cable Extension (10 Feet 3Meter) Single HeadEye 3.5mm

• IR emitter extension cable with single eye that is compatible with devices in 38khz(IMPORTANT).
• Plug into IR OUT port for use with infrared extender extension system, Xbox One, IR Connecting Blocks and Home Automation controllers.
• Comes with adhesive backing sticks directly onto different devices.
• Overall length of Infrared Emitter Extender: 10 feet (3 meter).
• Extend remote control ability to any room in the house, hidden Xbox One, AV receiver and other devices.

Sewell SW-32988 Direct BlastIR Wireless Pro IR Repeater, Remote Control Extender Kit (IR Emitter and Receiver),Black

• Note Some devices use RF instead of IR for remote control. The Blast IR Wireless Pro only works with IR devices. Please check the signal type of your remote to ensure it is IR before ordering. .Wireless Distance: 200m (650 ft.), distance may vary due to obstacles, IR Receiver Distance: 7m (30 ft.)Incompatibility : Yamaha HTR 6140, Arris DCX 3520E-M, OSD ATM-7 Speaker Selector.
• BlastIR Pro receivers are directional and require facing the receiver towards where you will be using the remote. To improve reception and widen the angle of control, we recommend using the included IR receiver cable connected to the main receiver unit..
• BlastIR Pro Emitters work best when placed within a few inches of the devices you want to control. For best results we recommend attaching the included optional IR emitter cables so that the emitter is directly over the IR receiver of up to two devices. These are designed to stick directly to the devices that you are trying to control rather than sitting in front of them..
• Included USB and AC power cables, extra IR cables, mounting adhesive, and rubber feet..
• Wireless Distance: 200m (650 ft.), distance may vary due to obstacles, IR Receiver Distance: 7m (30 ft.).

TNP IR Emitter - Dual Head Infrared Remote Cable Extender (10 Feet 3 Meters) - 3.5mm Infrared Jack IR Extender for Xbox IR Repeater Kit System, IR Range 38kHz to 56kHz

• Extend remote control ability to any room in the house, hidden Xbox One, AV receiver and compatible with devices in 38khz. PLEASE NOTE: Please confirm if this device suitable for your machine. Any problem please contact us first. We will resolve..
• The Infrared Emitter Extension Cable comes with adhesive backing sticks directly onto different devices.
• For use with infrared extender extension system, Xbox One, IR Connecting Blocks and Home Automation controllers.
• Overall length of Infrared Emitter Extender: 5 feet (1.5 meter),and 3.5mm port.
• Passes IR communication: Used with an IR Repeater kit to control a device.
• Extend remote control ability to any room in the house.

IR Infrared Emitter Extender Cable Extension Single HeadEye 3.5mm Jack Infrared Red Transmitter Blaster Eye Wire Cord Compatible with IR Repeater Extender System Kit, Xbox One (IR-1.5m)

• Extend remote control ability to any room in the house, hidden Xbox One, AV receiver and compatible with devices in 38khz. PLEASE NOTE: Please confirm if this device suitable for your machine. Any problem please contact us first. We will resolve..
• The Infrared Emitter Extension Cable comes with adhesive backing sticks directly onto different devices.
• For use with infrared extender extension system, Xbox One, IR Connecting Blocks and Home Automation controllers.
• Overall length of Infrared Emitter Extender: 5 feet (1.5 meter),and 3.5mm port.
• Passes IR communication: Used with an IR Repeater kit to control a device.
• Extend remote control ability to any room in the house.

OBVIS IR Infrared Repeater Kit Remote Control Kit Hidden IR System with 1 Receiver 4 Emitters Control Up to 4 Devices Compatible with DVD Player TV CD Player Amplifer Home Theatre Cable Box Xbox One

• Extend remote control ability to any room in the house, hidden Xbox One, AV receiver and compatible with devices in 38khz. PLEASE NOTE: Please confirm if this device suitable for your machine. Any problem please contact us first. We will resolve..
• The Infrared Emitter Extension Cable comes with adhesive backing sticks directly onto different devices.
• For use with infrared extender extension system, Xbox One, IR Connecting Blocks and Home Automation controllers.
• Overall length of Infrared Emitter Extender: 5 feet (1.5 meter),and 3.5mm port.
• Passes IR communication: Used with an IR Repeater kit to control a device.
• Extend remote control ability to any room in the house.

Sewell Direct BlastIR Wireless Pro Emitter Only Remote Control Extender (IR Emitter),SW-32988-TX

• Control any IR device from a distance. Blu-Ray Players, Cable and DVR Boxes, AV Receivers, Logitech Harmony Devices, Anything else that uses an IR signal!.
• 10-channel system that gives you the ability to interact with your devices without needing to worry about your Wireless Extenders interfering with one another.
• Included USB and AC power cables, extra IR cables, and mounting adhesive.
• Warning: Similar products do not support as many devices as the genuine BlastIR Wireless Pro. This kit is the only kit with the compatibility and accessory package that simply works out of the box.

USB Powered Infrared Repeater Hide Your Set top Box

RuiLing 1-Pack 3.5mm IR Infrared Emission Line Remote Control Receiver Extension Cord Cable 1m

• Package: 1 piece remote control extenders, light-weight, small-size and solid, commonly used when your receiver is hidden away in a cupboard, in a different room, or behind your TV..
• Connector: Come with a standard universal 3.5mm jack male plug at one end and an IR emitter at the other, 1m cable long enough to position the sensor in anywhere in your house..
• High Sensitivity: Real time transmission without any delay with its high sensitivity sensor. 38kHz frequency range, compatible with various of electronic products and appliances..
• Purpose: Used with an IR Repeater kit to control a device, allow you to extend remote control ability to a location that the remote control or IR repeater system block can't reach..
• Application: Allows you to control A/V component by the existing IR controller, such as set-top box, stereo receiver, car audio system, hard disk player, Satellite TV receiver, CD player, DVD player, Bluray player or other components..