Top Z Wave Dimmer No Neutral

EATON RF9640-NWS Z-Wave Plus Universal Dimmer, White Satin

  • Replaces standard switch to add local and wireless control.
  • Compatible with most common residential lighting loads including LED, CFL, INC, MLV, ELV, HAL.
  • Single pole and 3-Way control: Use with Z-Wave Plus Accessory dimmer RF9642-Z.
  • Features 7 step blue load indicating LED light that can be dimmed in ON or OFF state.
  • Supports Z-Wave Plus technology including S2 Security certification for advanced encryption & cyber-security.
  • Voice and app-based control when used with compatible Z-Wave controller.
Check Stock

Zooz 700 Series Z-Wave Plus S2 Dimmer Switch ZEN77, White | Simple Direct 3-Way and 4-Way Solution (Works with Regular Switches, No Aux Switch Needed) | Z-Wave Hub Required

  • SIMPLE 3-WAY & 4-WAY: Use it with existing on/off switches (NO dimmers) in your 3-way, 4-way, or 5-way set-up, even if load and line are not in the same box. No need for add-on switches, no need to rewire other boxes. Just wire the Zooz in the box with direct connection to power and neutral (check your boxes before buying)..
  • FASTER INSTALLATION: The new model is just 1.16" deep so it will fit a shallow or crowded box much easier! It takes half the time to install the S2 switches in 3-way and 4-way set-ups than for any other Z-Wave solution. Intuitive wiring diagrams are printed in the manual (look for more on the Zooz website) and if you need custom instructions, just ask!.
  • MORE FEATURES: Double tap to go from off to full brightness (single tap to last brightness level - now fully programmable if your hub supports advanced settings). NEW multi-color LED indicator with adjustable brightness level, night light mode, and many more features to customize the dimmer (if you have access to advanced features from your hub)..
  • LATEST SECURITY: Equipped with the new S2 authenticated security protocol and SmartStart for instant and safe pairing. Z-Wave Plus and ETL certified for communication and safety standards compliance. Lifetim....
Check Stock

JAS12724 - GE 12724 Z-Wave(R) in-Wall CFL-LED Dimmer Switch

  • ...place any standard in-wall switch with the GE Z-Wave controlled dimmer switch to turn lighting on/off or adjust dim levels with your mobile device or computer using any Z-Wave certified gateway..
  • Screw terminal installation provides improved space efficiency when replacing existing switches compared to flying leads. Neutral connection required for installation..
Check Stock

Enbrighten Z-Wave Plus Smart Light Dimmer with QuickFit and SimpleWire, 3-Way Ready, Compatible with Alexa, Google Assistant, ZWave Hub & Neutral Wire Required, Toggle, 46204

  • ... outdoor fixtures for whole-home automation and repeats your Z-Wave signal from your hub or other devices to extend your range by up to 150ft. Extended signal range increases your home automation coverage to enhance your control..
  • EASY INSTALLATION – Requires indoor in-wall installation with hardwired connections. NEUTRAL WIRE REQUIRED. Wallplate not included. Full-range dimmability for use with dimmable LEDs and CFLs as well as incandescent and halogen bulbs. Supported wattage – 600W incandescent.
  • 300W LED, CFL. Supported voltage – 120VAC. Operating temperature range 32-104 degrees Fahrenheit..
Check Stock

Inovelli ZWave Dimmer Switch Red Series | No Neutral Required | Energy Monitoring Repeater 3-Way Smart Switch Technology LED RGB Notifications Signal Indicator | Z-Wave Plus w/S2

  • ABOUT: In-wall smart dimmer switch that works w/ SmartThings, Wink, Vera / VeraPlus, Hubitat & more.
  • NEXT GEN FEATURES: Unlimited RGB LED notifications, scene controller, & remote energy monitoring.
  • NO NEUTRAL REQUIRED: Switch works without a neutral -- Please see listing pictures for limitations.
  • COMPATIBILITY: Must use a Z-Wave Compatible HUB (Ring, ISY, HomeSeer, etc) to work with Alexa / Echo.
  • CERTIFICATIONS: Z-Wave Plus (S2 Enabled w/SmartStart Technology), Underwriters Lab (UL), FCC, IC.
Check Stock

Enbrighten, White & Light Almond, GE Z-Wave Plus Smart Motion Light Dimmer, Works with Alexa, Google Assistant, SmartThings, Wink, Zwave Hub Required, Repeater/Range Extender, 3-Way Compatible, 26933

  • ... outdoor fixtures for whole-home automation and repeats your Z-Wave signal from your hub or other devices to extend your range by up to 150ft. Extended signal range increases your home automation coverage to enhance your control..
  • EASY INSTALLATION – Requires indoor in-wall installation with hardwired connections. NEUTRAL WIRE REQUIRED. Includes white and light almond cover buttons (wall plate not included). Full-range dim ability for use with dimmable LEDs and CFLs as well as incandescent and halogen bulbs. Supported wattage – 600W incandescent.
  • 150W LED/CFL. Supported voltage – 120VAC. Operating temperature range 32-104 degrees Fahrenheit..
Check Stock

Enbrighten Z-Wave Smart Rocker Light Dimmer with QuickFit and SimpleWire, 3-Way, Works with Alexa, Google Assistant, ZWave Hub Required, Repeater/Range Extender, White & Light Almond, 2-Pack, 47898

  • ... outdoor fixtures for whole-home automation and repeats your Z-Wave signal from your hub or other devices to extend your range by up to 150ft. Extended signal range increases your home automation coverage to enhance your control..
  • EASY INSTALLATION – Requires indoor in-wall installation with hardwired connections. NEUTRAL WIRE REQUIRED. Includes white and light almond paddles (wall plate not included). Full-range immobility for use with dimmable LEDs and CFLs as well as incandescent and halogen bulbs. Supported wattage – 600W incandescent.
  • 300W LED/CFL. Supported voltage – 120VAC. Operating temperature range 32-104 degrees Fahrenheit..
Check Stock

Enbrighten Z-Wave Plus Smart Light Dimmer with QuickFit and SimpleWire Works with Alexa Google Assistant SmartThings Wink Zwave Hub Required Repeater/Range Extender 3-Way Ready White 47338

  • VOICE CONTROL – ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). Works with the following Z-Wave certified hubs: SmartThings,....
  • ADVANCED DESIGN 2ND GENERATION MODEL – Improved components reduced the housing depth by up to 20% compared to previous Z-Wave models and eliminated....
  • VERSATILE APPLICATIONS – Control the device remotely with your smartphone and voice commands when connected to a compatible hub or enjoy manual....
  • FULL HOME COVERAGE – Z-Wave Plus works with all previous Z-Wave generations to allow continued expansion of your home-automation network. The dimmer....
  • EASY INSTALLATION – Requires indoor in-wall installation with hardwired connections. NEUTRAL WIRE REQUIRED. Wallplate not included. Full-range....
Check Stock

NEO Z-Wave Plus Smart Light Switch 1 Gang 2 Switchs in-Wall Smart Switch Touch Panel Touch Sensitive Home Automation Remote Control, Work with Z-Wave Hub

  • ...ith most Z-Wave Certified hubs. Support multi-device controlled, can be working interactively with other Z-Wave sensors via the gateway..
  • 【Important Notes Before Buying】 1) Please double check the size of the switch and mounting bracket. The device is 1 gang and support 2 switches. 2) Please make sure there is a neutral wire in your switch box, which is required for installation. 3) Be sure the wiring is correct. Electric knowledge is required, otherwise please hire professional electrician..
Check Stock

Minoston Z-Wave Outdoor Dimmer Plug, Outdoor Smart Outlet Switch, Z-Wave Hub Required, Weatherproof, Built-in Repeater, Work with SmartThings, Wink, Alexa, Black(MP22ZD)

  • This Z-Wave outdoor dimmer plug compatible with those Z-Wave hub: SmartThings, Vera, Wink, Fibaro, Homeseer, Ring, Honeywell, 2GIG, Hubitat(change device type). ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). CANNOT connect directly with ECHO PLUS！Z-Wave Frequency: 908.42MHz. FCC & ETL listed..
  • 0-100% Dimming and Voice Control: This Z-Wave outdoor dimmer for string lights can adjust the light brightness from 0-100% by voice commands. Just say:“Hey Alexa, set the led strip lights to 75%”..
  • Ideal for Outdoor: IP65 weatherproof housing. Ideal for Garden, Backyard, Kitchen, Bathroom, Porch, Balcony, Garage, Basement, Patio or Electric grill, Sprinkler, Washing machine, Christmas tree, landscape lighting, fountains, lamps, pumps, and other outdoor or indoor-use electric appliances..
  • Schedule and Timer: You can set automatic daily timers or create on/off routing so that the Z-Wave plug can turn on and off automatically. And saving energy when the plugged-in appliances are not needed or are left on by accident..
  • 400W Max Power Z-Wave Dimmer Plug: The Z-Wave plug-in smart dimmer plug works with dimmable string lights in LED, INC bulb. Please make sure your string lights are dimmable and the total power is less than 400W. 150W Max for....
Check Stock

Gocontrol ZWAVE PLUGIN DIMMER MOD

  • Use this simple smart plug-in dimmer to wirelessly control, schedule and adjust the brightness of any hard-wired, dimmable light in your home from anywhere using a Z-Wave certified gateway.
  • Plug into any standard electrical outlet and make your home smart. Does not impede 2nd outlet. No wiring needed.
  • Integrated night light function lights the way when the dimmer of off.
  • Energy monitoring reports energy usage (feature must be supported by Z-Wave hub).
  • Works with the WT00Z5-1 Wireless 3-Way switch..
Check Stock

ZRC-90US, BW8510US, by Remotec, Cert ID: ZC10-15100007

  • ...or other devices in your network for one-touch control of your favorite smart lighting presets. Use the buttons to enter "Away" mode on your way out or to turn off all of the lights before you go to bed with a single click..
  • DIRECT 3-WAY SOLUTION: No add-on switch needed! Works with regular 3-way switches as long as NEUTRAL is present. Wire it just like the ZEN21/ZEN71 models. Please follow the appropriate diagram in the manual and rewire both boxes exactly as shown. Works great as a single pole switch too!.
  • Z-WAVE HUB COMPATIBILITY: Most basic Z-Wave systems aren't advanced enough to allow scene control programming. The ZEN32 Scene Controller is supported by: SmartThings (with a custom handler, instructions included with the product), Hubitat, Home Assistant, and HomeSeer. Please do NOT buy this device if your hub isn't listed here, it will not be recognized correctly by your system..
  • NEW 700 SERIES: This product is built on the latest 700 series Z-Wave chip for better signal coverage than ever, faster communication, with S2 authenticated security and SmartStart for effortless pairing..
  • EASY INSTALLATION: Clear diagrams and 7-day a week support included. No side tabs and just 1.1" deep to fit shallow and crowded switch boxes. NEUTRAL WIRE REQUIRED (chec....
Check Stock