Top Z Wave Light Bulb

Aeotec Range Extender 6, Z-Wave Plus repeater

  • Z-Wave Plus wireless signal repeater and range extender. Compatible with Z-Wave and Z-Wave Plus..
  • Amplifies and repeats weak signals boosting the range and reliability of weak Z-Wave devices..
  • Plug in to 110 volt wall socket. Small design so it does not block other outlets.
  • Compatible with all Z-Wave gateways including Control4, Fibaro, SmartThings, and Vera..
  • Z-Wave Plus certified. Certification number: ZC10-16095239DescriptionYou use Z-Wave to manage your smart home. You use Range Extender 6 to keep Z-Wave reliable. Aeotec's Range Extender 6 works seamlessly to amplify and repeat weak Z-Wave and Z-Wave Plus signals. Simply plug it into a power socket, connect it to your Z-Wave network, and it automatically starts improving any poor Z-Wave signals that are in range. As it's custom desgined as a wireless signal booster, Range Extender 6 performs better than other Z-Wave devices that offer simply repeating.
  • it amplifies the signal too. Designed to use Z-Wave Plus, unlike previous editions Range Extender 6 can work with advanced Z-Wave features such as encryption and security devices such as door locks while remaining compatible with older versions of Z-Wave. It repeats signals 250% faster than other signal repeaters and can repeat Z-Wave signals up to 492....
Check Stock

NEO Z-Wave Plus Smart Light Switch 1 Gang 2 Switchs in-Wall Smart Switch Touch Panel Touch Sensitive Home Automation Remote Control, Work with Z-Wave Hub

  • 【SIMPLE OPERATION】 Each light switch has a unique ID code. When you add or remove the switch from the alarm host, just place light switch in the Z-wave network range of gateway. The LED Night Navigation can easily to spot the position of the lights in the night..
  • 【MAKING A COMPARISON】Compare with the traditional light switch. The device not only does it allow for manual control, but also remote. Meet the requirements of traditional switch wiring, no need to change the exiting wire.High Touch Sensitive, it can provide immediately response. You also can check the real-time status of lights from your mobile phone APP. Remind you to turn off lights and save energy..
  • 【AUTOMATE YOUR LIFE】 Automate your NEO smart switch with Z-Wave gateway and set it to turn lights on or off when you get home. The smart switch can control incandescent, resistive, fluorescent, and inductive lights. Only used indoor, NOT dimmer..
  • 【Z-WAVE TECHNOLOGY】 Z-Wave Plus Certified and integrates with most Z-Wave Certified hubs. Support multi-device controlled, can be working interactively with other Z-Wave sensors via the gateway..
  • 【Important Notes Before Buying】 1) Please double check the size of the switch and mounting bracket. The device is 1 gang and support 2 switc....
Check Stock

GoControl WA00Z-1 Z-Wave Scene-Controller Wall Switch (White)

  • Controls Z-wave Light Bulbs, Switches & Dimmers Wirelessly.
  • Fits Over An Existing Wall Switch. Works with different types and brands of Z-Wave LED Light control devices.
  • Manually Turns On, Off Or Dims Lights.Powered by 2 pieces of standard CR2032 Lithium Coin Cell with long battery life.
Check Stock

HomeSeer HS-FLS100 Z-Wave Plus Floodlight Sensor GEN 2

  • AUTOMATIC AND REMOTE CONTROL: Controls floodlights automtically when motion is sensed or remotely with Z-Wave commands..
  • MULTIPLE SENSORS: Built-in motion, temperature and light (LUX) level sensors report back to the hub..
  • EASY TO INSTALL: Works with standard floodlight fixtures and 120v incandescent & LED flood light bulbs..
  • COMPATIBILITY: Works with most Z-Wave hubs. Device handler avaialble for SmartThings new app users..
  • LATEST TECH: Includes Z-Wave Plus technology and S2 encryption for best performance and security..
Check Stock

Sensative Z-Wave Plus Indoor/Outdoor Flood Prevention and Water Sensor Strips Drip Works with SmartThings

  • Ultra-thin Z-Wave Plus sensor notifies you when water leaks or freezing temperatures are detected.
  • Included temperature and light sensors monitor ambient temperature and light.
  • Communicates with Z-Wave devices up to 131 feet (40 meters).
  • Compatible with most Z-Wave controllers, plus Ring, Raspberry Pi and more.
Check Stock

Aeotec WallMote Quad, Wireless Zwave on Off Switch, Z-Wave Plus Enabled, 4 Zwave Button, 16 Scene Wall Switch with Remote Control, Work with Z Wave Hub

  • It is great as the zwave light switch that you can place anywhere. But WallMote is also the zwave remote that you can use anywhere..
  • Group Z-Wave and other connected devices together via your z-wave hub and activate them via WallMote Quad..
  • Work with other z wave devices. Control many. And all with a single tap Each of zwave smart button can be programmed to control one Z-Wave device or many.
  • Compatible with z-wave gateway: Smartthings, Zipabox, Hubitat, Indigo 7, Homey, etc.. Zwave certification NO. ZC10-17015380.
Check Stock

Zooz Momentary Push-Button in-Wall Switch ZAC99

  • VERSATILE APPLICATION: Push-button control for garbage disposals. Can be used with Z-Wave dimmer modules for local dimming control (NOTE: THIS IS NOT A Z-WAVE DEVICE)..
  • MOMENTARY CONTROL: Press and hold to trigger the motor in your garbage disposal, release to stop. Tap to turn on the light, press and hold to adjust brightness, tap again to turn off the light when using with a Z-Wave dimmer module..
  • FLEXIBLE INSTALLATION: Accepts 14 AWG and 12 AWG wires. Works with loads up to 15 A..
  • EASY FIT: Slim design for extra room in the switch box..
Check Stock

Aeotec TriSensor, Z-Wave Plus S2 Enabled Zwave Motion Sensor, Temperature, Light Sensor, Work with Zwave Hub Smartthings 3-in 1 Security System, Battery Powered

  • 3-in 1 Motion, Temperature, Light sensor. Motion sensor accurate to 23 feet, TriSensor also detects temperature -10~50°C / 14~122°C with accracy of ±1°C, 0~30000 LUX with ±3% accracy..
  • Wireless and Cordless. Powered by 1 x CR123A battery, estimated battery life: 1 Year. Battery not packed with the box..
  • Adjustable calibration. Craft your own smart home with 3 levels of detecting calibration..
  • Compatible with certified Z-Wave gateways including: Samsung SmartThings, Vera, Zipabox, Open Z-Wave, Homeseer HS3, Domoticz, Isy994i ZW universal controller and more..
  • Z-Wave Plus and Z-Wave S2 certified for quicker response time, better wireless range up to 490 feet in open space, and additional wireless security encryption. Z-Wave Plus certification number: ZC10-18056128..
Check Stock

EATON RF9640-NWS Z-Wave Plus Universal Dimmer, White Satin

  • Replaces standard switch to add local and wireless control.
  • Compatible with most common residential lighting loads including LED, CFL, INC, MLV, ELV, HAL.
  • Single pole and 3-Way control: Use with Z-Wave Plus Accessory dimmer RF9642-Z.
  • Features 7 step blue load indicating LED light that can be dimmed in ON or OFF state.
  • Supports Z-Wave Plus technology including S2 Security certification for advanced encryption & cyber-security.
  • Voice and app-based control when used with compatible Z-Wave controller.
Check Stock

ZRC-90US, BW8510US, by Remotec, Cert ID: ZC10-15100007

  • MAIN BUTTON: Connect a 120 V light fixture (up to 150 W for LED's) to control it via Z-Wave or use the main button for wireless control only with up to 7 button triggers available. Z-Wave hub required, sold separately. NOTE: your smart speaker is NOT a Z-Wave hub..
  • 4 REMOTE BUTTONS: Program each button to activate scenes or other devices in your network for one-touch control of your favorite smart lighting presets. Use the buttons to enter "Away" mode on your way out or to turn off all of the lights before you go to bed with a single click..
  • DIRECT 3-WAY SOLUTION: No add-on switch needed! Works with regular 3-way switches as long as NEUTRAL is present. Wire it just like the ZEN21/ZEN71 models. Please follow the appropriate diagram in the manual and rewire both boxes exactly as shown. Works great as a single pole switch too!.
  • Z-WAVE HUB COMPATIBILITY: Most basic Z-Wave systems aren't advanced enough to allow scene control programming. The ZEN32 Scene Controller is supported by: SmartThings (with a custom handler, instructions included with the product), Hubitat, Home Assistant, and HomeSeer. Please do NOT buy this device if your hub isn't listed here, it will not be recognized correctly by your system..
  • NEW 700 SERIES: This product is built on the latest ....
Check Stock

Zooz Z-Wave Plus Q Sensor ZSE11 | Motion, Temperature, Humidity, Light (Hub Required)

  • 4 SMART SENSORS: Get motion alerts and monitor temperature, humidity, and light to take your smart home to the next level. Use this device as the trigger to lighting automations, security alerts, or climate control. It's as versatile and as quick to report as can be. Compatible Z-Wave hub required (sold separately)..
  • FLEXIBLE MOUNT: Use the included mounting bracket to adjust the sensor's field of view and ensure precise monitoring. Power the sensor with batteries (included) or a micro USB cable (sold separately). Always use a single power source only. Works as a Z-Wave repeater when included on USB power..
  • Z-WAVE COMPATIBILITY: Most basic Z-Wave systems aren't advanced enough to display multisensors correctly. The ZSE11 Q Sensor is supported by: SmartThings (with a custom handler, instructions included with the product), Hubitat, Home Assistant, Indigo, Vera, and HomeSeer. Please do NOT buy this device if your hub isn't listed here, it will not be recognized by your system..
  • MINIMAL DESIGN: Simple and modern look to compliment any interior. This sensor is small enough for discreet monitoring of your home, office, or warehouse space..
  • MORE SECURITY: Includes S2 Authenticated Z-Wave security and SmartStart for the safest communication possible. Back by a ....
Check Stock

Minoston Z-Wave Switch On/Off Toggle Wall Light Switch Works with SmartThings, Wink, Support 3-Way Installation, Signal Repeater, Required Z-Wave Hub, White(MS12Z)

  • Voice Control: This Z-Wave smart toggle on/off switch is compatible with Alexa Echo and Google Home. REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products. CANNOT connect directly with ECHO PLUS..
  • Z-Wave certified gateway: The MS12Z is compatible with Samsung Smartthings, the Wink Hub, and all certified Z-Wave controllers..
  • Work with: This Z-Wave enabled universal switch works for most residential lighting control. It supports LED, CFL,incandescent and halogen bulbs. Supported voltage - 120 VAC..
  • Wireless control: Turn lights on/off, schedule, or group the light from multiple switches all with a smartphone app, automatically turn lights on when you are home, and off when you are away..
  • Installation Requires: hard-wired connections. Neutral wire required for single-pole and 3-way installation Ca This Z-Wave switch works w/existing (dumb) switch for a 3-way wiring scenario..
Check Stock