Top 5 Flute Cutter

Steel Tap Extractor Set M4 M5 M6 M7 M8 M9 Broken Head Taps Remover Stripped Screw Tap with Box 6 Piece

  • ❤ LONG SERVICE TIME---The tap extractor 3/4 flute is made of superior high speed steel, which is of high hardness and anti-corrosion, could be used for quite a long period.
  • ❤ 3/4 FLUTE SPECIFICATION---1#: 3 flute, M4, 6#.
  • ❤ SUITABLE FOR---The tap extractor 3/4 flute works for removing stripped, rusted, broken, or corroded screws and bolts, Suitable for industrial screw and bolt removal and for everyday home repair work.
  • ❤ SPECIFICALLY ENGINEERED---With each tap extractor specifically engineered, the tap extractor 3/4 flute could grab speedily, and could grab broken screw taps out easily.
  • ❤ QUALITY GUARANTEEING---Every tap extractor gets through rigorous quality testing, and unqualified one will be removed, durable to use. Please feel free when using.
Check Stock

FTG USA Replacement Wood Countersink Drill Bit Set 3 Piece Same Size #6 9/64 Parabolic Flute Taper Point for Woodworking with Straight Shank - Tapered HSS M2 Drill Bit Only

  • ... wider flute space, dispersing chips away from the cutting edges more rapidly and increasing coolant flow. The parabolic spiral allows chips to flow up quickly leaving less damage to be corrected after drilling. Package contains 3 Piece Same Size 9/64" (#6 screw) Replacement Tapered Drill Bit Only Without Four-cutter Countersink, made to replace the 9/64” bit of #6 Countersink FTG 6810PRB.
  • FTG Parabolic Flute allows chips to flow up quickly leaving less damage to be corrected after drilling. Improved chip evacuation leads to a better surface finish in the hole. The parabolic drill tip can slip-on wood surfaces.
  • it is recommended to hold it rigidly and drill slowly until the tip grabs the material.
  • Higher Quality cutters FTG Parabolic Flute drill bits are manufactured from premium High Speed Steel M2 Grade 6542. Parabolic flutes are constructed with a wider flute shape for increased chip flow.
  • THIRD-PARTY TESTED High Speed Steel M2 countersink drill bit for wood with tapered drill bits. FTG Parabolic Flute drill bits are premium products, they are higher quality cutters. Due to their unique design, with improved chip extraction, FTG Parabolic Flute drill bits drill holes faster than other drill models.
  • Company Based in Bloomfield, NJ, USA. This pro....
Check Stock

Be91eiter Damaged Screw Extractor Set, 22 PCS Stripped Kit for Broken Bolt All-Purpose HSS Remover Set with Magnetic Extension Bit Holder & Socket Adapter, Silver

  • ❤ LONG SERVICE TIME---The tap extractor 3/4 flute is made of superior high speed steel, which is of high hardness and anti-corrosion, could be used for quite a long period.
  • ❤ 3/4 FLUTE SPECIFICATION---1#: 3 flute, M4, 6#.
  • ❤ SUITABLE FOR---The tap extractor 3/4 flute works for removing stripped, rusted, broken, or corroded screws and bolts, Suitable for industrial screw and bolt removal and for everyday home repair work.
  • ❤ SPECIFICALLY ENGINEERED---With each tap extractor specifically engineered, the tap extractor 3/4 flute could grab speedily, and could grab broken screw taps out easily.
  • ❤ QUALITY GUARANTEEING---Every tap extractor gets through rigorous quality testing, and unqualified one will be removed, durable to use. Please feel free when using.
Check Stock

MH GLOBAL Corner Rounding End Mill Set Shank Milling Cutter 8 PC HSS 4 Flute 1/16-3/8''

  • Wooden Box Dimension: 3-3/8 in L x 5-7/8 in W x 4 in H *Rough Estimation*.
  • Corner Rounding End Mill Set Shank Milling Cutter 8 PC HSS 4 Flute 1/16-3/8''.
  • Can Be Re-Sharpened Repeatedly Without Changing Form.
Check Stock

Rochix Flute Cleaner Care Cleaning Kit,Maintenance Kit,Khaki,Key Oil,Cork Grease,Swab,Cleaning Cloth,Cleaning Brush,Cleaning Rod

  • What will you receive, package included 1 flute cleaning kit (1 flute cleaning rod with 3 pcs flute cleaning cloth).Satisfy your need for cleaning musical instruments..
  • Durable Material, the flute cleaning rod is made of plastic and has a smooth surface that will not damage the inside of the flute. Cleaning cloth is made of high-quality fabrics, soft and durable. Make you flute maintain a good tone.rial, the flute cleaning rod is made of plastic and has a smooth surface that will not damage the inside of the flute. Cleaning cloth is made of high-quality fabrics, soft and durable. Make you flute maintain a good tone..
  • Suitable size, Flute Cleaning Rod approx. 34.5 cm/13.6 inch, Flute Cleaning cloth approx. 15*14.7 cm/5.9*5.8 inch. It used to clean and dry the inside of the flute. Suitable for various flutes and piccolo..
  • Easy to use, put the cleaning cloth through the flute cleaning rod, or attach this cleaning cloth to the flute inner. Then insert the rod into the flute and rotate to clean the flute..
  • Widely use, Suitable for most flutes and piccolo, it can use to clean the interior and adjust the position of the flute reflector. This flute cleaning kit will keep your flute in a good tone for a long time..
Check Stock

DEWALT Masonry Drill Bit Set, Percussion, 4-Piece (DW5204)

  • 2 cutter carbide tip of masonry drill bit set maximizes carbide surface contact for longer bit life..
  • Four flute design cleans debris out for fast, efficient drilling.
  • Three flats on shank eliminate bit slipping in chuck (except DW5232, DW5233, DW5237, DW5238).
  • Rock carbide tip maximizes carbide surface contact for longer bit life.
  • Three flats on shank eliminate bit slipping in chuck.
  • Innovative tip reduces walking and increases accuracy.
  • Used primarily to drill holes for mechanical anchors, fits standard 3/8-inch and 1/2-inch chucks.
Check Stock

DEWALT Masonry Drill Bit Set, Percussion, Concrete & Block, 7-Piece (DW5207)

  • 2 cutter carbide tip of masonry drill bit set maximizes carbide surface contact for longer bit life..
  • Four flute design cleans debris out for fast, efficient drilling.
  • Three flats on shank eliminate bit slipping in chuck (except DW5232, DW5233, DW5237, DW5238).
  • Rock carbide tip maximizes carbide surface contact for longer bit life.
  • Four-flute design cleans debris out for fast, efficient drilling.
  • Three flats on shank eliminate bit slipping in chuck.
  • For use with electric or cordless hammerdrills.
  • Ideal for drilling holes in brick, block, concrete, and masonry.
Check Stock

Flute Cleaning Rod with 3pcs Cleaning Swabs Flute Cleaning Kit Flute Cleaner Flute Polishing Cloth, Black

  • Made of plastic and has a smooth surface without damaging the inside of the flute..
  • The flute cleaning stick is about 13.6 inches / 34.5 cm long, and the flute cleaning cloth is 5.79 inches x 5.9 inches / 14.7 cm x 15 cm..
  • Easy to use, the cleaning cloth on the flute stick hole, and then insert it into the flute for cleaning, can keep the flute well..
  • Suitable for most flutes and piccolos, for cleaning the interior and adjusting the position of flute reflector..
  • Package includes: 2 flute cleaning sticks and 2 flute cleaning cloths..
Check Stock

HSS 12mm x 45 Degree Dovetail Cutter Milling End Mill High Speed Steel

  • Durable and Sturdy: This Dovetail Milling Cutter is made of high speed steel, so it is wear-resistant, durable, tough, and you can use it for a long time..
  • Uniform Angle Distribution: This Dovetail Milling Cutter featuring uniform angle distribution and double-edged design has more excellent cutting performance..
  • Wide Application:This milling cutter with fine workmanship and high quality is suitable for mold steel, alloy steel, carbon steel, tool steel, cast iron and more..
  • Meet Your Needs: Available in 45 and 60 degree, 8 and 10 flute, and 12mm,14mm,16mm,18mm, 20mm, and 25mm diameter, this Dovetail Milling Cutter can meet your needs..
  • Satisfaction Guarantee: We strive to bring the product to our customers. If you are not satisfied, please let us know, and we'll do our to make it right.
Check Stock

Fafeicy Carbide Chamfer End Mill, 3 Flute 60° Milling Cutter V Groove Router Bit Tungsten Steel CNC Carving Polishing Router Bit, for Plywood, Soft Wood(D4*60°*50L), Milling Cutter

  • The chamfering mill is mainly used for the 60 ° chamfer or conical hole of the workpiece, and the edges and angles of each surface are champened..
  • This hard alloy chamfered milling cutter unique single-piece design makes debris generated during the cutting process without clogging the tool..
  • The chamfering cutter is of standard size and can be used as aluminum-copper milling tool and engraving milling cutter bit..
  • This hard alloy chamfering cutter uses 3 flute design to complete the processing of tapered surfaces at a time, suitable for small cutting processing..
  • This chamfering cutter has a wide range of applications, suitable for hardwood, plywood, cork, oak, MDF and metal in HRC 55..
Check Stock

Dovetail Groove Milling Cutter, Compact Stable 40Mm High Hardness 6 Flute Milling Cutter, for Industry Factory

  • Compact and practical design make it works more stable..
  • The installation of the milling cutter is very convenient and easy..
  • The body is integrally formed, the surface is smooth and burr-free, and the manufacturing dimensions are accurate..
  • Made of carbide cemented, high hardness and good wear resistance..
  • The effective cutting flute of the milling cutter is 6..
Check Stock

Instrument Clinic Flute Cleaning Rod with 5 Pack of Disposable Cleaning Swabs

  • Made of plastic, the surface is smooth and will not damage the inside of the flute..
  • The flute cleaning rod is approximately 13.6"/ 34.5cm long, and the flute cleaning cloth is 5.79" x 5.9" / 14.7cm x 15cm..
  • As an important part of the instrument care and maintenance system, this cleaning accessory will keep your flute in a good tone..
  • Just go through the cleaning cloth and pull out the flute. Used to clean and dry the interior. Suitable for all kinds of flutes and piccolo..
  • Package included: 1 piece flute cleaning rod + 3pcs cleaning cloth..
Check Stock