Top Bilge Pump Installation
AMRM-4505-7 Attwood Sahara Automatic Bilge Pump - 500 GPH
- The Attwood Sahara Bilge Pump is a durable, compact, and easy to install automatic bilge pump. The Sahara has everything contained in one compact yet durable package, making this pump a great option for tight spaces. This series of bilge pump features a 316 stainless steel motor shaft for corrosion resistance and a durable high-impact, glass-filled polyester impeller. The base of the pump has quick, one-handed removal for easy disassembly for cleaning..
- Pumps include 36" lengths of 16-gauge caulked and tinned copper wire. An automatic-switch bilge pump is a requirement for any vessels 20’ especially those that accommodate overnight passengers and crew. All Attwood bilge pumps come with a 3 year manufacturer's warranty..
- Mercury-free switch. Test knob for easy operational check Non-restrictive float movement. Larger filter area resists clogging.
- Free flow of water around housing keeps motor cool. 316 Stainless Steel motor shaft for saltwater corrosion resistance. Durable high-impact, glass-filled polyester impeller.
- Sahara S500 Part #: AMRA-4505-7, GPH at Open Flow: 500, GPH at 3.3' Head: 350, Hose Size: 3/4" I.D..
Check StockHand Bilge Pump Manual Hand Water Pump for Kayaks Canoes and Boats Emergency Hand-Operated Marine Bilge Pump with Reversible Hose
- ⛵HAND BILGE PUMP FOR BOATS: Our manual bilge pump length is 17", and the maximum unfolded length is 28.3", which is easy to store and takes up minimal space. It’s the perfect boating accessory for kayaks, canoes, dinghys and small boats. Our bilge pump remove water quickly and downward strokes for maximum efficiency and less fatigue.
- ⛵MAKES WATER REMOVAL EASIER & FASTER: Our hand water pump features a 34.6" long hose with a 1.16" intake nozzle and 1.37" diameter hose that makes reaching the bottom of your boat easier and removing excess water faster. This hand suction pump works great to remove water from the bottom of a motorboat, canoe or dinghy.
- ⛵EASY TO USE: Just simply connect the hose to the end of the pump, insert the bottom of the pump into the water, and use the handle to start pumping. It sucks water when you push the handle in, and disperses the water when you pull the handle out!.
- ⛵NO CLOG FILTER & ANTI-LEAK DESIGN GASKET: Our marine bilge pump Features a filtered nozzle to prevent seaweed, leaves and debris from clogging this hand water pump. And The premium rubber sea....
Check Stockattwood Sahara MK2 800 GPH 12-Volt Automatic Bilge Pump
- 800 GPH, 12V, Fuse size: 4A, Outlet type: 3/4" & 1" barbs, Check valve: yes, Wire length: 29 1/2".
- The easiest, most reliable automatic bilge pump ever designed.
- The only automatic bilge pump that eliminates air-locks, Patented X-Air Impeller ejects trapped air in the pump and pipework.
- Flexible Outlets: 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation.
- Single-Hand Pump Cartridge Release: Convenient when trying to access a pump located in a hard-to-reach area of the boat’s hull.
- Universal Backwards Compatible Design: 7-pump mounting hole pattern for replacing any top bilge pump in its category.
- SteadySwitch: Buoyancy control reduces cycling, draining the bilge not the battery.
- No Pipe Or Hose Removal Required: Reduces the time that it takes to replace the cartridge.
- Improved Motor Cooling/Heat Dissipation: Prevents overheating that may cause failures, such as blown fuse, leaking, etc..
- Includes straight outlet and check valve.
Check StockLINGVUM Bilge Pump for Kayak Canoe and Boat - 17 Inch Manual Portable Kayak Hand Water Pumps with Reversible Hose Orange
- CONVENIENT BILGE MANUAL WATER PUMP --- Our manual bilge pump length is 16.5", the maximum unfolded length is 25.5", equipped with a 23.2"long hose. At the same time, Our bilge pump has two water inlets and a long hose that attaches to either end, removing water quickly and reducing your fatigue.
- MAKES WATER REMOVAL EASIER --- The maximum displacement is 0.4L each time. The premium rubber seal creates a watertight seal that won't come loose or leak allowing for the maximum amount of suction and discharge that performs better than other hand bilge pumps. Suction spacers can allow water to flow into the manual water pump at the fastest speed.
- SCENE TO BE USED --- Perfect for emergency water removal in boats, kayaks, canoes or dinghies. With our kayak bilge pump, rest easy knowing that you’ll have a quick and easy way of removing water in those difficult times. Spending time on the water is supposed to be fun! Perfect boating and kayaking accessory.
- LIGHTWEIGHT & PORTABLE --- This kayak hand pump is light (Only 0.78 pounds), easy to carry and store. Foam padded handgrip is non-slip and provides buoyanc....
Check StockWhale BP3000 Gusher 30 Manual Bilge Pump, On-Deck, up to 31 GPM Flow Rate, 1 ½-Inch Hose Connections, for Boats Over 40 Feet
- Proven manual bilge pump with a robust design to stand up to the most demanding marine environments and conditions.
- Designed for bilge or holding tank pump-out on a boat 40 feet long or longer.
- Rugged, corrosion-resistant Marine Grade LM6 alloy construction with a powder coat finish.
- High-capacity double acting pump that pumps on both the to and fro strokes.
Check StockSeaChoice 19301 Submersible 2000 GPH Bilge Pump
- 【Specification】:Outlet Diameter : 29mm/ 0.95 Inch (1-1/8") POWER:1100 GPH Current(A):3.2A Volt:12V.
- 【Automatic mode connection】:Connect black wire to negative,Connect brown wire to positive,the pump will be shut off automatically when the water is pumped out.This auto bilge pump 1100 gph would improve work efficiency and could be used for a long term..
- 【Advantages】:Equipped with built in electronic controlled sensor system for easy fully automatic operation.It is a small automatic boat bilge pump and it is rustproof and corrosion resistant..
- 【Warning】:This auto boat bilge pump is designed for use with fresh water and salt water only. And polarity is important. If it is not correct, the pump rotate backwards..
- 【Applications】:Ideal For Fishing Boats, Cruisers, Runabouts, Yachts, skiff, etc..
Check StockBBH Marine Boat Plastic Thru Hull Fitting Drain Fits 1\ Inch Hose
- This fitting should be used above the waterline..
- Our Thru-Hulls are meant for installation through the transom and are good for overflow use in livewell installations or as an exhaust port for a bilge pump..
- Their construction is designed to resist degradation as a result of chemical and saltwater exposure..
- Thru hull bilge fitting for Marine/Boat/Yacht..
Check StockFive Oceans Bilge Pump Three-Way Rocker Control Panel Switch with Circuit Breaker, Black, Automatic-Manual-OFF functions, LED light indicator, FO-3851
- With this Three Way Bilge Pump Switch, you do not have to change a fuse. In case of having a short circuit, just press the button of the circuit breaker to restore the circuit.
- PROVIDE remote control of automatic bilge pumps or bilge pumps with float switches.
- 3-WAY Stylish Rocker Switch has Auto, OFF and Manual positions. Power indicator light confirms system power.
- MANUAL position has spring back feature to prevent bilge pump from continuously running.
- COMPATIBLE with bilge pumps that draw up to 10A - 12/24VDC. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.
Check StockShoreline Marine Fully Submersible Bilge Pump 600GPH with ¾’ Outlet Hose Barb
- Fully submersible 600 Gallons per hour bilge pump with a self-contained automatic switch to maintain a safe water level.
- Features a durable plastic housing that can withstand the harshest marine environment.
- Comes with a universal mounting base for effortless installation and cleaning.
- With a tough stainless-steel impeller shaft and tinned marine grade wiring for a steady and reliable performance.
- The outlet hose barb measures ¾’ that can fit a common ¾ bilge hose and thru-hull fittings.
Check Stockattwood Sahara MK2 500 GPH 12-Volt Automatic Bilge Pump
- 500 GPH, 12V, Fuse size: 3A, Outlet type: 3/4" & 1" barbs, Check valve: yes, Wire length: 29 1/2".
- The easiest, most reliable automatic bilge pump ever designed.
- The only automatic bilge pump that eliminates air-locks, Patented X-Air Impeller ejects trapped air in the pump and pipework.
- Flexible Outlets: 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation.
- Single-Hand Pump Cartridge Release: Convenient when trying to access a pump located in a hard-to-reach area of the boat’s hull.
Check StockNewport Kayak Hand Bilge Pump, Blue
- DUAL ACTION: Our Kayak Hand Bilge Pump is dual action, meaning whether you're pushing or pulling, it's still pumping water out of your boat..
- FLOATING: If you drop it overboard, this pump will float back up to the surface for you..
- EJECTION TUBE: Our pump includes an ejection tube, so the water you pump doesn't end up back in your boat..
- WHY: Quickly pump water out of the floor of your kayak, canoe, jon boat, inflatable dinghy, sailing dinghy, or other small watercraft. Use the ejection hose to clear the hull so the water isn't ending up back in your boat..
- INCLUDED IN BOX: Kayak Bilge Pump w/ Foam Float, Water ejection tube.
Check StockGOTOTOP Manual Bilge Pump 720GPH Plastic Handle Marine Manual Bilge Pump Hand Tools Water Transfer Diaphragm Hand Bilge Water Pump for Marine Boat Yacht
- Flow Capacity: Delivers up to 12 gallons per minute (45 litres per minute) flow capacity. Lightweight and sturdy, its easy lever action allows fast pumping.
- Convenient to Use: Strong and durable construction, specifically designed for marine applications. Easy to use and maintain, the diaphragm is quickly accessed for removing debris.
- Suitable for: Ideal as a backup bilge pump in case your electronic bilge pump fails. Manual bilge pump for small to medium-sized boats.
- Rubber Handle Grip: Fixed handle with rubber handle grip, easy and convenient to use. Compact design for all your water transfer needs..
- Diaphragm Self Priming: This product is a 100% brand new compact manual self-priming pump..
Check Stock