Top Clutch Spring Tool

Dorman 14505 Clutch Alignment Tool Compatible with Select Models

  • OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
  • Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
  • Rugged construction will easily support the weight of heavy clutch discs.
  • To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
  • 2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 3.6 inches long.
Check Stock

QISF 2Pcs Magneto Flywheel Puller 24mm & 27mm and 20mm & 24mm Clutch Lock Nut Spanner Tool for Motorcycle ATV Dirt Bike Scooter Repair Tool

  • 【Function】-- Clutch plate hub nut spanner tool designed to loosen and tighten the lock nut for the removal and installation of a motorcycle clutch.Another Used for removal of the flywheel or rotor if applicable..
  • 【Fits】 Flywheel Puller for GY6 50CC 125CC 150CC Yamaha Honda Suzuki KTM ATV scooter dirt bike.
  • Clutch lock tool for 50cc-125cc Honda Motorcycle ATV Dirt Bike Go Kart Pit Bike 4 Wheeler.
  • 【Flywheel puller Size & Material】-- Stator magneto flywheel puller with 2 sizes:24mm&27mm.
  • 【Clutch lock Size】-- Clutch lock tool Inner Diameter(upper): 20mm.
  • 【Package includes】-- 1×Magneto Flywheel Puller, 1×Clutch lock tool.
Check Stock

Flying Horse 2-Stroke Motorized Bicycle Clutch Lever – Gas Bike Clutch Handle Replacement

  • DIRECT REPLACEMENT: The Flying Horse Motorized Bicycle Clutch Handle is used on most standard two stroke motorized bicycle engine kits and is used to engage and disengage your engine..
  • SPRING LOADED LOCK: This clutch lever features a spring loaded button that will lock your clutch lever in the disengaged position. That way when you choose to ride your bike with out the engine you no longer have to hold the clutch lever pulled in.
  • EASY INSTALLATION: Installation is a breeze: install the beaded end of your clutch cable in to the lever arm. Mount the lever to your handlebars and adjust your clutch cable tension as needed- now you're ready to ride.
  • UNIVERSAL FIT: Designed to work with most standard 48cc, 60cc, 66cc and 80cc 2 stroke motorized bike engines..
  • PACKAGE INCLUDES: 1x Flying Horse 2-Stroke Bicycle Clutch Clever. Color & Appearance May Vary.
Check Stock

RZR Clutch Cover Removal Tool kemimoto RZR Removal Tool kit with Reversible Socket Compatible with Polaris RZR XP 1000/ XP Turbo RS1 Ranger XP 1000

  • 【Fitment】-Clutch removal tool only Compatible with 2016 2017 2018 2019 2020 Polaris RZR/RZR-4 XP Turbo & RS1, 2018 Polaris Ranger XP 1000 & 2019....
  • 【 Flexible shaft】-RZR removal tool with flexible shaft and no-slip grip,which can be used within 90 degree bending range. The clutch cover removal....
  • 【Reversible】-kemimoto RZR clutch cover removal tool with a reversible socket that fits 8 mm clutch cover screw heads and 1/4" hose clamp. The....
  • 【Comfortable to use】-This clutch removal tool handle is designed according to ergonomic principles. Ensure the comfort of your hands during the....
  • 【Durable】-Removal tool of RZR is made of aluminum alloy, which is lighter and will not rust compared to other tools made of steel, and can be used....
Check Stock

Everything you need to know about Bicycle Chains: A book of special insights for expert mechanics

  • DIRECT REPLACEMENT: The Flying Horse Motorized Bicycle Clutch Handle is used on most standard two stroke motorized bicycle engine kits and is used to engage and disengage your engine..
  • SPRING LOADED LOCK: This clutch lever features a spring loaded button that will lock your clutch lever in the disengaged position. That way when you choose to ride your bike with out the engine you no longer have to hold the clutch lever pulled in.
  • EASY INSTALLATION: Installation is a breeze: install the beaded end of your clutch cable in to the lever arm. Mount the lever to your handlebars and adjust your clutch cable tension as needed- now you’re ready to ride.
  • UNIVERSAL FIT: Designed to work with most standard 48cc, 60cc, 66cc and 80cc 2 stroke motorized bike engines..
  • PACKAGE INCLUDES: 1x Flying Horse 2-Stroke Bicycle Clutch Clever. Color & Appearance May Vary.
Check Stock

2016-2022 POLARIS RZR 1000 XP - NEW PRIMARY & SECONDARY DRIVE CLUTCH Complete Puller tool drive driven clutches 1000xp & S

  • NEW REPLACEMENT 2016-2022 RZR 1000 XP & S PRIMARY AND SECONDARY CLUTCHES + Primary clutch puller tool.
  • BOTH COME COMPLETE PRE TUNED - HELIX & SPRING IN SECONDARY AND WEIGHTS AND SPRING ALREADY IN PRIMARY!.
  • Has round rollers in Secondary instead of the problematic square pucks!.
  • ONE YEAR WARRANTY COVERED BY HARVEY'S ATV PARTS !.
Check Stock

2-in-1 Lock Nut Wrench Clutch Lock Nut Tool 20mm/24mm clutch lock nut spanner socket for Crf 600rr 450r 250l

  • STURDY SOLID MATERIAL -- The clutch lock nut spanner is made of solid steel material, sturdy construction, durable in using.
  • DESIGNED FOR LOCK SPANNER KIT -- A special and perfect replace grom clutch removal tool for : Replace special tool: # 07716-0020100,....
  • IMPORTANT DATA FOR YOU TO CHECK -- Large End Inner Diameter: 24mm / 0.94 inch.
  • Large End Outer Diameter: 30mm / 1.18 inch.
  • COMES WITH 4 PIN LOCK NUT SPANNER -- 4-pin socket clutch nut tool, each end has 4 pegs.
  • One side is 20mm inner diameter and another side is 24mm inner....
  • FITMENT -- This clutch nut tool can be used for 14mm clutch lock nut on: crf50, xr200 1980-1984, xr200r 1984-1994, xr250l 1991-1994, xr250r 1986-1994,....
Check Stock

ClutchXperts SPC Clutch Alignment Tool KIT Compatible With 2006-2015 Mazda MX-5 Miata 2.0L 6-Speed

  • OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
  • Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
  • Rugged construction will easily support the weight of heavy clutch discs.
  • To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
  • 2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 7.3 inches long.
Check Stock

ABN Air Compressor Clutch Rebuild Removal Tool Kit AC Clutch Puller for Car Auto Air Conditioning on GM, Ford, Chrysler

  • REPLACe A/C CLUTCH ASSEMBLY: Use the ABN Air Compressor Clutch Rebuild Removal Tool Kit – AC Clutch Puller for Car Auto Air Conditioning to remove, install, or rebuild clutches found on FS6, C171, 6P, and 148 compressors.
  • GM R4 and A6, HR-6, DA-6 and V A/C compressors.
  • sander compressors SD 505, 507, 575, 708, and 709.
  • Wide application of vehicles including GM, Ford, Chrysler, imports, and other makes and models.
  • Check vehicle owner’s manual for a list of compatible compressors.
  • EASY TO USE: Keep all threads clean and well-oiled.
  • Outer part of tool has smooth side and threaded side (threads used to attach to inner clutch shaft when removing).
  • Start with one bearing between tool and clutch, and thread down fully onto compressor's inner shaft threads (This is the fixed part - inner bolt does not move when threading down outer piece).
  • Remove tool and stack other bearing on to take up the distance the clutch pushed into pulley.
  • BUILT TO LAST: Constructed from stainless steel with a black coated finish for ultimate strength and longevity.
  • Resists rust and corrosion with proper care and lubrication.
  • 2 and 3 hold puller plate allows mechanical force to do all of the pulling on most clutches.
  • EASY STORAGE: Heavy-duty 10.5” x 8.25” x 2.25” inch (2....
Check Stock

BILITOOLS Fan Clutch Removal Tool Kit, Fan Clutch Wrench Set 22 36 40 47 51 MM with Pulley Holder

  • Fan clutch service tool set includes 5x Fan clutch wrenches - 22mm, 36mm, 40mm, 47mm, 51mm.
  • Special fan clutch wrench tool kit is designed to remove and install fan clutches when repairing or replacing the water pump, timing chain or the fan clutch..
  • The pulley holder with 4 pairs of replacement pins is designed to trap and hold bolt on pulleys by the mouting bolts. It is suitable for most vehicles and newer Chrysler engines with press on pulleys requiring sprcial pins to hold housing..
  • This fan clutch tool Kit is made from forged steel for superior strength, black finish further improves corrosion resistance for lasting durability..
  • The fan clutch wrenches are compatible with Ford Trucks (2.8L, 2.9L, 3.0L, 4.0L, 1.9L engines), Dodge Trucks (3.9L, 5.2L, 5.9L, 8.0L, V10 engines), GM Trucks (4.3L, 5.0L, 5.7L engines), ect..
Check Stock

YHB 32mm & 36mm Fan Clutch Nut Wrench and Water Pump Holder Tool Kit Removal for BMW Fan Clutch Tool Removal kit (3pcs) - Fan Clutch Removal Tool 36mm and 32mm Fan Clutch Tool Kit

  • 【Item name】 Fan Clutch Nut Wrench, Clutch Removal Tool Kit, Fan Clutch Wrench Set, Water Pump Holder Removal Tool Kit, designed to easily remove the lock nuts on a temperature dependent thermo-viscous fan..
  • 【Compatible with】Fan Clutch Nut Wrench Compatible with BMW E34 E46 E90 E39 E36.
  • 【Applications】32mm Clutch Removal Tool Kit Made to be compatible with BMW engine models M4 M10 M20 M30 M40 M44 M50 M52 M52TU M54 M56 M60 M70 M73 S14 S38 S54 S50B30 S50B32.
  • 【Features】FEXON Fan Clutch Wrench Set makes it easy to hold water pump pulleys in place while you loosen and service your radiator fan. The tools have been heat treated to improve product performance..
  • 【Easy to Use】Quickly removes and installs fan clutch when repairing the water pump or fan clutch..
Check Stock

Van SanShao years Replace Echo Clutch Removal Tool CS-400 CS-500 CS-510 for Echo Chainsaws 89750516133

  • Clutch Removal Tool for Echo Chainsaws / Echo Part # 89750516133.
  • Replaces: Echo Part #s 89750516132, 89750516131, 89750516130, 89750502830, 89750503930, 89771002830.
  • Fits Echo Chainsaw Models: CS-4600 S/N, CS-5000 Type 1E, CS-510 S/N, CS-5500 S/N, CS-520 S/N, CS-4000, CS-4500, CS-4600 S/N, CS-5500 S/N.
  • The metal tool is used to remove the clutch from the crankshaft. This item fits over the clutch and a wrench or ratchet is used to put leverage on the....
  • Package Qty: 1 Clutch Removal Tool for Chainsaws.
Check Stock