Top Cnc Tool

Fstop Labs Replacement for DJI Phantom 3 Gimbal Yaw Arm + Gimbal Cable Kit in CNC Aluminum for Professional/Advanced / 4K

  • Compatible with Phantom 3 Professional, Advanced, 4K.
  • Includes gimbal ribbon cable, yaw arm, set screw, hex wrench.
  • Anodized Silver to match original partsDescriptionIntroducing our Aluminum direct replacement gimbal parts for the DJI Phantom 3 Professional, Advanced, and Standard. These are CNC-machined out of a solid block of 6061 aircraft-grade aluminum. Guaranteed OEM fitment and function..
  • CNC-machined from solid 6061 aircraft-grade aluminum Guaranteed.
  • Painted silver to match original DJI parts.
  • Yaw Arm + Roll Arm + Roll Arm Cover + Alignment Tool.
  • Tweezers (helps to manipulate ribbon cables and screws).
Check Stock

uxcell Spotting Drill Bits 5mm Dia 5mm Shank 60 Degree Solid Carbide AlTiSin Coated 2 Flutes Round Shank Drilling Cutter

  • Spotting Drill Bits: Cutting Edge Diameter: 5mm / 0.2".
  • Total Length : 50mm / 2.0". Large spiral flutes provide neat and smooth cuts. Spiral groove facilitates the export of metal chip..
  • Wide Applications: Widely used for drilling steel below HRC60, such as stainless steel, carbon steel, die steel, alloy steel. The AlTiSin composite coating has high hardness, high wear resistance and high thermal stability..
  • Carbide Tool: Made of fine-grained tungsten carbide, the drill bit has good toughness, high hardness (HRC92), wear resistance and heat resistance. With good cutting strength and drilling effect, carbide tool offers long tool life and faster cutting speeds than other substrates..
  • Easy to Use: Universal chamfered round shank, easier clamping, stable cutting process. Suitable for CNC machining centers, CNC machine tools, precision engraving machines and other equipment. The longer the length of the tool clamped by the chuck, the better..
  • Tips: If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life. Select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance..
Check Stock

End Mill Bit Sets, 12pcs Tungsten Carbide CNC Rotary Bits PCB Milling Bits CNC Router Bits Engraving Bits Cone Cutter Drilling Hole Tool for PCB Mould, Plastic, Fiber, Carbon, Wood 0.25mm~5.5mm

  • Material: Made of quality Tungsten Solid Carbide, These CNC router bits have high flexural strength and wear resistance, sharp and durable, with good milling, cutting performance..
  • Superior precision: Flutes design provide good chip-carrying capacity, enhancing the tool’s ability to remove material. And with sharp cutting edge, improve working efficiency greatly, no glitches or scrap left.
  • Set of 12 size: 0.25mm, 0.3mm, 0.4mm, 0.5mm, 1.3mm, 1.4mm, 1.7mm, 1.9mm, 2.5mm, 3.55mm, 4mm, 5.5mm. It can meet your needs greatly..
  • Widely application: These CNC router bits fit for PCB board, SMT, CNC, Mold, engraving, plastic fiber, carbon fiber, cooper, stainless steel, printed circuit board, other precision environmentally friendly sheet, CNC machine tool,etc..
  • Service guarantee: We promise provide you good customer service, if there is any dissatisfaction, you can just contact us, we will refund you or send you new replacement within 24 hours..
Check Stock

Johnson Level & Tool 400EM-S Heavy Duty Professional Inch/Metric Metal Combination Square 12 Silver 1 Square

  • COMBO SQUARE: The square head of this Johnson metal square ruler is CNC machined for enhanced precision. Its Auto-Lock blade assembly makes it easy to....
  • STAINLESS BLADE: This combination square tool has a stainless steel blade with English and metric graduations of 1/8", 1/16", and 1/32", as well as....
  • CAST ZINC HEAD: The durable acrylic vial, heavy-duty cast zinc head with a chip-resistant e-coating finish, and reinforced screw-in scriber that won't....
  • APPLICATIONS: The CNC-machined head of the measuring tool acts as a stop, ensuring layout lines are always square to the edges. This makes it an ideal....
  • PRODUCT SPECIFICATIONS: This 12’’ combination square measures ‎0.75 × 5.5 × 12 inches and weighs 4.8 ounces (0.18 kg). This Johnson Level tool....
Check Stock

Dango T01 Tactical EDC Wallet - Made in USA - Genuine Leather, Multitool, RFID Block

  • Designed to hold up to 12 cards (business or credit cards).
  • Genuine top grain leather that is secured to the Dango Wallet chassis with mil-spec bolts..
  • RFID blocking keeps your information secure.
  • Made from 6061 aerospace grade CNC'd aluminum, weighs just over 2 ounces.
  • Comes with Dango Multi-Tool: CNC-machined high carbon stainless steel with over 10 functions, including a saw, knife, paracord tensioner, 10/15mm hex, smartphone stand, nail pryer, ruler, etc. The multi-tool is easily removable from the wallet and can be either checked or left at home when traveling..
Check Stock

Maxmartt 5pcs ISO30 Tool Holder Clamp Cradle Claw Set CNC Machines Automatic Tool Changer

  • tool holder 100% brand new and high quality..
  • cnc tool holder Designed for any type of ISO30 tool holder and automatic tool change system..
  • iso30 tool holder clip Professional manufacturing, perfect match with the tool holder..
  • iso30 tool holder clamp Made of high quality PVC material, wear resistant, heat resistant..
  • clamp tool holder Stable performance, anti-aging, acid and alkali resistant..
Check Stock

Mosin Nagant Buttstock Pouch Coyote Brown

  • Magazine Disassembly Tool: The easiest and fastest way to remove base plates from the standard Glock magazines without any damage to the plates and....
  • Front Sight Installation Hex Tool: Magnetized hex tool to aid in the installation and removal of front sights on Glock pistols.
  • Armorers Disassembly Tool: Aid in the removal of pins and base plates on Glock pistols.
  • Precision cnc machined；2 Years Warranty: 100% Satisfaction Guarantee.
Check Stock

ER11 CNC Collet 3Pcs 1/8 inch 3.175mm 4mm 6mm Spring Collet Workholding Engraving Collet Milling Lathe Tool

  • ☑【Description】-These spring collets are made of high quality 65Mn spring steel for CNC milling lathe tool and work-holding engraving machine..
  • ☑【High Quality】-This Spring Collet Fine workmanship, good elasticity, high precision and run-out tolerance is less than 0.008mm..
  • ☑【Convience】-Each collet is marked clearly so you can easily distinguish them..
  • ☑【Best Choice】-Great collet for CNC milling lathe tool and work-holding engraving machine..
  • ☑【Note】-Collet must be placed into collet chuck nut before inserting into collet chuck..
Check Stock

Moore Ideal Products 9512 Metric Speed Tip Set

  • Fits any 1/4" Inch chuck handle or drill in order to speed up wrench time!.
  • Tool Hex cut with diamond wheel for ultimate precision.
  • Tool Shank CNC ground from us Grade tool steel drill Blanks.
  • Tight tolerances held within 20 microns which is .02 mm and Moreover .0008 in. ! to put that into perspective that's like taking a human hair and dividing it by 4 !.
Check Stock

2 Pieces CNC Router Z-Axis Tool Setting Touch Plate CNC Touch Plate Probe Block Router Probe Milling Tool for Milling DIY Engraving Machine Probe

  • Package includes: you will receive 2 pieces of CNC router Z-Axis tool touch probes, which are equipped with high precision, smooths surface, and....
  • Size parameters: the size of this setting touch plate probe measures approx. 40 x 10 mm, and the length of cable measures approx. 1.2 cm, which can....
  • Reliable material: this CNC router Z-Axis tool is made of quality alloy material, strong and durable, and the bottom is insulated, waterproof and....
  • Easy to use: this Z-Axis router tool setting touch probe has the characteristics of high accuracy, smooth surface and exquisite design, and it is easy....
  • Wide range of application: this setting touch plate probe is suitable for processing most materials, such as woodworking, aluminum, acrylic, plastic,....
Check Stock

Simple Woodturning Tools COMBO: Mid Size Rougher, Turner & Hollower and Detailer Carbide Wood Turning Hand Tool Set with Interchangeable Handle for Wood Lathe (3 Tools w/Brilliant Red handle) USA Made

  • Benefits of Carbide Lathe Tools: Simple to use for all skill levels making woodturning fast and more enjoyable. You can focus on your project and not on techniques or sharpening. No long learning curve or expensive sharpening equipment. You can begin turning as soon as your box arrives because each tool comes with a very sharp, rotatable carbide cutter. Just rotate the cutter head ¼ turn for a clean, sharp edge and you are back to turning wood..
  • Handle Details: The most beautiful, solid aluminum lathe tool handle on the market, 100% USA made by American craftsman. CNC machined from solid aircraft aluminum for balance & durability. Beautifully powdercoated to a brilliant finish to last for years. Overall length is 12".
  • tool opening is 3/8" diameter. Tools can be easily changed by loosening the two stainless steel set screws.
  • Mid Size Tool Details: Premium quality, American-made, CNC machined from 3/8” square stainless steel, making them stronger, stiffer and less likely to roll than round shaft tools. These mid size carbide tools feature an overall length of 9", with a handle tang of 3/8" diameter x 2" length..
  • Tool Use: The mid size Simple Turner & Hollower is ideal for turning small bowls, handles, bottle stoppers, etc. T....
Check Stock

MYSWEETY CNC 3018Pro-M Engraver Machine Kit, GRBL Control 3 Axis Mini DIY CNC Router Kit, Plastic Acrylic PCB PVC Wood Milling Engraving Machine, with Offline Controller and ER11 and 5mm Extension Rod

  • ⚒️【2-IN-1 CNC 3018 Pro-M】- CNC 3018pro-M DIY Mini CNC Machine features two 5mm acrylic baffles on each side of the machine so that you can safely monitor the engraving process. A great tool for entrance CNC. Able to curved text on daily materials easily. Great for those who are interested in CNC, helping you engrave the model efficiently..
  • ⚒️【Offline Controller】- The offline controller is 1G Capacity.You can control the CNC router without connecting to the computer. The CNC router can be placed wherever you want, such as garage and workshop..
  • ⚒️【New Control Board】- Integrated Driver Chip + Fixed Heat Sink + External Fan + Sturdy Casing to extend the life of the control board, Self-contained short circuit protection, Not easy to damage. 12 Months Warranty..
  • ⚒️【Versatile】- It can work on wood, bamboo, paper, leather, plastic, PCB, acrylic, metal surface paint, metal surface plating etc. It can not work on hard metal, iron, glass, 201/304 stainless steel, jewelry or silver, and other hard things.It is recommended to engrave 0.1-0.3mm each time..
  • ⚒️【Simple Assembly】- Assembly instructions are provided, but if you get stuck, contact us with any questions that arise. Thank you!.
Check Stock