Top Double Flute Straight Router Bits

Yakamoz 10-Pack 1/8" Shank Upcut Spiral Router Bits 3-Flute 7/8" Cutting Length CNC Router Flat End Mill Bits for MDF Acrylic Wood PVC 7/8" Cutting Length

  • Type: Spiral (Upcut), Cutting Type: 3 Flutes with Flat End, Shank: 1/8" (3.175mm), Cutting Diameter: 1/8" (3.175mm), Cutting Length: 7/8" (22mm), Overall Length: 1-33/64" (38.5mm).
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits..
  • The unique flute design makes cutting process easier and faster, smooth cutting without 2nd polishing process..
  • Great for carving, cutting, engraving, milling in materials like density board, plastic, PCB, PVC, PP, MDF, nylon, resin, plywood, hardwood etc..
  • Built with tungsten steel, the CNC router mill has the superiority of high hardness, high-temperature resistance, and wear resistance..
Check Stock

WEN RB500-3 Heat-Treated Multi-Profile Carbide-Tipped Router Bit Set 3-Piece

  • Professional-grade heat-treated HSS design includes carbide tips for a long-lasting sharp edge.
  • Includes one 1/4 in. Straight 1-Flute Carbide-Tipped Router Bit with 1/4 in. Shank (Model RB003SF), 1/2 in. Flush Trim Carbide-Tipped Router Bit with....
  • Straight one-flute profile makes for perfect grooves and dadoes in your workpiece.
  • Flush trim profile helps replicate complex edges and create flush surfaces.
  • Roundover profile creates rounded edges to your workpiece.
Check Stock

Stalwart - RBS024 Router Bit Set- 24 Piece Kit with ¼” Shank and Wood Storage Case By (Woodworking Tools for Home Improvement and DIY) Wood

  • ...ent projects. The case also helps protect the bits while traveling to work on the go or remote site locations.
  • SET INCLUDES- 1/2 mortising bit, 1/2 combination bevel bit, 3/8 dovetail bit, 1/2 dovetail bit, 1/2 90 degree V-groove bit, 3/8 round nose bit, 1/2 round nose bit, 3/8 trimming bit, 1/4 panel pilot bit, 1/4 straight bit, 3/8 straight bit, 1/2 straight bit, 3/4 straight bit, 1/2 flush trim bit, 1/8 radius round over bit, 3/16 radius round over bit, 1/4 radius round over bit, 3/8 radius round over bit, 1/4 cove bit, 3/8 cove bit, 1/2 45 degree chamfer bit, 1/4 Roman Ogee bit, 1/4 slot cutter bit, 1/2 rabeting bit, wood case.
  • Router bit bits set tongue and groove wood doors flooring shaker door routers panel shank joint 1 2 storage kit holder for cabinet sets inch case box plywood tool tools accessories DIY home improvement.
Check Stock

SpeTool 1/4 Shank Carbide End Mill for Aluminum Cut (3 Flutes, 3.5 inch Long) Non-Ferrous Metal Upcut CNC Spiral Router Bit

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/2 inch Cutting Length, 3-1/2 inch for Total Length.
  • The Route Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining..
  • For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Carbide EndMill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

SpeTool Extra Long End Mill for Aluminum 5/16in CNC Router Bits Metal Cutter 3-Flute Tools, 1-5/8in Flute Length, 4in Overall Length

  • Solid Carbide Spiral Router Bit with 5/16 inch Shank and 5/16 inch Cutting Diameter, 1-5/8 inch Cutting Length, 4 inch for Total Length.
  • The Route Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining..
  • For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Endmill Suit for CNC Router and Brand Plunge Router with 5/16" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

Yonico Router Bit Set Professional Carbide Tipped 70 Bit 1/2-Inch Shank 17702 - Large Assortment, Straight, Edge Forming, Dovetail, Grooving, Flush Trim Fresas de Router para Madera

  • Professional 1/2 Shank router bit set with carbide cutters includes a large assortment of router bits including straight bits, slotting bits, edging bits, joinery bits, roundover bits, keyhole bits....
  • A large selection of essential router bits in a full range of sizes for every project. Includes premium bearings for smooth operation and fence setup and adjustment..
  • Premium thick C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge with optimal hook and shear angles. Proper relief angles which prevent burning..
  • For use on table mount and handheld router. Suitable for professional users and beginners and for all project types. Comes in a handsome wooden display case to keep your bits organized and sharp..
  • Silver induction brazing for maximum strength and durability. Finely balanced and tuned with a build-up and heat resistant coating with anti-kickback design..
Check Stock

SpeTool 3 Flute Carbide End Mill for Aluminum Non-Ferrous Cutting Tool Upcut Bit for CNC Machine, 1/2 Inch Shank, Extra Long 4 Inch

  • Solid Carbide Spiral Router Bit with 1/2 inch Shank and 1/2 inch Cutting Diameter, 2 inch Cutting Length, 4 inch for Total Length.
  • The Route Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining..
  • For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Carbide EndMill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/2" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

WORKPRO 15-Piece Router Bits Set, 1/4-Inch Shank Tungsten Carbide Router Bits for Woodworking, Solid Woods, Hard Woods, Chipboard, MDF, DIY, and Carpenter

  • 【VERSATILE ROUTER TOOL SET】The set includes 1/4 inch router bits set, that is dovetail bit, mortising bit, panel pilot bit, cove bit, 4* straight bit (1/8'', 1/2'', 1/4'', 5/8''), roman ogee, 2* cove box bit (R1/4'', R1/8''), 45-degree chamfer, flush trim, confer round, 90-degree "V" grooving bit and storage case.
  • 【SHARP&DURABLE】Carbide router tips head, precisely machined, sharp, and heat-resistant, last 80-90 percent longer than HSS bits. With two cutting edges, the router bits set surpass single-edge bits in making smooth cuts. The inclined angle facilitates the removal of wood chips.
  • 【SAFE FOR USE】These bits with plenty of metal behind each cutting edge.
  • Anti-kickback design prevents kickback caused by fast feeding and deep bites. What's more, the 1/4 inch shank bits provide greater stability and less vibration during operation.
  • 【EASY TO STORE&CARRY】Storage case with identification for easy access and organization. The case also helps protect the router bits while on the travel or during working time.
  • 【WIDELY APPLICATION】Effective for edging, trimming, veining, and grooving all types of wood.
  • perfect for door panels, picture frames, plywood, and other carpeting projects. Suitable for the hobbyist and for light work.
Check Stock

THINKWORK Compact Router, 6.5-Amp 1.25 HP Compact Wood Palm Router Tool Kit, Wood Trimmer with 15 pieces 1/4

  • ...g conditions. The transparent base is designed to recognize accuracy easily in processing..
  • Rich AccessoriesInclude several accessories, such as wrenches, chucks, template guide adapter, sub-base plate, and more. The Trimming guide, roller running along the curve, ensuring cutting is exact, curve processing is fine. Straight guide, thicker models are stable and not deformed, straight processing is stable. You can tighten the router bits with the wrenches..
  • Wide ApplicationThis wood compact router is widely used in wood processing, cabinet processing, handicraft production, wood veneer, and other similar materials chamfering, grooving, surface finishing, curve cutting, planing wood edge, pattern processing operations activities, DIY..
  • What You Will Get15 pieces 1/4" shank router bits set(Bonus Gift!), 1x 110V compact router, 10 x sandpapers, 1 x 1/4" to 1/2 " router collet, 1 x straight guide, 1 x guide plate, 1 x trimming guide, 2 x wrenches, 6 x carbon brush, 1 x bolt, 1x screw, 1 x manual, and our easy-reach customer service..
Check Stock

EANOSIC Upcut Spiral Router Bit 3-Flute with 1/2” Shank, Extra Long (4 inch), 1/2” Cutting Diameter, 2” Cutting Length, Carbide CNC Router Bits End Mill for Wood Mortises Carving Engraving

  • Up cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 2 inch cutting length, 4 inch for total length.
  • PREMIUM QUALITY: The spiral upcut router bits Made of solid carbide (Tungsten steel), it is high-wearable and has a long life. You can decrease the times of changing cutters, save production time..
  • The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy..
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits..
  • The router bit suit for CNC router and any plunge routers with 1/2" collet..
Check Stock

Hymnorq 1/2 Inch Shank Dovetail Router Bit Set of 5PCS to Fit Most Jigs and Make Strong and Beautiful Dovetail Joints for The Construction of Boxes Drawers Chests and Fine Casework in Woodworking

  • QUALITY - Solid hardened steel bodies with anti-kickback design and C3 micro-grain tungsten carbide 2-flute cutters with heat resistant anti-stick....
  • MULTI APPLICATIONS - Make creative, decorative glue joints for drawers and jewelry boxes, shaker furniture and shadow boxes, sliding dovetail joints....
  • Smaller degree bits can be used for stair tread stringer mortising or shelf supports. Larger diameter bits can produce unique finger pulls..
  • FIT MOST JIGS - Wether you are using Akeda, Leigh, Incra, Porter Cable, or Keller Jig, this set of dovetail router bits will surely fit your jig and....
  • 5PC SET - The set includes 5 pieces of 1/2” shank dovetail router bits. Cutter diameters are 1/4", 1/2", 3/8", 5/8" and 3/4". Suitable for wood,....
Check Stock

SKIL SRT1039 Benchtop Portable Router Table

  • ABOVE THE TABLE ROUTER LIFT: Gain convenient access to router bits with the Above Table Adjustment provided by the SKIL SRT1039 all-inclusive Router Table.
  • INTEGRATED BIT STORAGE: Protect and store router bits with a double door, quick latch integrated bit case. This integrated bit storage saves you time and provides a central location for easy to lose bits.
  • PRECISION ROUTING: Router tool features a flat laying aluminum miter gauge slot, aluminum mounting plate, router clamp, and two featherboards for durable, accurate routing.
  • LARGE ALUMINUM FENCE: The tall 16-inch aluminum fence measures 24 inches wide and can handle tall stock with ease, while the fence is complete with adjustable MDF face plates and a starter pin and guard for smooth operation with taller work pieces.
  • TWO FEATHERBOARDS: Two easy to use, adjustable router edge guides attach to the fence and router table to provide additional guidance and protection against kickback.
  • ROUTER CLAMP: Allows you to easily access tools attached underneath the table.
Check Stock