Top Slotting Router Bits

SpeTool 1/4' Shank 1' Cutting Diameter Spoilboard Surfacing Router Bit Insert Carbide Slab Flattening Router Bit 2-Wing Planing Bit Wood Bottom Cleaning Planer Bit

  • This professional bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoilboard, but also for trimming and slotting/grooving. Great replacement bit tool for woodworking.
  • Carbide Inserts 10*10*2.2mm,the inserts will be available on asin "B09CPDVBSG".
  • Contains two cutting flutes and two up-shear scorers, which provide a smoother finish at the bottom of the cut than traditional two-knife style router bits.
  • MDF, LDF, fiberboard, plastic, plywood, hardwood, softwood, etc.
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock

CNC Spoilboard Surfacing Router Bits, 1/4 inch Shank 1 inch Cutting Diameter, Slab Flattening Router Bit Planing Bit Wood Planing Bit Dado Planer Bit by BINSTAK (Carbide)

  • 3 WINGS WOOD CNC ROUTER BIT: Shank: 1/4”.
  • HIGH QUALITY CNC SURFACING ROUTER BIT: The sharp carbide tipped bit, solid hardened steel bodies with anti-kickback design. Build up with heat resistant Teflon coating which can reduce resin build-up for fast and easy cleaning. This CNC router bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications, BINSTAK router bit can withstand some heavy duty use and the test of time..
  • VERSATILE ROUTING TOOl: This professional bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoilboard, but also for trimming and slotting/grooving. Great replacement bit tool for woodworking carpenter!.
  • USE RANGE for CNC ROUTING BITS: Suitable for solid woods, MDF, laminate, particle board, plywood compact panel, acrylic and etc. Avoid cutting metal and non-wood materials..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine..
Check Stock

Adoles Aluminum Door Hinge Jig,Woodworking Door Hinge Template,Slotting Locator,Suitable For Door Lock Jig And Router Jig,Helps You Install Quickly

  • 【SlLOTTING RANGE】 Maximum clamping 2.4 inches door panel slotting, maximum opening 7.1 inches, hole puncher comes with a scale length and width positioning support four-way flexible adjustment, powerful door hinge installation kit.
  • 【ALUMINUM ALLOY MATERIAL】 High-quality aluminum alloy one-piece molding, strong and durable, can be used as a woodworking door hinge template kit for router long-term use.
  • 【CONVENIENT AND QUICK ADJUSTMENT】With butterfly screws for quick adjustment of slotting size, the clamping part is designed with rubber anti-slip to ensure that the surface of the wooden door is not damaged. It is the choice of professional woodworkers..
  • 【MULTIPLE USE FUNCTION】 Can be used as door hinge template hinge slotting and can also be used for lock body guide slots and other slotting applications and designs, newcomers need to adapt to the tool to gain experience after more convenience and fast..
  • 【HINT】Router jig needs to be used with a trimming machine. After the slotting is completed, you need to pay attention to the milling knife touching the hinge jig, w....
Check Stock

Router Bits 1/4 Shank, Router Bit Set 15 Pcs, Roundover Router Bit 1/4 Shank - Carbide Router Bits for Wood, Woodworking, DIY

  • ✎[Router Bit Set] - 100% brand new and good quality router bits 1/4 shank boasts alloy blade, balanced craftsmanship and a solid hardened steel board with anti kickback design ensures safe installation. Rigid router bits carbide are all have a hardened solid alloy steel construction with Build-up & heat resistant Teflon coating, Carbide Edge for durability and longevity. These wood router bits set can withstand some heavy duty use and the test of time.
  • ✎[Perfectly Matched Router Bits] - 1/4 shank router bits set precisely match the requirement of the American dimension and standard. Each router bit has a 1/4-inch universal shank which fits all models of routers, carbide router bits 1/4 shank is compatible with all major router instrument (either handheld or benchtop router table) such as MNA, Kowood, Bosch, DeWalt, Makita, Tooldo, Milwaukee, Porter & Cable, Skil, Ryobi, Black & Decker.
  • ✎[Great Value 15 Piece Router Bits Set] - Precisely machined sharp YG8 tungsten carbide blade makes clean and accurate cuts on all types of wood, Cutters (C3 Micro-grain Tungsten Carbide) to slice smoothly into stock, clean, splinter free, prominent advantages in practical use. Select bits featuring a bearing roller for smooth and aligned operations. Well-construct....
Check Stock

BAYTORY CNC Spoilboard Surfacing Router Bits 1/4 inch Shank 1 inch Cutting Diameter Carbide Tipped Woodworking Planer Bottom Cleaning Tool Wood Milling Cutter Slab Flattening Surface Planing Bit

  • 3 Wings Wood CNC Surfacing Router Bits: Precise 3 Wings can cut your slab flattening project material quickly and cleanly. 1/4 Inch Shank, 1/4" Cutting height, 1" Cutting Diameter..
  • High-Quality CNC Router Bit: The sharp carbide tipped bit, made of microcrystalline carbide blades and strong hardened steel, have excellent wear resistance and sharp edges with anti-kickback design. High-precision grinding technology provides excellent abrasion resistance and sharp edges, and precise cutting will reduce chipping and burrs..
  • Great Design: This professional bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoil board, but also for trimming and slotting/grooving..
  • Wide Range of Applications: Suitable for cutting solid wood, particleboard, plywood, MDF and different wood composites. (Avoid cutting black metal and non-wood materials such as steel, iron and sand).
  • Applicable Equipment: Plus a turning Electrical and mechanical wood carving milling chuck connector from 1/2" to 1/4". Suitable for CNC and other automatic routers as well as hand-held and table-mounted portable routers. Wood engraving machines, trimming machines, etc..
Check Stock

10Pcs Nano Blue Coat End Mill CNC Router Bits,End Mill Rotary Burrs Engraving Machine Drilling Hole Tool for PCB Mould Plastic Fiber Carbon Fiber Hard Woo,1.5-3.175mm, 1/8\ Shank

  • ★Cutting Edge Diameter: 1.5-3.175mm (1.5/1.6/1.7/1.8/2.0/2.2/2.4/2.5/3.0/3.175mm),10Pcs 1 set meet different needs.
  • ★High Efficiency: Carbide end mill engraving bits features of the good milling and cutting performance, Excellent cutting results to ensure high work efficiency.
  • ★Wide Application: Suitable for PCB, CNC, carbon fiber, hard wood, Mold, plastic fiber, printed circuit board, and other precision parts processing - carving, cutting, engraving, milling, boring, routing, slotting. processing to drill hole and polish smooth surface.
  • ★Hard Steel Material: This 10 PCS 1.5-3.175mm carbide cnc router bits set is made of good grain carbide material, ultra hardness & wear resistance, sufficient strength, not easy to break to ensure longer using.
  • ★Perfect Cutting: All the cnc bits have sharp cutting edge, milling, hole and plate edge with the surface clean, neat and no glitches.
  • Fast chip-removal speed leaves an unobstructed path for the end mill.
Check Stock

Router Bit Storage Tray - Foam Material for Safe Router Bit Storage, 1-5/16 inch Thick and Stores 60 1/4 inch and 50 1/2 inch Shank Router Bits

  • We have all experienced the same issue. We start collecting router bits and little by little we realize that we have nowhere to put them. To even further complicate things, our router bits are both 1/4″ and 1/2″ shanks!.
  • We could always make our own storage out of a piece of wood, but the problem with that is the wood, wears and starts to slip after a while..
  • The 1-5/16″ thick foam router bit tray is a perfect storage solution for all those heavily used router bits that are currently in your drawers, on your shelves or in the router itself..
  • The foam router bit tray fits up to 50 each 1/2″ and 60 each 1/4″ shank bits giving you the ability to store up to 110 router bits in one convenient spot. The holes in the tray wrap neatly and snuggly around the bits to keep them from moving around and keep them out of harms way..
  • Wether you have 100 router bits or just a few, the foam router bit tray is and economical and effective way to keep your bits safely stored away when not in use. ROUTER BITS NOT INCLUDED.
Check Stock

Flytuo 6PCS 90 Degree V Groove and Round Nose Router Bit Set 1/4 Shank, Carbide 3D CNC Signmaking Lettering Engraving Router Bit, Woodworking Carving Cutting Tools

  • Durable Material&Construction: These V Groove Router Bits and Round Nose Bits, are made of high-quality tungsten steel alloy and high-tech special grinding process, whose blade has high strength and hardness, sharp and wear-resistant.
  • Precision&Neat Cuts Every Time: Including 3Pcs 90 Degree V-Groove Router Bits + 3Pcs Round Edge Groove Router Bits, smooth and no burrs, 6 pieces in total makes clean and accurate cuts on wood.
  • Versatile Woodworking Tool Kit: Complete your hardwood tool collection with 3Pcs 90 Degree V-Groove Router Bits and 3Pcs Round Nose Groove Router Bits.
  • Package Included: 3Pcs 90 Degree V-Groove Router Bits - 1/4" Shank, Cutting Diameter: 1/4", 3/8", 1/2".
  • 3Pcs Round Nose Groove Router Bits - 1/4" Shank.
  • Widely Applications: These tongue and groove router bit set is truly versatile for your extra convenience. Works great with woods, MDF, particle board, plywood compact panel. DO NOT cutting ferrous metal and non wood materials, such as: steel, iron, sand, etc.
Check Stock

HQMaster CNC Router Bits 1/8" Shank CNC Bit End Mill Flat Nose Carbide Endmill Two Flute Spiral Upcut Milling Cutter Tool Set for Wood PVC MDF Hardwood 10Pcs (3.175 mm)

  • RANGE OF PROCESSING: For carving/cutting/engraving/milling/slotting/sculpturing in materials like MDF, ABS, PVC, acrylic, nylon, resin, plastics, density board, wood, plywood, hardwood etc. Ideal for three-dimensional sculpture, surface machining, 3D relief sculpturing, etc.
  • DIMENSIONS: Shank Dia=1/8" (3.175mm). Cutting edge diameter=1/8" (3.175mm). Cutting edge length/flute length=17mm. Overall length=38.5mm.
  • HIGH EFFICIENCY: These bits own sharp edge which is able for fast engraving that makes high efficiency, durable, high precision and not easy to break. It is smokeless and burr-free while processing.
  • PERFECT CUTTING: The design of flutes, larger spiral chip space of CNC Router Bit makes non-stick crumbs, smooth cutting and fast chip-removal.
  • PACKAGE CONTENTS: 10pcs solid carbide spiral upcut bits assorted in storage case.
Check Stock

42950 1/2- inch Router Collet Fit for PORTER CABLE models, Delta, B&D

  • ⭐Features: | For use with 1/2" shank router bits | 1/2" Router collet for use as a replacement or adapter.
  • ⭐Auto-release design prevents "frozen" bits | Accepts 1/2" shank router bits | Auto-release design prevents router bits from sticking in the router.
  • ⭐Designed to minimize bit run-out and enhanced robustness | Helps decrease the amount of lost bits.
  • ⭐Specifications: | Material: Steel | Color: Black | Diameter(in): 0.5" | Outside Diameter(in): 0.5".
  • ⭐Collet Nut size: 1/2" | Length(in): 1.5" | Threads: 20tpi.
Check Stock

HQMaster CNC Router Bits 1/8 Router Bit Straight Router Bit 1 8 Shank Straight Flute End Mill Cutter 2-Flute Milling Cutting Tungsten Steel 22mm CEL/45mm OAL for MDF PVC Acrylic Chipboard Wood 10 Pack

  • Wide range of processing ---- for cutting/engraving/carving/grooving/slotting/drilling/hollowing/positioning/roughing /milling in materials like MDF, PVC, Acrylic, wood, solid wood, chipboard, composite board, organic board, core board, density board etc..
  • Dimensions ---- shank diameter (SD): 1/8" (3.175mm).
  • cutting edge diameter (CED): 1/8" (3.175mm).
  • cutting edge length (CEL)/flute length: 22mm.
  • High efficiency ---- these bits own sharp edge which is able for fast engraving that makes high efficiency.
  • durable, high precision and not easy to break.
  • it is smokeless and burr-free while processing.
  • Perfect cutting ---- the design of 2 flutes, mirror polishing, large chip space of CNC Router Bit makes non-stick crumbs, smooth cutting and fast chip-removal.
  • Package contents ---- 10pcs 2-fluted tungsten steel straight bits assorted in portable storage case.
Check Stock

Bestgle 10Pcs Titanium Router Bits 1/8' Shank Carbide Engraving Milling Cutter Bit Set for Rotary Tools for DIY Woodworking, Carving, Trimming, Drilling

  • Made of high quality high speed steel for long life and exceptionally precise cuts the first time, saving you energy and stress.
  • 10pcs Router Bits including straight, trim, V groove, beading, cove, slot cutter and more to meet your different needs.
  • Easy to use - large capacity chip groove, and spiral cutting edge sharp, greatly enhance the efficiency and quality of products.
  • Shank diameter: 3mm(1/8"), length: 38mm, easy to insert into most mini-grinding rotary tools including for Dremel, Craftsman, Chicago and more.
  • Can be used for detailed woodworking, trimming, engraving, milling, routing slotting, this routing bit works on soft wood and metal including wood, ABS, acrylic, PVC, plastics, etc.
Check Stock