Top End Bearing Router Bits

KOWOOD 14 Pieces Router bit Bearing Replacement Set (for: 15B 24Z 30B 40Z)

  • Bearing Replacement Set is special for 15B 24Z 30B 40Z set.
  • Containing bearings, set screws, lock ring,washers and hex key wrenches.
  • KOWOOD router bits bearing replacement sets are made with Premium Carbide.
  • Replace or repair the damaged or lost router bit bearings.
Check Stock

JET XACTA-Lift with Deluxe Fence (708124)

  • PRECISION ADJUSTMENT HANDLE: Provides up to 2-1/2" of bit depth adjustment.
  • easily removed for a flush routing surface.
  • 11-3/4" X 14-3/4" X 1/4" HEAVY-DUTY ANODIZED ALUMINUM PLATE: Prevents sagging, and lasts longer than plastic router inserts..
  • TWO 3/4" SOLID STEEL SHAFTS: Add rigidity to router bit cutting at desired depth.
  • all moving parts ride on bronze bearing surfaces..
  • ADJUSTABLE SAFETY GUARD: Positions directly above the router bit for safety when in use..
  • 3-5/8" TABLE OPENING: Accommodates larger router bits..
Check Stock

SpeTool 1/4 Shank Carbide End Mill for Aluminum Cut (3 Flutes, 3.5 inch Long) Non-Ferrous Metal Upcut CNC Spiral Router Bit

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/2 inch Cutting Length, 3-1/2 inch for Total Length.
  • The Route Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining..
  • For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Carbide EndMill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

SpeTool Extra Long End Mill for Aluminum 5/16in CNC Router Bits Metal Cutter 3-Flute Tools, 1-5/8in Flute Length, 4in Overall Length

  • Solid Carbide Spiral Router Bit with 5/16 inch Shank and 5/16 inch Cutting Diameter, 1-5/8 inch Cutting Length, 4 inch for Total Length.
  • The Route Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining..
  • For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Endmill Suit for CNC Router and Brand Plunge Router with 5/16" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

Eyech 5pc Router Bit Bearings Set Top Bearings for Router Bit -Interior Dia: 3/16” Outer Dia :3/4”

  • Bearing Type: Top Mounted, Inner Diameter: 3/16”, Overall Diameter: 3/4”.
  • Deep groove geometry for supporting both radial and axial loads and high speeds.
  • Double shielded design to avoid contaminants entering and save lubricant.
  • Replacement Ball Bearings can be used as replacement or upgrade for many popular router bits.
  • Interchangeable bearings for more versatility with your router bits.
Check Stock

SpeTool 3 Flute Carbide End Mill for Aluminum Non-Ferrous Cutting Tool Upcut Bit for CNC Machine, 1/2 Inch Shank, Extra Long 4 Inch

  • Solid Carbide Spiral Router Bit with 1/2 inch Shank and 1/2 inch Cutting Diameter, 2 inch Cutting Length, 4 inch for Total Length.
  • The Route Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining..
  • For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Carbide EndMill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/2" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

Upcut Spiral Flush Trim Router Bit, 1/4 Inch Shank Solid Carbide Flush Trim Router Bits Spiral with Nano Coated by EANOSIC (1/4\ Shank Up-Cut)

  • Professional Flush Trim Router Bit with Top Bearing: 1/4” Shank, 1” Cut Length. The two independent ball bearings with forced on steel collars at the tip of each bit ensures smooth worry free use..
  • INDUSTRIAL QUALITY UPCUT FLUSH TRIM ROUTER BIT: Made of solid VIRGIN carbide with NANO blue coated. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • Up to 2.5X longer life compared to uncoated bits..
  • The 1/4-Inch flush trim Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp..
  • The spiral router bit suit for CNC router and any plunge routers with 1/4" collet..
Check Stock

Downcut Spiral Flush Trim Router Bit, 1/4 Inch Shank Solid Carbide Flush Trim Router Bits Spiral with Nano Coated by EANOSIC (1/4\ Shank Down-Cut)

  • Professional Downcut Flush Trim Router Bit with Top Bearing: 1/4” Shank, 1” Cut Length. The two independent ball bearings with forced on steel collars at the tip of each bit ensures smooth worry free use..
  • INDUSTRIAL QUALITY DOWN-CUT FLUSH TRIM ROUTER BIT: Made of solid VIRGIN carbide with NANO blue coated. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • Up to 2.5X longer life compared to uncoated bits..
  • The 1/4-Inch downcut spiral flush trim Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp..
  • The downcut spiral router bit suit for CNC router and any plunge routers with 1/4" collet..
Check Stock

4Pcs Tapered Ball Nose End Mill 0.25MM-1MM with 0.5MM Tip Diameter CNC Router Bits Set 2D 3D Woodworking Tool 2 Flute CNC Router Bits

  • 【High Quality】The end mills are made of ultra-fine tungsten carbide steel alloy, its nano black coating/titanium coating with high hardness and heat resistance..
  • 【End Mill Bits Set】4Pc【End Mill Set】4Pcs ball nose bit 2-flute, Nano black coat and titanium coat CNC router bits, will satisfying your different needs.s ball nose bit 2-flute, Nano black coat and titanium coat CNC router bits, will satisfying your different needs..
  • 【Parameter】Ball raidus 0.25mm, 0.5mm, 0.75mm, 0.1mm, flute length:15MM, overall length 1.5 inch, single side angle 5.12°..
  • 【Wide Compatibility】Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing,they are compatible with most desktop CNC machines..
  • 【Wide Application】PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, aluminum and other precision parts processing..
Check Stock

LEATBUY 1/4 Inch Shank Router Bit Set & 6 Finger Joint 3Pcs, Tongue Groove Woodworking Wood Cutter, Molding Carbide Milling Tool for Door, Table, Shelves, Wall(1/2-Splicing)

  • 【Size Detail】: All the router bits which shank is 1/4 inch.
  • T-shape tongue & groove router bit tooth width is 1/4 inch, depth is 1/2 inch.
  • Finger joint router bit tooth width is 5/64'', depth is 15/32''. Please check the specific size according to the size picture..
  • 【High Quality】: Produced with solid hardened steel body and industrial grade micro grain carbide blades for a sharper & longer lasting edge, clever anti kickback design ensures safe installation. High hook & shear angles allow cutters to slice smoothly into stock producing clean, splinter free..
  • 【Product Feature】: The finger joint features two flute design, carbide teeth and four removable cutters so you can make joints in a wide range of stock thicknesses.
  • tongue and groove router bit set is works great with all kinds of materials and surfaces like woods, mdf, particle boards, plywood, panels, softwood, hardwood..
  • 【Application】: These durable router bits will let you make one of the most incredibly strong side-toside or end-to-end joints in all wood and wood composites. Great for kitchen and bathroom doors, office cabinets, flooring tables, bedroom shelves, outdoor frames, walls and more. Please avoid cutting ferrous metal and non-wood materials..
Check Stock

Router Bit Storage Tray - Foam Material for Safe Router Bit Storage, 1-5/16 inch Thick and Stores 60 1/4 inch and 50 1/2 inch Shank Router Bits

  • We have all experienced the same issue. We start collecting router bits and little by little we realize that we have nowhere to put them. To even further complicate things, our router bits are both 1/4″ and 1/2″ shanks!.
  • We could always make our own storage out of a piece of wood, but the problem with that is the wood, wears and starts to slip after a while..
  • The 1-5/16″ thick foam router bit tray is a perfect storage solution for all those heavily used router bits that are currently in your drawers, on your shelves or in the router itself..
  • The foam router bit tray fits up to 50 each 1/2″ and 60 each 1/4″ shank bits giving you the ability to store up to 110 router bits in one convenient spot. The holes in the tray wrap neatly and snuggly around the bits to keep them from moving around and keep them out of harms way..
  • Wether you have 100 router bits or just a few, the foam router bit tray is and economical and effective way to keep your bits safely stored away when not in use. ROUTER BITS NOT INCLUDED.
Check Stock

BAYTORY Professional Pattern Flush Trim Router Bit Set with 1/4 inch Shank, 4Pcs 1/2\ Cutting Diameter Carbide Bits with Top Bearing Prevent Tear-Out, Template Guide Woodworking Milling Cutter Tool

  • Precision Cuts: 4Pcs 1/4 Shank Pattern Flush Trim Router Bits Set, Carbide Template Top Bearing Flush Trim Bits Set, Prevent Tear-Out, Perfectly Suitable for Light Work, 1/2 inch Cutting Diameter, Flush trimming machine drill bit insert cutting length:11mm, 20mm, 25mm, 38mm..
  • High Quality: 1/4 Inch Shank Pattern Flush Trim Router Bit, high-quality alloy steel bodies with C3 micro-grain tungsten carbide blades cutting with precision and ease..
  • For Cutting Various Wood Materials: This flush trim router bit can cut and trim solid wood, density boards, MDF, chipboard, splint, and more. Avoid cutting metal and non-wood material.
  • Versatile Woodworking Tool: This flush trim router bit set is preferred choice of professionals and hobbyists alike. Useful for trimming, grooving, etc. Such as DIY project, lettering, and other template work..
  • Wide in Use: Flush trim router bit 1/4 shank, designed for desktop engraving machines (such as CNC hand-held and table-mounted router). It's cannot be used in electric drill & drill machines..
Check Stock