Top Engine Crankshaft Sprocket Kit

Camshaft Locking Timing Tool Replacement for GM Dodge Chrysler Holden Colorado Compatible with Jeep Cherokee Wrangler 2.8L Diesel Duramax Engine VM 9991 VM 9992 EN-50029 EN-50030 EN-51025 EN-51104

  • ◇ Function: Used to lock camshafts and crankshaft in position when setting engine timing. include EN-51104 diesel pump locking tool, fits over the sprocket and engages the teeth as a means to hold the sprocket in position when removing or installing the retaining nut.
  • ◇ The locking tool fits the reluctor on one end, and bolts to the cylinder head face on the other to hold the camshaft in position to set base engine timing.
  • ◇ Fit Engine: VM64C / ENS / 49C / 50C / VM10D / VM11D / LWN / LWH (Duramax).
  • ◇ Application Vehicle: Compatible with Jeep/Chrysler 2.8L Diesel Duramax engines, compatible with Jeep Cherokee 2008-2011.
  • compatible with Jeep Wrangler 2007 onward.
  • compatible with Chrysler Grand Voyager 2008 onward.
  • compatible with Holden Colorado 2012 Onward / Trailblazer.
Check Stock

Cam Sprocket Locking Tool Fit for Harley 2017-UP Milwaukee 8(M8) Engine Model Touring Model 2018-UP Harley Softail

  • Fitment: M8 Locking Tool fits for Harley 2017-UP MILWAUKEE 8(M8) Engine..
  • Function: M8 cam Locking Tool can allows you to easily lock the camshaft and crankshaft sprockets to properly remove, replace and torque the sprocket bolts..
  • Material: M8 Locking Tool made from urethane elastomer with high tear and impact properties..
  • Tips: The side with the notch faces down toward the crank gear. It’s a tight fiting, you will need to move the upper sprocket slightly until it matches up. Helps make the cam change very simple..
Check Stock

BLACKHORSE-RACING Go Kart Torque Converter for Predator 6.5HP 212CC Clutch Set Replaces Comet TAV2 3/4 Inch 30-75 Manco Fit All Engines with a 3/4 inch Straight crankshaft

  • ▲ This kit is made of high quality iron and aluminum, which is sturdy and durable. It fits all engines with a 3/4 inch straight crankshaft and it’s suitable for Go Karts 30 series..
  • ▲ Made of high quality iron and aluminum, sturdy and durable..
  • ▲ Fits: All engines with a 3/4 inch straight crankshaft..
  • ▲ Length: 70.5cm / 27.76", Outside circumference: 27 23/64", Width is 3/4".(1.9cm / 0.75"), Center to Center of driver and driven: 6-15/16 to 7".
  • 1x 10 Tooth Sprocket for #420 /#40 /#41 chain.
Check Stock

Crankshaft Pulley Removal Install Tool Crankshaft Damper Remover Puller Compatible with Jaguar Land Rover 3.0 V6, 5.0 V8 303-1437 303-1438 303-1439 303-1440 303-1441

  • ... Applicable Vehicle Model: fit Jaguar F-Type, XE, XF, XFR, XJ, XJR, XK8, XKR 2009 to 2018.
  • fit Land Rover Discovery 4/Discovery, fit Range Rover, fit Range Rover Sport 2009 to 2018.
  • Remove and Install Crank Pulley: Set of tools required for the removal of the front crankshaft pulley (Crankshaft Vibration Damper) fitted to the Jaguar and Land Rover 3.0lt v6 and 5.0lt V8 petrol engines.It is a must have for removing and installing for land rover jag crank pulley.
  • Worked Perfectly: The crankshaft pulleys used on these engines are tightened to 200 Nm 270 degrees so are very tight to undo and must be held by a substantial holding tool which the kit provides. Also included in the kit are the puller component’s required to remove the pulley without damage.
  • Quality Gurante: Crankshaft crank puller pulley set made of high quality heavy steel, high hardness, strong and durable.All tools have undergone rigorous engine testing, to ensure that thecrankshaft pulley tool can be perfectly adapted to the engine, worked exactly as the OEM tools, and we offer 12 month warranty, let you order no worry.
Check Stock

WeiSen Cam Sprocket Locking Tool Compatible with Harley 2017-UP MILWAUKEE 8(M8) Engine

  • Fitment: Fit for Harley 2017-UP MILWAUKEE 8(M8) Engine Model..
  • Made from urethane elastomer with high tear and impact properties..
  • It can allows you to easily lock the camshaft and crankshaft sprockets to properly remove, replace and torque the sprocket bolts..
Check Stock

49cc 2 stroke Gas Scooter Engine With Racing Air Filter for ScooterX EVO Pep Boys Zoom Bicycle Motorized DIY

  • 49cc 2 stroke Gas Scooter Engine Complete With Racing Air Filter for ScooterX EVO Pep Boys Zoom Stand Up Scooter Bicycle Motorized.
  • 49cc Air Cooled Complete Gas Scooter Engine with Red CNC Racing Intake Manifold High Flow Air Fileter.
  • The engine with built-in square exhaust muffler, centrifugal clutch and gearbox. The engine comes with 3 pieces of output sprockets (14,17 and 20....
  • This is the most commonly used engine for gas scooters, pocket bikes, and many other applications.The engine is compatible with all 43cc 49cc and 52cc....
  • Kit Includes: 1 x 49cc engine with racing air filter, 1 x 14t sprocket, 1 x 17t sprocket, 1 x 20t sprocket.
Check Stock

MAYS 8 Cylinder Engine Kit Mini V8 Model, TOYAN HOWIN FS-V800 1/10 Four-Stroke Water-Cooled Nitro Model for RC Car Boat Physics Science DIY Toy Kids & Adults - Version, 12.34 x 3.2 x 12.73cm

  • ...ign blueprint, it effectively provides higher torque. And the customized flexible oil seal ensures excellent sealing performance in high speed operation..
  • >> Mechanical Water Cooling: The engine is built in a mechanical water cooling pump whose power derives from the crankshaft, which provides circulation power for the coolant and is able to combine the cooling fan for strengthened self-cooling performance..
  • >> Integrated Crankshaft Processing: Designed with 90 degree cruciform crankshaft structure, three-section support, bearing at both ends and middle bearing bush, the engine allows more smooth operation and more sensitive acceleration response with up to 12500rpm. Integrated Exhaust Manifold: The small all-metal integrated exhaust manifold shaped by difficult processing technology makes V8 engine sound more powerful..
  • >> Enjoy DIY Assembly Fun: Crafted from ultra-precise components, the engine model gives strong mechanical sense, enables smooth assembly experience and provide users with fun, helping to build their own V8 engines. 8 Cylinder Engine Model Kit will encourage young boys and girls to learn a....
Check Stock

Camshaft Pulley Holder Crankshaft Harmonic Damper Pulley Holding Removal Tool Compatible with Toyota Lexus

  • 1X crankshaft damper pulley holding tool.
  • Camshaft Pulley Holder Tool: Used it to held the pulleys when remove camshaft pulleys, have two grooved pins to hold camshaft sprockets stationary to remove the bolts, requivalent OEM W89208, compatible with Toyota, Nissan, Camry, Mazda, OHC and many others, the distance between of two grooved pins is 2.36 inches, so please carelly check the size bedfore order.
  • Crankshaft Damper Pulley Holder Tool: Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on engines. only Compatible with Lexus from 1990: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8.
  • Compatible with Toyota from 1996 : 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. fit 4 cyl engine : 1983-1995 22RE, 1995-2004 2RZ,1995-2004 3RZ.
  • Worked Well: The camshaft pulley holder tool have enougt depth to lock the camshaft sprocket, make it fixed, and with rubber handle, not hurt your hands, make replace cam shaft gears and seals more easy.
Check Stock

Caltric Black Drive Chain And Sprocket Kit Compatible with Kawasaki Ninja 300 Ex300 Abs 2013-2017

  • Chain Kit parts packaged with drive chain, engine sprocket, rear sprocket and the other replacement parts (Engine Sprocket Washer, Rear Sprocket Nuts and Cotter Pin etc.).
  • This complete package from Kawasaki contains all the qualified genuine parts required for correct drive chain replacement for each model.
  • Please note that Kawasaki cannot assume any responsibility for damage resulting from incorrect installation.
Check Stock

49CC Motorized Bicycle Kit Bike Engine Kit Single Cylinder 4-Stroke Gas Petrol Motorized Bike Engine Scooter Belt Gear Fits Most 26' or 28' Bikes with V-Frame

  • Fuel Tank Capacity (liter):0.77l (0.81 US qt).
  • Package size: 53cm x 29cm x 29cm (20.9'' x 11.4'' x 11.4'').
  • ★【PACKAGES】1 x Quality 49cc 4 stroke engine.
  • 1 x Gas tank,Plastic gasoline fuel line,fuel value.
  • 1 x Fiber sprocket mounting rings, 9 sprocket bolts, 3 metal retaining segments.
  • 1 x Engine Mounting plate with universal mounting brackets.
  • 1 x Twist grip throttle with built-in kill switch.
Check Stock

Yuesstloo Turbo Engine Timing Tool Kit for Vauxhall Opel Chevy Chevrolet Aveo Cruze 1.0 1.2 1.4, Camshaft Holding Locking Tool Set with Case & Gloves

  • Comes with a portable case, easy to carry and store the tools. Boxes contained crankshaft locking pin, camshaft setting plate, camshaft sensor setting tool x 2, camshaft sprocket holding tool, chain tensioner locking pin x 2, and with a pair of gloves..
  • Made of high-quality steel, durable, strong and stable, rustproof, not easy to deform. Designed to lock the cams and crankshafts in order to allow disassembly and replacement of timing chains adapted at the Vauxhall Opel Chevy engine. Make sure the chain tensioner is completely retracted and held in the retracted position using the suitable pin..
  • Yuesstloo Turbo Engine Timing Tool Kit is compatible with Vauxhall Opel, Adam 1.2 1.4 (2012- ), Ampera 1.4 (2011- ), Astra-J 1.4 (2009), Aveo1.2 1.4 (2011-), Corsa-D 1.0 1.2 1.4 (2009-), Cruze 1.4 (2011-), Cascada 1.4 (2013-), Insignia 1.4 (2011-), Meriva-B 1.4 (2010-), Mokka 1.4 (2012-), Orlando 1.4 (2012-), Zafira-C Tourer 1.4 (2011-).
  • Engine Codes: LWD, L2Z, LDD, LUU/A14XFL, LDD/A14XER, LDD/A14XEL, LUJ/114NET, LUJ/A14NEL, A10XEP, A12XEL, A12XER, A14XEL, A14XER, A14NEL, LUJ/A14NET, LDD/A14XER, LUJ/A14NET, LUH/A14NEL, LUJ/A14NET, LUJ/A14NEL, L2Q/A12XEL, LDC/A12XER, LWD/A12XEL, LDD/A14XEL, LDD/A14XER, LWD/A12XEL, LDD/A14XEL, LDD/A14XER.
Check Stock

Sibosen Torque Converter for Predator 212CC, 3/4' Go Kart Comet CVT Clutch 10T 40/41 and 12T 35 Chain Engine Drive Replacement Set of 30 Series

  • ✅Quality Ensurance for More Power: This go-kart torque converter is made of high-quality iron and aluminum material which is lightweighted, sturdy and durable while allows higher speeds out of small engine, and smoother acceleration. This clutch will help you get more power out of your small engine by reducing engine load..
  • ✅Complete Parts for Easy Assembly: This torque converter fits a 3/4" shaft and comes with a 10 tooth sprocket for a #40/41/420 chain and a 12 tooth sprocket for a #35 chain. It will work with engine sizes hp2 to 8hp. 30 series Asymmetrical design. Important parts have been assemblied.
  • ✅Universally Fit: This go-cart torque converter kit replaces OEM part numbers: Comet 218353A, 219552A, 219456A, 217610A, 203814A, TAV2 30-75, Yelf Dog Drive Unit Q43201W.
  • ✅Package Includes: 1 x 3/4" Driver Pulley.
  • 1 x 10 Tooth Sprocket for #40/41/420 Chain.
  • 1 x 12 Tooth Sprocket for #35 Chain(Chain not included).
Check Stock