Top Fitting Valve
Propane Torch Weed Burner Torch - Weed Torch with Push Button Igniter and 6.5 ft Hose, High Output Outdoor Torch Kit for Garden Stumps Wood Ice Snow Roofing
- SOFT-HOSE P.O.L SAFETY VALVE DESIGN - Fitted with a 7/8"-14 TPI, left hand male propane bottle connection with a steel tip diameter of 2 3/8”, the screw is 1/4 18 NPT P.O.L..
- The operation to remove the hose: Reverse thread POL safety valve (loose by turning right, tight by turning left). Soft hose P.O.L valve fitting connect to any standard propane tank with an OPD valve. Brass valve construction and valve spool designed for use with standard size propane tanks.Size for fitting of the Propane Tank: 7/8-14LH (tank not included)..
- Latest 360 Degree Swivel Flame Mechanism. Maximum Flame length is 28 inch. Flame Back flow Prevention..
- Satisfactory Service: We provides THREE-YEAR FACTORY WARRANTY and a return/replace policy against defects in material and workmanship..
- Multifunctional Use: Burn wand and stumps, melt snow, sear meat or fish, light fires, solder, do wood grain burning, soften asphalt, remove paint from non-flammable surfaces..
Check StockIce Maker Water Valve 2315576 4318047 2315508 For Whirlpool Refrigerator New
- Ice Maker Water Valve 2315576 4318047 2315508 For Whirlpool Refrigerator New.
- Refrigerator Water Inlet Valve,This valve will fit most brands such as Whirlpool, KitchenAid, Roper, Estate, Kirkland, Magic Chef, Maytag, Admiral,....
- It is a single solenoid valve with a 1/4" inlet & outlet which is standard. This valve has the new "John Guest" style fitting which allows you to just....
Check Stockmistcooling High Pressure Misting System 1500 PSI - Flexible (60 Feet - 20 Nozzles)
- ...ure Switch or no cut off water switch will turn pump off, if no water supply - Thermal Safety Swithc - Maximum Speed 1800 rpm - Full load Amps. (0.15/ 0.30 gpm.) 1.38/ 2.00 Amps - Noise level: 75 DB - Maximum Inlet Pressure–100psi.
- Filter: - 5 Micron Filter - Filter in the package comes with 3/8 inch inlet- outlet fitting. - Standard pump comes with ¼ inch push lock type fitting.
- However, it is placed on 3/8 inch male and ¼ inch female adapter. - Outlet comes with ¼ inch fitting as standard.
- however, depending on package requirement it can be modified to 3/8 inch. - Scale free filters can also be added to mist systems to prevent clogging of nozzles due to hard water..
- Tubing - ¼ Inch OD Tube - Rated for 1500 PSI - Nylon Tubing - UV Treated - Available in Black, White, Beige and Grey Colors.
- Fittings - ¼ Inch - Push Lok – Push to Connect - Nickel Plated - Rated for 2000 PSI - Re-Usable - Misting Tee comes with 10/24 threads - End Plug – Simply connect it to the misting Tee. MC13040-MC13041.
Check StockRobinair 18560 A/C and Refrigeration Valve Core Remover/lnstaller
- Robinair Air Conditioning Valve Core Remover and lnstaller - the ideal tool for replacing damaged valve cores or performing A/C or refrigeration service that necessitates valve core removal.
- Attaches to 1/4 inch male flare access fittings and allows valve core removal and replacement without loss of refrigerant.
- Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a slower to operate stem-type valve.
- Ball valve features a corrosion resistant stainless steel ball for smooth action and a reliable seal.
- Durable brazed side fitting allows system access for various A/C service procedures.
Check StockHONEYWELL 32001639-002 Solenoid Valve HE220, HE225,HE260, HE265 New Replacement
- Honeywell 32001639-002 24V Humidifier Water Solenoid Valve.
- FOR HUMIDIFIER MODELS: HE220, HE225, HE260, HE265.
- The Replacement Valve Strainer is Included and installed in the brass fitting ! Exceeds OEM Valve from Honeywell.
- The replacement 24 volt valve for Honeywell models: HUMIDIFIER WATER VALVE This is the kit for replacing defective Honeywell Humidifier Water Valves. This is a REPLACEMENT Kit FOR Part 3200-1639002.
Check StockLichamp R134a Can Tap, Automotive R 134a Self Sealing Can Tap and Puncture AC Freon Can 134a Adapter Fittings, TA02
- Freon Can Tap - Smoothly connect manifold gauge hose with the r-134a freon refill cans to properly fill your ac system..
- Compatibility - Include both r 134a self sealing and puncture style can taps, fits EPA-required self-sealing freon can and the old-style single puncture bottle..
- Tank Adapter and Valve Core Remover - Comes with extra tank adapter for connecting 1/4" SAE tap fitting to 1/2" ACME hose fitting. Dual head valve core tool will easily remove small or large valve cores..
- Long Lasting Materials - The can tap are made of solid premium brass and aluminum which make them can even work under extreme conditions, features with industrial grade rubber seals to prevent leaking..
- Easy to Work - Benefit from precise threading technology and precise valve control, you can assemble and operate efficiently without worrying about loose or leaking connections..
Check StockCamco 39857 RhinoFLEX Clear 90 Degree Sewer Hose Swivel Fitting
- Clear fitting to see if holding tank is empty.
- Swivel lug and bayonet fitting for secure connection.
- Connect sewer hose to your RV’s waste valve fitting.
Check StockOTC 6080 Fuel Injection Test Kit for Master Cummins Diesel Engine
- Includes the fittings and gauge needed to check fuel pressure fuel volume and fuel restrictions from the delivery pump to the injection pump.
- Kit includes special quick-disconnect banjo fitting two fuel injection quick-coupler adapters quick-disconnect banjo fitting gauge assembly and fuel volume test adapter.
- Also includes a diesel fuel inlet restriction test adapter for 1988-98 Dodge pickups and vans with 5.9L 12-valve and 1998-1/2-newer 5.9L 24-valve Cummins diesel engines.
Check StockYeleah Feed Water Adapter Angle Stop Adapter Valve Cold Water Supply Valve Compression 1/4 X3/8 X3/8 for Reverse Osmosis Refrigerator Ice Maker Coffee Brewers
- 1/4"X3/8"X 3/8" Angle Stop Water Valve Adapter ,Brass Feed Water Adapter Compression Valve,Made Of One Piece Design Lead Free Brass And A....
- 1/4"X3/8"X 3/8" Compression Valve Female Male t Valve Tee Valve Mixing Valve Adapter With Seals,Sink RO Water Line Splitter,Frigerator Ice Maker....
- Water valve tap ,Reverse Osmosis Water Faucet Adapter Splitter,Water Line Adapter Splitter Valve 1/4" Compression Fittings Can Be Connected 1/4" Pex....
- 1/4 Fridge Ice Maker Water Line Splitter ,Under Sink Water Valve Adapter Can onto the normal 3/8 Compression Fitting that most everyone has at the end....
- 1/4 Angle Stop Valve Adapter Fits Most American Home Kitchen Sink 3/8"Angle Stop Valve ,Water Diverter Valve Stop Valve, Copper Line Refrigerator Ice....
Check Stockmistcooling 250 PSI Misting Pump
- Max pressure 250 psi Available in 110 V, 220 V & 12 VDC Durable Rust Proof Enclosure Thermal Safety Switch Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps Standard pump inlet: 3/8-inch push lock Fitting. Standard Pump outlet: ¼ inch Push-lock fitting. Max pressure 250 psi 110 V AC.
- 1. Solenoid Valve Solenoid valve controls the flow of the water in to the pump. You may leave the inlet water source on at all the time. Water will enter the pump only when main power switch is turned on. Likewise, water flow will be cut off when power switch is turned off. No adjustment is ever required for solenoid valve..
Check StockTOCHUN IBC Tote Butterfly Valve DN50 -Heavy Duty 75mm Taps Drain Connector for Water RainWater Tank-IBC Fittings Garden Irrigation Valve
- ...QUALITY IBC TOTE ADAPTER】The IBC tote valve introduces foreign technology, made of high-density polyethylene and other engineering plastics. It is assembled with novel structure and beautiful appearance. It has been used safely for 3,000 times and passed the drop test..
- 【SAVE TIME AND ENERGY】This IBC tote fitting is easy to install,just connect to the Water tank and you can Use it. The water tank adapter supplied with superior quality silicone gasket, which can effectively to prevent liquid from splashing around. Super durable and can be used repeatedly that perfectly save you time and money!.
- 【REPLACEMENT TOTE WATER TANK ADAPTER】This IBC tote valve is mostly used for chemical process and acid, liquid storage buckets, and tanks outlet control valves to prevent liquid leakage. This IBC tote fitting has the advantages of anti-corrosion, acid and alkali resistance, durable, high mechanical strength, easy opening and so on..
- 【PACKAGE INCLUDED】2.95’’ IBC Adapter Ball Valve + IBC Tote Valve Cover + Spout Cap + Silicone Gasket (NOTE: Please carefully check the size of the IBC Tote Ball Valve before purchasing)..
Check StockSTYDDI Solid Brass Rain Barrel Spigot, Quarter Turn Ball Valve Faucet with Heavy-Duty Bulkhead Fitting Adapter for Aquariums, Water Tanks, Tubs, Pools
- ... their valuable time to search for such a water spigot because here it is..
- ALL SOLID BRASS CONSTRUCTION FOR DURABILITY - This is a heavy-duty brass quarter turn water spigot, specifically designed for rain barrels. The all brass construction including solid brass bulkhead fitting makes it a excellent pick for long-term use. Coming complete with water-proof washers and solid brass nuts, which is perfect for DIY rain barrels or replacement applications..
- PACKAGE INCLUDED - This rain barrel spigot kit includes a 1-1/8 inch brass rain barrel quarter turn ball valve spigot and a 3.14 oz brass bulkhead fitting with 1-1/8 inch female thread. The thread of the water spigot input is 1/2" NPT Male, while the output thread is 3/4" GHT Male compatible for any garden hoses. It also comes with a seal tape and two water-proof washers..
- TWO INSTALLATION METHODS AND TOOLS NEEDED - The brass bulkhead fitting can be front mounting or back mounting. When installing, a electric drill is needed for drilling a 1-1/16 to 1-1/8 inch diameter holes, and also need a pipe wrench or adjustable wrench. This kit suits for rain barrels whi....
Check Stock