Top Hss Drill Extension
KHCRAFT Bi-Metal Hole Saw Kit High Speed Steel M42 with Cobalt 8% for Metal and Wood 13-Piece General Purpose 3/4
- 9-piece hole saws: 3/4"(19mm), 7/8"(22mm), 1-1/8"(29mm), 1-3/8"(35mm), 1-1/2"(38mm), 1-3/4"(44mm), 2"(51mm), 2-1/4"(57mm), 2-1/2"(64mm).
- 4-piece accessories: arbor 9/16"-1-3/16" with shank 3/8".
- arbor center drill with shank 1/4". Center drills in this kit are all made of real HSS M2 and fully ground, while a lot of bi-metal hole saw kits are with low grade HSS center drills roll-forged..
- with max cutting depth 1-3/8" (35mm) and ideal for drilling on sheet metal (even high strength metal because of HSS M42 with cobalt 8% teeth), wood, plastic, plasterboard, Aluminium, etc.. Particularly for sheet metal: the cutting depth is 2mm to 5mm, depends on the hardness of the metal and taking hand drill or machine drill.
- HSS bi-metal hole saws are much better than and totally different from any carbon steel ones (work on wood only, no metal)..
- Packed in high quality carrying case. Please note that it shows "HSS M3" on the carrying case but actually it is made of HSS M42 with cobalt 8%. You could see it on the hole saws.DescriptionHSS M42 with cobalt 8% bi-metal hole saw kit / hole saw set: 9-piece hole saws and 4-piece accessories (drills are made of HSS M....
Check StockFTG USA Countersink Drill Bit Set 5 Pc Countersink Drill Bit #4 6 8 10 12 Tapered Drill Bits Secured with Pin to 1/4 Hex Shank 1 Allen Wrench Counter Sinker Drill Bit Set for Woodworking
- FTG 2337P has Bits Secured with Pin. Drill bits designed as reliable woodworking tools. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Countersink drill bit set for wood with tapered drill bit, 4 Flute cutter, 5 size drill bits sets with countersink #4(7/64") #6(9/64") #8(11/64") #10(3/16") #12(7/32") 2 Stop Collar, 1 Allen Wrench. Counter-bore, and wood plugs size 3/8" and 1/2".
- FTG BITS SECURED with Pin Never Come Loose from shank. Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
- DRILL PERFECT tapered hole drill bit every time. Wood drill bit set with counter bore chamfer angle 82-degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality-built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable w....
Check StockYAKAMOZ 30Pcs Thread Repair Insert Kit Damaged Threads Rethreading Drill Bit Taps Tool Set for Helicoil Type Metric M6 Internal Screw Holes Repairing
- Master helicoil thread repair kit used for creating stronger internal threads in all metals, composites, polymers and other materials by repairing damaged or stripped internal threads and regaining the original thread size..
- 304 Stainless thread inserts create longer lasting durable threads, increase the possibility of higher torque application in weaker metals..
- Master thread repair kit includes a collection of tools including HSS drill, tap, thread inserts, installation tool, break pin tool..
- Metric Size: 5pcs HSS drill bits, 5pcs HSS taps, 5pcs break pin tools.
- Includes 25 Each thread inserts: M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5.
- SAE Size: 5pcs HSS drill bits, 5pcs HSS taps, 5pcs break pin tool.
- Includes 25 Each thread inserts: 1/4''-20, 5/16''-18, 3/8''-16, 7/16''-14.
Check StockYESKING 50-Piece Bolt Extractors Screw Extractor Set, Easy Out Bolt Extractor Set Stripped Screw Remover and Drill Bits for Removing Broken Studs,Frozen,Rounded-Off Bolts
- 【50-PIECE MULTIFUNCTIONAL EXTRACTORS SET】: This is a set of 4-in-1 screw & nut remover kit and drill bit kit.It contains 13pcs multi-spline screw extractors, 16pcs left hand HSS drill bits, 6pcs spiral screw extractors,13pcs nut removers,1pcs extension bar and 1pcs ratchet wrench.Multiple specifications and sizes to meet your various work needs..
- 【HIGH QUALITY HSS & CR-MO】: The drill bits of this extractor set are made of high speed steel. The screw and nut extractor kit is made of chrome molybdenum steel. These two excellent materials are harder and tougher and can be used for a variety of metal fasteners. The reverse spiral groove design bends downward to provide maximum grip..
- 【HIGH CARBON STEEL DRILL BITS】: 135° angle design of the head for easier access to fasteners and improved efficiency.High speed steel, strong than cobalt bits and not easy to wear. Surface titanium nitride coating, effective anti-corrosion and anti-rust, prolong the service life..
- 【CR-MO NUT REMOVERS】: All premium industrial grade bolt extractors are tightly designed. Grip firmly, not easy to fall off, provide more torque. ....
Check StockYakamoz 5Pcs Taper Drill Countersink Set 1/4 Hex Shank Countersinks with Tapered Point Pilot Drill Bits for Woodworking
- Quick change 1/4" hex shank for power drill, 7/64", 9/64", 11/64", 3/16", 7/32" HSS taper drill bits ideal for installing screws..
- Use these countersinks to drill the pilot hole and countersink hole in one step..
- 4-Flute cutter countersink and tapered drill bit provide superior speed and ideal finish..
- Adjustable countersink along taper drill to get proper pilot hole depth for different length screws..
- Made of High Speed Steel (HSS) drill bits with alloy steel countersinks, good cutting performance on hardwoods and composites and long life use..
Check Stock5mm Drill bit M35 Specialist Metal Drill Bits, Twist Drill Bit Set, HSS-CO Twist Drill Bit Stainless 1.0-5.0mm for Drilling Stainless Steel Cast Iron Sheet Metal Steel Plate Angle Iron(5mm)
- [High Hardness]: This 5mm cobalt drill bits sets are made of M35 material and contain 5% cobalt, which effectively improves its hardness and ensures stable performance.
- [10 Sizes Available]: There are 10 drill bit sizes for this hss drill bit set, and each pack has 10 identical drill bits, you can choose according to your needs.
- [High Grinding Precision]: This 5mm twist drill high speed steel bit has a high surface finish, which is very suitable for drilling stainless steel, cast iron, sheet metal, steel plate, angle iron.
- [35-degree Bifurcated Tip]: This 5mm hss high speed m35 cobalt twist drill uses a 135-degree bifurcated tip design, and starts drilling immediately with a small force.
- [Wide Application]: This 5mm hss drill bit set is sharp and durable, which can be widely used for drilling stainless steel plates, automobile spring steel and die steel.
Check StockTOMMARS 35PCS Bolt and Screw Extractor Set incl. Drill Bit Kit Multi-spline & Sprial Extractors Remover Easy Out Tool for Broken Stripped Screws, Studs, Bolts ect.
- For quickly removing stripped or broken screws, socket screws, studs and broken off bolts without damaging surrounding area..
- The extractors are made of higher qualilty CR-MO steel, which has high hardness good toughness, higher strength than chrome vanadium steel. The Drill Bits are made of 4241HSS materials. NOTE: drill bits should not be used for stainless steel..
- Widely Application: Spiral flute extractors for using on common fasteners where lower torque.
- Multi-spline Extractors for using on higher torque or lower profile tools. HSS Drill Bits for drilling out the interior of the fastener..
- Set includes: 6 PCS Spiral flute extractors ( 3/32″ to 7/8″).
- 13 PCS Multi-spline extractors ( 1/8″ to 1/2″ ).
- 16 PCS HSS drill bits ( 5/64″ to 1/2″).
- Can be used with electric hand drill, flat or allen wrenches, tap adapters. Must be slow and gentle when used!!!.
Check StockHanson 1765531 Pts Drill Plus Tap Combo 6-32' Number 36 for Tap Die Extraction
- This tap and drill set contains a convenient HCS tap and HSS drill bit.
- Self-aligning taps start and thread straight virtually every time.
- Great for through holes and irregular surfaces.
- Plug taps are ideal for general purpose threading.
- Special chip-breaking technology cuts chips easier.
Check StockDrill America 5/8'-18 Tap and 37/64' Drill Bit Kit, POU Series
- Set contains high speed steel plug hand tap and matching high speed steel drill bit.
- High speed steel plug hand threading tap is popular for use in general machine tapping or cnc tapping.
- Black oxide drill bit is ideal for production, maintenance or portable drilling jobs.
- 5/8"-18 hss plug tap and matching 37/64" hss 1/2" shank drill bit in plastic pouch.
Check StockJEFE HEX 9-Piece Drill Bits Set-1/16\
- 【Premium HSS Titanium Coating】High speed steel (HSS) with titanium coating gives Jefe Hex drill bit great durability and prolongs 3 times longer life than drill bits without coating..
- 【Easy Cut Split Point】Jefe Hex Easy Cut Point design makes drilling easy with less pressure and prevents drill bit walking on the working surface. Fully ground modified parabolic flute design clears chips quickly, decreases friction and heat damage. Tapered web provides durability and reduces breakage..
- 【Quick Change】1/4" (6.4mm) hex shank fits into standard power tools and impact drivers. Jefe Hex drill bit’s solid bonding technology manufacturing eliminates radial runout and improves concentricity. High torque, impact-rated accuracy..
- 【Applications】 - Jefe Hex drill bit sets are built for general purpose applications, such as DIY projects, home maintenance and MRO (Maintenance, Repair and Operations). Working materials include steel, copper, aluminum, zinc alloy, cast iron, wood and plastics..
- 【Package & Size】 - 9 pcs drill bit set in a double blister pack with easy opening design. Size range: 1/16.
Check Stock3/32-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12
- JOBBER LENGTH: 3/32-inch cutting diameter, 1-1/4-inch flute length, 2-1/4-inch overall length, 118 degree point, straight shank.
- MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
- CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
- APPLICATION: best used for drilling in hard metal, including stainless steel.
- INCLUDE: 12 pieces of 3/32-inch cobalt drill bits with case.
Check StockDrill Hulk 13-Piece M35 Cobalt Drill Bit Set for Hard Metal, Stainless Steel, 1/16-Inch to 1/4-Inch, Jobber Length, 3-Flat Shank
- JOBBER LENGTH: jobber length cobalt drill bit, 135 degree split point reduces drill walking, 3-flat shank provides a secrue grip in chucks.
- MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
- CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
- APPLICATION: best used for drilling in hard metal, including stainless steel.
- INCLUDE: 13 pieces cobalt drill bits in inch sizes 1/16" to 1/4" (1/64" increments) with plastic case.
Check Stock