Top Hydraulic Quick Disconnect Coupling

Rego 7141M Quick Disconnect Service Check Valve Connector, 3/8

with quick disconnect coupling and constant level humidity pan with 2 humidity pads.

Converts your 3 Embers dual fuel grill to natural gas.
Tools needed for installation not included: two adjustable wrenches, phillips screwdriver, pipe-thread sealant.
Converts these 3 Embers Grill Models - GAS7480AS & GAS7480BS.
Check grill owners Manual for conversion instructions.

Cable Range: 12-15mm, Wire Size: ≤2mm² or 14AWG, Contact Diameter: Φ1.8mm.
Rated Voltage/Current : AC 380V/10A, Resistance: 2mΩ.
Protected against solids & liquids, provide a secure and reliable connection in the harsh environment..
Waterproof IP68, threaded coupling, quick disconnect, solder male female cable plug.

【Perfect Fit】 Suitable for excavator brand includes: Caterpillar, CAT, Case, komutsu, Komatsu, Daewoo, Hyundai, Kato, Hitachi, Kawasaki, Komastu, Kobelco, John Deere, Sumitomo, Bobcat, Sany, Sumitomol. Quick release connector fits for both USA and Japanese brand excavator. Precisely measures the pressure of hydraulic system in the excavator construction machines etc..
【What You Get】 70M Digital Hydraulic Pressure Test Coupling Kit Comes with ① Qty-2 10000PSI Digital Pressure Gauges (with protective cover).
② Qty-2 63in (1.6m) Test Hoses with M16*2 end and BSP 1/4" female end respectively.
⑤ Qty-1 Waterproof Aluminum Storage Case..
【Measurement】 Digital Gauge Max Work Pressure: 0 - 10000PSI / 700BAR / 70MPa - Ø80mm. 9 Type Test Couplings: G1/4, G1/8, G3/8, M10*1, M10*1.25, M14*1.5, UNF7/16-20, UNF9/16-18 and NTP1/4..
【Better Accuracy】 Hydraulic Pressure Gauge consists of premium grade pressure sensor and electronic components. High precision and stability. Precisely measures gas, liquid, oil and non-corrosive mediums of stainless st....

Cable Range: 12-15mm, Wire Size: ≤2mm² or 14AWG, Contact Diameter: Φ1.8mm.
Rated Voltage/Current : AC 380V/10A, Resistance: 2mΩ.
Protected against solids & liquids, provide a secure and reliable connection in the harsh environment..
Waterproof IP68, threaded coupling, panel mount, quick disconnect, solder plug & socket.

Maximum operating pressure of 10,000 pounds per square inch (psi)，Two-speed Plunger Improves Pump Efficiency By 70%.
Advances and releases design for applications with a constantly applied load Pressure relief valve (Oil return knob)helps prevent pump overload, switch( venting nut) on the tail of it avoid sealed of oil box.
Oil capacity: 700cc, 2M high pressure hose ，oil pipe coupling with PT3/8 thread.
Manual Hydraulic Pump is durable, smooth surface and good sealing performance. Integral Casting Pump Body, Durable, Stable And Reliable.
High-pressure hydraulic hand pump for 5 ton to 200 ton hydraulic ram cylinders or split unit hydraulic puller and other hydraulic applications.

003cb003e→Multiple Choices:003c/b003eThere Have Three Hydraulic Quick Coupling Supply Which Include 003cb003eThe 1/2.

...h-flow, zero fluid loss, and long service life. It meets the standards of ISO 16028, perfect for connecting your hydraulic lines..
Quick Connecting: The sleeve locking mechanism (with 3/4" NPT thread) makes the couplers easy to connect with a simple push. Rotate the collar to lock them tightly, preventing accidental disconnection. If you need to disconnect it, aim the point at the gap, then give a pull. Connection is simple, effortless, and requires minimal force..
Hardened Steel Construction: Our quick couplers are strongly built with hardened stainless steel to resist deformation and high temperatures. The zinc-nickel plating provides high resistance against rust and corrosion. They are built tough to last for years to come..
Dust Covers Included: Dust caps are included to prevent dirt from disrupting the connecting system, preventing the risk of malfunction. The retaining ring is covered by a sleeve. Additionally, a dust seal is placed within the spring area..
High Compatibility: The quick coupler set is designed for applications where hydraulic spillage is likely to occur. It can be interchanged with most types of skid steers loaders, such as Bobcat, John Deere, CAT, Case / New Holland, Kubota, and many others..

Cable outer diameter range: 12-15mm, Wire Size: ≤4mm² or 11AWG, Contact Diameter: Φ2.8mm.
Rated Voltage/Current : AC 380V/25A, Resistance: 1mΩ.
Protected against solids & liquids, provide a secure and reliable connection in the harsh environment..
Waterproof IP68, plastic shell, threaded coupling, panel mount, quick disconnect, solder, angled cable plug & panel mount socket.

→Multiple Choices:There Have Many Hydraulic Quick Coupling Supply Which Include: The For 4BD4FI Manifold Block (46mm Thread Diameter) And 4BD4FH Manifold Block(48mm Thread Diameter)Hydraulic Quick Connect Couplers.Please Select On the Size Name Option And confirm manifold block before ordering..
→Couplers:Compatible With All Standard 1/2" Body ISO 16028 Couplers.
→Technology:Allows Connection Under Pressure.Locking Sleeve To Prevent Accidental Disconnection.Flush Face Valve Design Minimizes Fluid loss And Air Inclusion.
→Aftermarket Replacement And Interchangeable With: Bobcat 6680018 | Kubota V0511-77150.

...h-flow, zero fluid loss, and long service life. It meets the standards of ISO 16028, perfect for connecting your hydraulic lines..
Quick Connecting: The sleeve locking mechanism (with 1/2" NPT thread) makes the couplers easy to connect with a simple push. Rotate the collar to lock them tightly, preventing accidental disconnection. If you need to disconnect it, aim the point at the gap, then give a pull. Connection is simple, effortless, and requires minimal force..
Hardened Steel Construction: Our quick couplers are strongly built with hardened stainless steel to resist deformation and high temperatures. The zinc-nickel plating provides high resistance against rust and corrosion. They are built tough to last for years to come..
Dust Covers Included: Dust caps are included to prevent dirt from disrupting the connecting system, preventing the risk of malfunction. The retaining ring is covered by a sleeve. Additionally, a dust seal is placed within the spring area..
High Compatibility: The quick coupler set is designed for applications where hydraulic spillage is likely to occur. It can be interchanged with most types of skid steers loaders, such as Bobcat, John Deere, CAT, Case / New Holland, Kubota, and many others..