Top Oil Line Fitting

LTI Universal 10ft Nylon Stainless Steel Braided 5/8\ AN10 PTFE E85 Fuel Line Hose Injection (BLACK, 10AN)

  • ...along with a braided Black Nylon outside which gives them high durability, extreme pressure resistance, and Professional installation is highly recommended..
  • 10AN PTFE E85 Fuel Hose Length: 10ft. Inner Diameter: 0.5" (12.95mm). Outside Diameter: 0.62" (16mm) . Please measure before purchase! Fit for AN PTFE hose end fitting ONLY..
  • We Provided 12 months warranty from the date of purchased. Free return within 30 days NO QUESTION ASK..
Check Stock

10AN Femlae to 8AN Male Flare Reducing Hose Union Fittings Aluminum AN10 to AN8 Reducer Fuel Oil Line Adapter Black

  • JIC -10 AN (7/8-14) UNF female to male flare -8 AN (3/4"-16) UNF Thread expander / reducer pipe connector.
  • Made of High Performance Lightweight 6061 T6 CNC Machined Billet Aluminum Material.
  • Black anodized finish for durability, long last and strength.
  • Universal fit. such as: Oil/ Fuel/ Water/ Gas/ Fluid/ Air Line.
  • AN Female to Male Oil Fuel Line Pipe Redecer Extensions Fitting Adapter.
Check Stock

MOTAFAR 6AN 45 Degree Swivel Hose End Fitting for Braided Fuel Line Aluminum Black

  • 6AN 45 degree hose end fitting is suitable for all oil/ fuel/ water/ fluid/ air line, fit all stainless braided and nylon braided hose, can't fit PTFE fuel line and rubber fuel line.
  • Max working pressure is 1000psi, working temperature range is -65℉ to 252℉ (-53℃ to 122℃).
  • Designed for smooth flow, easy assembly, completely reusable, just disassemble and put onto another hose.
  • No leakage under high pressure and temperature.
  • Black anodized for durability, great appearance, and anti-corrosion.
Check Stock

Rac Performance 8AN to 10AN Expanding Hose Fitting 8AN Female to 10AN Male Flare Extender/Reducer Aluminum 8AN to 10AN - 2Pack Black

  • 8AN Female to 10AN Male Flare Hose Union Expander.
  • Black anodized finish for great appearance and suitable for most fluids.
  • Made of high‑quality lightweight 6061-T6 aluminum material for strong strength.
  • Fuel Hose Line Fitting fully compatible with gasoline and alcohol based fuels.
  • Universal application for Oil cooler / Gas / Water / Fuel tank / Fuel pump/ Fluid Line/ Air Line.
Check Stock

EVIL ENERGY 6AN 90 Degree Swivel Hose End Fitting for Braided Fuel Line Aluminum Black

  • The female AN6 90 degree swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Max Working Pressure: 1000psi. Working Temperature Range: -65℉ to 252℉ （-53℃ to 122℃). Can be suitable for competition applications where reduced weight is needed..
  • 6AN 90 degree swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line ,clutch hose,turbo line etc. Our swivel fitting is work with nylon braided fuel hose . They are not compatible with PTFE hose, E85, rubber hose ..
  • These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle if you do not want them to stay in the original place..
  • Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to help prevent any galling..
  • EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and servic....
Check Stock

NEIKO 30252A Water and Oil Separator for Air Line | 1/4' NPT Inlet and Outlet | 90 PSI | Air Compressor and Air Tool Accessory | Protect Lifespan of Pneumatic Tools | Water Moisture Filter Dryer

  • ...monitor the buildup and the amount of water and dust particles that this filter has trapped. Quick release valve conveniently located to removed anything trapped inside..
  • SPECIFICATIONS: Each in line air compressor moisture filter comes with a 1/4” NPT inlet and outlet for any standard air hose with a quarter inch fitting and can handle pressure to 90 pounds per square inch. Durable aluminum housing construction with brass fittings..
Check Stock

NEW WILWOOD GO KART BRAKE SET WITH CALIPER PADS MASTER CYLINDER & LINE KIT FOR 1/8 ROTORS GREAT FOR KARTING JR DRAGSTER ETC SOUTHWEST SPEED

  • Wilwood Karting Kit with Brake Caliper & Pads, Master Cylinder, 5' of Nylon Line, & 90 Degree Fitting to use with Caliper if necessary. (Wilwood Part #120-5498, #260-5520, #928-503, & #928-560)..
  • Wilwood Karting Kit with Brake Caliper & Pads, Master Cylinder, 5' of Nylon Line, & 90 Degree Fitting to use with Caliper if necessary. (Wilwood Part #120-5498, #260-5520, #928-503, & #928-560). Kit Includes: Wilwood Go-Kart Caliper for .125" Rotors Fits 0.125" Thick rotors Features Two 1.00" Pistons Weighs only 1.2 lbs. Comes with high friction brake pads..
  • Wilwood Go-Kart Master Cylinder with a 1/2" Bore 1/2" Bore Weighs only .55 lbs. This super lightweight aluminum master cylinder designed specifically for kart & jr. dragster racing applications incorporates an adjustable lever ratio with a remote mount clear fluid reservoir for easy monitoring The assembly comes ready to install and includes billet bracket, lock-wired drilled hardware, & fluid line fitting ..
  • 5 Feet of -3 Nylon Brake Line 3/16" Nylon tubing 5' Should equip most karts with some left-over..
  • 90 Degree Fitting for Caliper Depending on how everything is mounted, the line might run to the caliper at a bad angle for the straight fitting. This 90 degree fitting instal....
Check Stock

EVIL ENERGY 6AN Y Adapter Block Coupler Union Fitting Splitter Flare Male Thread Aluminium Alloy Black

  • -6 AN to dual -6 AN Y fitting is made of aluminum alloy 6061-T6,and hard-anodized coating is compatible with alcohol, exotic fuel-additives, water and oil.It is suitable for fuel system components such as fuel hose line fitting, fuel pump, fuel filter, etc..
  • The thread size of the 3-way union Y block splitter is 9/16UNF.They are sealed by a 37 degree angle, which is easy to install and avoid leakage.Ideal for any liquid or gas application requiring a high flow separator..
  • Compared with the T fittings with 90 degrees, male flare thread Y connector split flow at 60 angles can presant less flow obstruction.
  • All three ends have a male AN fitting，the block can flow both ways..
  • EVIL ENERGY provide this product have 3-month warranty.Please contact us first if you have any doubts after receiving the product..
Check Stock

EVIL ENERGY 6AN Straight Swivel Hose End Fitting for Braided Fuel Line Aluminum Black 2PCS

  • The female AN6 swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Max Working Pressure: 1000psi. Working Temperature Range: -65℉ to 252℉ （-53℃ to 122℃). Can be suitable for competition applications where reduced weight is needed. Package: 2 PCS..
  • 6AN swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line, clutch hose, turbo line etc. Our swivel fitting is work with nylon braided fuel hose. They are not compatible with PTFE hose, E85, rubber hose..
  • These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle if you do not want them to stay in the original place..
  • Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to help prevent any galling..
  • EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

YuanTenhwy 3 PCS 3/8 10mm Brass Hose Barb Tee Fittings With 9 PCS Stainless Steel Clamps For Air/Water Hose Splicer 3-Way-T…

  • 【Size】: The outer diameter of Hose barb fitting is 3/8 inch (10mm).
  • 【Packing list】: 3 PCS of 3-way(Type T) Hose barbs fitting with 9 PCS of stainless steel hose clamp.
  • 【Material】: The hose barbs fitting is made of brass, and the hose clamp is made of stainless steel.
  • 【Features】: corrosion resistance, dimensions in line with standards, and overall smooth without burrs.
  • The solid barb and hose clamp ensure that the hose and the Hose barb fittings are well sealed during connection, and are not easy to leak.
  • 【Application Scenarios】：It is applicable to pipeline installation and maintenance, and is often used to assist in the transportation of gas, water or oil. However, federal laws do not allow the installation of these fittings for drinking water in the United States and its territories..
Check Stock

Prime-Line MP11134-1 Pin Hinge

  • All components of these hinges are constructed of steel, hinge leafs, hinge pins and fasteners.
  • All components come in a corrosion resistant, oil rubbed bronze plated finish, to include the hinge pins, leafs and fasteners.
  • Designed for use with interior hinged swinging doors.
  • Feature three offset mounting holes per leaf, with tapered edges to allow for flush fitting fasteners.
  • Easy to install with only a few simple tools.
  • For further dimensional and specification information, please see the line drawing.
Check Stock

Swpeet 84Pcs 10 Sizes Zinc Plated Mini Fuel Injection Line Style Hose Clamp Assortment Kit Perfect for Automotive, Agriculture, Plant & Construction

  • It is used as a car hose separator clamp fuel line mounting divider hose fitting adapter..
  • Made of aluminum alloy, rust proof, anti corrosion, waterproof, oil proof, durable in use..
  • Detail Size: 50x23x12mm / 1.97"x0.91"x0.47"(L*W*H).
  • Easy to install and convenient to use. Universal fit for AN8 gas/water/oil/fuel brake hose..
  • Package Include: 4 Pcs x AN8 Hose Separator Clamps..
Check Stock